MINT1022A1205I01

MINT1022A1205I01 Datasheet

MINT1022

Part	Datasheet
MINT1022A1205I01	MINT1022A1205I01 (pdf)

Related Parts	Information
MINT1022A2405I01	MINT1022A2405I01
MINT1022A0505I01	MINT1022A0505I01

PDF Datasheet Preview
MINT1022 22 Watt Single Output Series Medical - Universal Input Power Supply • 90-264 VAC Input • Overvoltage and Short Circuit Protection • Compact Size, Low Profile x • Approved to UL, CSA and EN Standards • CE Compliant LVD, EMC, RoHS • Low Standby Power Loss W International Safety Standard Approvals Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated Output Specifications Output Power Natural Convection Minimum Load Total Regulation Rise Time Transient Response Line and Load At turn-on 50% step load, 0.2A/us Temperature Coefficient Overvoltage Protection Voltage Adjustability Input Specifications Voltage Universal Input Frequency Input Surge Current Earth leakage current Thermistor limited 264V, 60Hz Input Current Input Fuse 120VAC 230VAC Watts continuous, 24 W peak for 60 seconds, 10% duty cycle Not required see table 100 ms max. max. dev., msec max. recovery to C typical Standard - See chart set with fixed resistors to maximize reliability Nominal 100-240VAC 47-63Hz 32A max. uA max. 200 uA single fault 0.45A 0.25A A Environmental Specifications Thermal Performance Operating ambient see ratings chart Non-operating 0-50° C 50-70° C ambient Relative Humidity Non-condensing Maximum Altitude Operating /non-operating Vibration 5Hz-500Hz Shock Per MIL-STD-810E 0-70° C -40 to +85° C Full load. See table. derate to 50% 0-95% RH 10,000 ft./40,000 ft. max. g rms part IV General Specifications Hold-up Time 120VAC, 60Hz 15ms min. at 22W output Efficiency

PDF Datasheet Preview

MINT1022
22 Watt Single Output Series

Medical - Universal Input Power Supply
• 90-264 VAC Input
• Overvoltage and Short Circuit Protection
• Compact Size, Low Profile x
• Approved to UL, CSA and EN Standards
• CE Compliant LVD, EMC, RoHS
• Low Standby Power Loss W

International Safety Standard Approvals

Specifications

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

Output Specifications

Output Power

Natural Convection

Minimum Load Total Regulation Rise Time Transient Response

Line and Load At turn-on 50% step load, 0.2A/us

Temperature Coefficient Overvoltage Protection Voltage Adjustability

Input Specifications

Voltage

Universal Input

Frequency Input Surge Current Earth leakage current

Thermistor limited 264V, 60Hz

Input Current Input Fuse
120VAC 230VAC

Watts continuous, 24 W peak for 60 seconds, 10% duty cycle Not required see table 100 ms max. max. dev., msec max. recovery to C typical Standard - See chart set with fixed resistors to maximize reliability

Nominal 100-240VAC 47-63Hz 32A max. uA max. 200 uA single fault 0.45A 0.25A A

Environmental Specifications

Thermal Performance

Operating ambient see ratings chart Non-operating 0-50° C 50-70° C ambient

Relative Humidity

Non-condensing

Maximum Altitude

Operating /non-operating

Vibration
5Hz-500Hz

Shock

Per MIL-STD-810E
0-70° C
-40 to +85° C Full load. See table. derate to 50% 0-95% RH 10,000 ft./40,000 ft. max.
g rms part IV

General Specifications

Hold-up Time
120VAC, 60Hz
15ms min. at 22W output

Efficiency

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MINT1022A1205I01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MINT1022A1205I01 506451