CENB1100A1803F01

CENB1100A1803F01 Datasheet

CENB1100

Part	Datasheet
CENB1100A1803F01	CENB1100A1803F01 (pdf)

Related Parts	Information
CENB1100A1551F01	CENB1100A1551F01
CENB1100A2403F01	CENB1100A2403F01
CENB1100A1251F01	CENB1100A1251F01
CENB1100A4803F01	CENB1100A4803F01

PDF Datasheet Preview
CENB1100 Universal Input 100 Watt Series ITE Switch-Mode Power Supply •100-240VAC Universal Input •Meets EISA2007, CEC Efficiency Level V, EU EC No 278/2009 Phase II •Desktop Style •12V to 48V Single Output Models, up to 100W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W •Meets UL/EN/IEC60950-1, 2nd Edition 3 Year Warranty Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input Current 100-240Vac, +/-10%, 47-63 Hz, MTBF 100 Vac A Hold-up Time 100,000 hours calculated 18 ms min. 115Vac, 60 ms min. 230 Vac Inrush Current 60A peak 264Vac, cold start Overload Protection Hiccup Mode Input Fuse Efficiency Output Voltage 3.15A, 250V Internal Primary Current Fuse provided Meets International Efficiency Level V See chart Output Power See chart Ripple and Noise Line/Load Regulation Transient Response Minimum Load Case Material 1% pk-pk max., 20MHz BW Excluding Cord Line +/- 1%, Load +/-5% 500us max., 50% load step, typical Not required Black 94V0 Polycarbonate Case Dimensions 150mm x 87mm x 47mm, see mechanical drawing Short Circuit Protection Hiccup Mode Topology Safety and EMC Approvals Switching Fixed Frequency Flyback EN/IEC/CSA/UL60950-1, 2nd Edition EMC See chart Dielectric Withstand Input-Output 4,242Vdc Input-GND 1,500Vac, Output-GND 500Vdc Operating Temperature 0° to 40°C, no derating Storage Temperature -30 to +85°C Relative Humidity 5% to 95%, non-condensing Altitude 0 to 10,000 ft Output Connections Cable 18AWG, 1,200mm, 4 conductor Connector Ault #3, 2.5mm or Ault #51, 6-pin Molex

PDF Datasheet Preview

CENB1100

Universal Input 100 Watt Series

ITE Switch-Mode Power Supply
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,

EU EC No 278/2009 Phase II
•Desktop Style
•12V to 48V Single Output Models, up to 100W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W
•Meets UL/EN/IEC60950-1, 2nd Edition
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input Current
100-240Vac, +/-10%, 47-63 Hz, MTBF 100 Vac A Hold-up Time
100,000 hours calculated 18 ms min. 115Vac, 60 ms min. 230 Vac

Inrush Current
60A peak 264Vac, cold start Overload Protection

Hiccup Mode

Input Fuse Efficiency Output Voltage
3.15A, 250V Internal Primary Current Fuse provided Meets International Efficiency Level V See chart

Output Power

See chart

Ripple and Noise Line/Load Regulation Transient Response Minimum Load Case Material
1% pk-pk max., 20MHz BW Excluding Cord Line +/- 1%, Load +/-5%
500us max., 50% load step, typical Not required

Black 94V0 Polycarbonate

Case Dimensions 150mm x 87mm x 47mm, see mechanical drawing

Short Circuit Protection

Hiccup Mode

Topology Safety and EMC Approvals

Switching Fixed Frequency Flyback

EN/IEC/CSA/UL60950-1, 2nd Edition EMC See chart

Dielectric Withstand

Input-Output 4,242Vdc Input-GND 1,500Vac, Output-GND 500Vdc

Operating Temperature
0° to 40°C, no derating

Storage Temperature
-30 to +85°C

Relative Humidity
5% to 95%, non-condensing

Altitude
0 to 10,000 ft

Output Connections

Cable 18AWG, 1,200mm, 4 conductor

Connector Ault #3, 2.5mm or Ault #51, 6-pin Molex

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CENB1100A1803F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: CENB1100A1803F01 506287