DKBLE113

DKBLE113 Datasheet

Part	Datasheet
DKBLE113	DKBLE113 (pdf)

Related Parts	Information
BLE113-A-V1	BLE113-A-V1

PDF Datasheet Preview
BLE113 DATA SHEET Wednesday, 27 November 2013 Version Copyright 2000-2013 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version Comment Draft Confidential watermark added Marketing information updated Current consumption, recommended land pattern, layout guide, example schematic, antenna characteristics Minor changes Absolute maximum ratings all supply nets must have the same voltage Pin dimensions and recommended land pattern FCC and IC statements TXP vs HW config setting Dimensions CE, MIC Japan, KCC Chapter rephrased Missing dimensions added to Figure 7 Preliminary datasheet -> production datasheet. No changes Pull-up resistors added to P1_0 and P1_1 in the example schematic 5 mm restriction removed from the FCC statement Bluegiga Technologies Oy TABLE OF CONTENTS 1 BLE113 Product numbering 2 Pinout and Terminal Description I/O Ports 10 Electrical Characteristics 11 Absolute Maximum Ratings 11 Recommended Operating Conditions 11 DC Characteristics 11 Current Consumption 12 Antenna characteristics 13 3 Physical Dimensions 16 4 Power-On Reset and Brownout Detector 18 5 Design Guidelines 19 General Design Guidelines 19 Layout Guide Lines 19 BLE113-A Layout Guide 20 6 Soldering Recommendations 22 7 Block diagram 23 8 Certifications 26 Bluetooth 26 FCC and IC 26 CE 29 MIC Japan 29 KCC Korea 29 9 Contact Information 30 Bluegiga Technologies Oy BLE113 Smart Module BLE113 is a Bluetooth Smart module targeted for small and low power sensors and accessories. It integrates all features required for a Bluetooth Smart application Bluetooth radio, software stack and GATT based profiles. BLE113 Bluetooth Smart module can also host end user applications, which means no external micro controller is required in size or price constrained devices. BLE113 module has flexible hardware interfaces to connect to different peripherals and sensors. BLE113 can be powered directly from a standard 3V coin cell battery or pair of AAA batteries. In lowest power sleep mode it consumes only 500nA and will wake up in few hundred microseconds. APPLICATIONS: • Health and fitness sensors • Medical sensors • iPhone and iPad accessories • Security and proximity tags • Key fobs • Smart home sensors and collectors • Wireless keys • HID keyboards and mice KEY FEATURES: • Bluetooth v. single mode compliant o Supports master and slave modes o Up to eight connections • Integrated Bluetooth Smart stack o GAP, GATT, L2CAP and SMP o Bluetooth Smart profiles • Radio performance o TX power 0 dBm to -23 dBm o Receiver sensitivity -93 dBm • Ultra low current consumption o Transmit mA 0dBm o Transmit mA 0dBm + DC/DC o Receive mA o Sleep mode 3 uA • Flexible peripheral interfaces o UART and SPI o I2C, PWM and GPIO o 12-bit ADC • Host interfaces o UART • Programmable 8051 processor for standalone operation • Dimensions x mm • Bluetooth, CE, FCC, IC, South Korea and Japan qualified Bluegiga Technologies Oy 1 BLE113 Product numbering Antenna: = Internal = External = RF pin BLE113-A-X Available products and product codes Product code BLE113-A-v1

PDF Datasheet Preview

BLE113

DATA SHEET

Wednesday, 27 November 2013 Version

Copyright 2000-2013 Bluegiga Technologies

All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners.

Bluegiga Technologies Oy

VERSION HISTORY Version

Comment

Draft Confidential watermark added Marketing information updated Current consumption, recommended land pattern, layout guide, example schematic, antenna characteristics Minor changes Absolute maximum ratings all supply nets must have the same voltage Pin dimensions and recommended land pattern FCC and IC statements TXP vs HW config setting Dimensions CE, MIC Japan, KCC Chapter rephrased Missing dimensions added to Figure 7 Preliminary datasheet -> production datasheet. No changes Pull-up resistors added to P1_0 and P1_1 in the example schematic 5 mm restriction removed from the FCC statement

Bluegiga Technologies Oy

TABLE OF CONTENTS
1 BLE113 Product numbering 2 Pinout and Terminal Description

I/O Ports 10 Electrical Characteristics 11 Absolute Maximum Ratings 11 Recommended Operating Conditions 11 DC Characteristics 11 Current Consumption 12 Antenna characteristics 13 3 Physical Dimensions 16 4 Power-On Reset and Brownout Detector 18 5 Design Guidelines 19 General Design Guidelines 19 Layout Guide Lines 19 BLE113-A Layout Guide 20 6 Soldering Recommendations 22 7 Block diagram 23 8 Certifications 26 Bluetooth 26 FCC and IC 26 CE 29 MIC Japan 29 KCC Korea 29 9 Contact Information 30

Bluegiga Technologies Oy

BLE113 Smart Module

BLE113 is a Bluetooth Smart module targeted for small and low power sensors and accessories. It integrates all features required for a Bluetooth Smart application Bluetooth radio, software stack and GATT based profiles.

BLE113 Bluetooth Smart module can also host end user applications, which means no external micro controller is required in size or price constrained devices.

BLE113 module has flexible hardware interfaces to connect to different peripherals and sensors. BLE113 can be powered directly from a standard 3V coin cell battery or pair of AAA batteries.

In lowest power sleep mode it consumes only 500nA and will wake up in few hundred microseconds.

APPLICATIONS:
• Health and fitness sensors
• Medical sensors
• iPhone and iPad accessories
• Security and proximity tags
• Key fobs
• Smart home sensors and collectors
• Wireless keys
• HID keyboards and mice

KEY FEATURES:
• Bluetooth v. single mode compliant o Supports master and slave modes o Up to eight connections
• Integrated Bluetooth Smart stack o GAP, GATT, L2CAP and SMP o Bluetooth Smart profiles
• Radio performance o TX power 0 dBm to -23 dBm o Receiver sensitivity -93 dBm
• Ultra low current consumption o Transmit mA 0dBm o Transmit mA 0dBm + DC/DC o Receive mA o Sleep mode 3 uA
• Flexible peripheral interfaces o UART and SPI o I2C, PWM and GPIO o 12-bit ADC
• Host interfaces o UART
• Programmable 8051 processor for standalone operation
• Dimensions x mm
• Bluetooth, CE, FCC, IC, South Korea and

Japan qualified

Bluegiga Technologies Oy
1 BLE113 Product numbering

Antenna:
= Internal
= External
= RF pin

BLE113-A-X

Available products and product codes

Product code

BLE113-A-v1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DKBLE113 Datasheet file may be downloaded here without warranties.

Datasheet ID: DKBLE113 521926