CENB1080A4803F01

CENB1080A4803F01 Datasheet

CENB1080

Part	Datasheet
CENB1080A4803F01	CENB1080A4803F01 (pdf)

Related Parts	Information
CENB1080A1503F01	CENB1080A1503F01
CENB1080A1803F01	CENB1080A1803F01
CENB1080A2403F01	CENB1080A2403F01
CENB1080A1251F01	CENB1080A1251F01

PDF Datasheet Preview
CENB1080 Universal Input 80 Watt Series ITE Switch-Mode Power Supply •100-240VAC Universal Input •Meets EISA2007, CEC Efficiency Level V, EU EC No 278/2009 Phase II •Desktop Style •12V to 48V Single Output Models, up to 80W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W •Certified to UL/EN/IEC60950-1, 2nd Edition 3 Year Warranty Specifications AC Input All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. 100-240Vac, +/-10%, 47-63 Hz, MTBF >100,000 hours calculated Input Current 100Vac 1.5A Hold-up Time 18 ms min. 115Vac, 60 ms min. 230 Vac Inrush Current 60A peak 264Vac, cold start Overload Protection Hiccup Mode Input Fuse 3.15A, 250V Internal Primary Current Fuse provided Short Circuit Protection Hiccup Mode Efficiency Output Voltage Output Power Ripple and Noise Meets International Efficiency Level V See chart See chart 1% pk-pk max., 20MHz BW Topology Switching Fixed Frequency Flyback Safety and EMC Approvals EN/IEC/CSA/UL60950-1, 2nd Edition EMC See chart Dielectric Withstand Input-Output 4,242Vdc Input-GND 1,500 Vac, Output-GND 500Vdc Operating Temperature 0° to 40°C, no derating Line/Load Regulation Line +/- 1 to 2%, Load +/-5% at end of cable Storage Temperature -30 to +85°C Transient Response 500us max., 50% load step, typical Relative Humidity 5% to 95%, non-condensing Minimum Load Not required Altitude 0 to 10,000 ft

PDF Datasheet Preview

CENB1080

Universal Input 80 Watt Series

ITE Switch-Mode Power Supply
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,

EU EC No 278/2009 Phase II
•Desktop Style
•12V to 48V Single Output Models, up to 80W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W
•Certified to UL/EN/IEC60950-1, 2nd Edition
3 Year Warranty

Specifications

AC Input

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
100-240Vac, +/-10%, 47-63 Hz, MTBF
>100,000 hours calculated

Input Current
100Vac 1.5A Hold-up Time
18 ms min. 115Vac, 60 ms min. 230 Vac

Inrush Current
60A peak 264Vac, cold start Overload Protection

Hiccup Mode

Input Fuse
3.15A, 250V Internal Primary Current Fuse provided Short Circuit Protection

Hiccup Mode

Efficiency Output Voltage Output Power Ripple and Noise

Meets International Efficiency Level V See chart See chart
1% pk-pk max., 20MHz BW

Topology

Switching Fixed Frequency Flyback

Safety and EMC Approvals

EN/IEC/CSA/UL60950-1, 2nd Edition

EMC See chart

Dielectric Withstand

Input-Output 4,242Vdc

Input-GND 1,500 Vac, Output-GND 500Vdc

Operating Temperature
0° to 40°C, no derating

Line/Load Regulation Line +/- 1 to 2%, Load +/-5% at end of cable Storage Temperature
-30 to +85°C

Transient Response
500us max., 50% load step, typical Relative Humidity
5% to 95%, non-condensing

Minimum Load

Not required Altitude
0 to 10,000 ft

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CENB1080A4803F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: CENB1080A4803F01 506285