MENB1030A1803C01

MENB1030A1803C01 Datasheet


MENB1030

Part Datasheet
MENB1030A1803C01 MENB1030A1803C01 MENB1030A1803C01 (pdf)
Related Parts Information
MENB1030A1503C01 MENB1030A1503C01 MENB1030A1503C01
MENB1030A4803C01 MENB1030A4803C01 MENB1030A4803C01
MENB1030A4803F01 MENB1030A4803F01 MENB1030A4803F01
MENB1030A0503N01 MENB1030A0503N01 MENB1030A0503N01
MENB1030A0703C01 MENB1030A0703C01 MENB1030A0703C01
MENB1030A0703N01 MENB1030A0703N01 MENB1030A0703N01
MENB1030A1403C01 MENB1030A1403C01 MENB1030A1403C01
MENB1030A0503C01 MENB1030A0503C01 MENB1030A0503C01
MENB1030A1403N01 MENB1030A1403N01 MENB1030A1403N01
MENB1030A0703F01 MENB1030A0703F01 MENB1030A0703F01
MENB1030A1503F01 MENB1030A1503F01 MENB1030A1503F01
MENB1030A1503N01 MENB1030A1503N01 MENB1030A1503N01
MENB1030A1803F01 MENB1030A1803F01 MENB1030A1803F01
MENB1030A1803N01 MENB1030A1803N01 MENB1030A1803N01
MENB1030A2403N01 MENB1030A2403N01 MENB1030A2403N01
MENB1030A4803N01 MENB1030A4803N01 MENB1030A4803N01
MENB1030A1403F01 MENB1030A1403F01 MENB1030A1403F01
MENB1030A0903N01 MENB1030A0903N01 MENB1030A0903N01
MENB1030A0503B01 MENB1030A0503B01 MENB1030A0503B01
MENB1030A0903B01 MENB1030A0903B01 MENB1030A0903B01
MENB1030A1203B01 MENB1030A1203B01 MENB1030A1203B01
MENB1030A2403B01 MENB1030A2403B01 MENB1030A2403B01
PDF Datasheet Preview
MENB1030

Universal 30 Watt Series Medical Switch-Mode Power Supply
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,

EU EC No 278/2009 Phase II
•Certified to 3rd Edition
•5V to 48V outputs, up to 32W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption <0.3W
•Desktop & Wall Plug Styles
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input
100-240VAC, -/-10%, 47-63 Hz,

Input Current
100VAC 0.9A

Inrush Current
60A peak, 264Vac, cold start

Input Fuse
3.15A Internal Primary Current Fuse is provided

Efficiency Output Voltage

Meets EISA2007, CEC Efficiency Level V, and EU EC No. 278/2009 Phase II requirements

See chart

Output Power

See chart

Ripple and Noise
1% pk-pk max., 20MHz BW

Line & Load Voltage Regulation

Line +/- 1%, Load +/-5%

Transient Response Minimum Load Case Material Case Dimensions:

Output Connector:
500µs max., 50% load step, typical

Not required

Black 94V0 Polycarbonate
95 x 54 x 31mm. See outline drawing Weight = 200g
2.5mm barrel type Ault #3 connector, center contact Other options available

MTBF Hold-up Time Turn-on Time Topology Overload Protection
>100,000 hours calculated 18 ms min. 115VAC, 60 msec 230VAC
2 seconds, max. Switching Fixed Frequency Flyback

Hiccup Mode

Short Circuit Protection EMC Safety Standards Dielectric Withstand

Operating Temperature Storage Temperature Relative Humidity Altitude

Hiccup Mode See chart below EN/IEC/CSA/UL60601-1, 3rd Edition Input-Output 5,656VDC, Input-GND 1,500 Vac, Output-GND 500Vdc 0° to 40°C, no derating
-30 to +85°C 5% to 95%, non-condensing
More datasheets: MENB1030A4803F01 | MENB1030A0503N01 | MENB1030A0703C01 | MENB1030A0703N01 | MENB1030A1403C01 | MENB1030A0503C01 | MENB1030A1403N01 | MENB1030A0703F01 | MENB1030A1503F01 | MENB1030A1503N01


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MENB1030A1803C01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MENB1030A1803C01 506439