BLE113-A-M256K

BLE113-A-M256K Datasheet

BLE113

Part	Datasheet
BLE113-A-M256K	BLE113-A-M256K (pdf)

PDF Datasheet Preview
BLE113 DATA SHEET Friday, 06 March 2015 Version Copyright 2000-2015 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version Comment Preliminary datasheet -> production datasheet. No changes Pull-up resistors added to P1_0 and P1_1 in the example schematic 5 mm restriction removed from the FCC statement Product code for 256k variant added. Peripheral mapping table analog comparator added. Added note that pins configured as peripheral I/O signals do not have pull-up / -down capability. RF Characteristics added. Product numbering updated CE info Updated FCC ID in one incorrect location PIO current drive capability figures added Current consumption profile added SPI slave mode removed Bluegiga Technologies Oy TABLE OF CONTENTS 1 BLE113 Product numbering 2 Pinout and Terminal Description I/O Ports 10 Electrical Characteristics 11 Absolute Maximum Ratings 11 Recommended Operating Conditions 11 DC Characteristics 11 Current Consumption 13 RF 14 Antenna characteristics 15 3 Physical Dimensions 18 4 Power-On Reset and Brownout Detector 20 5 Design Guidelines 21 General Design Guidelines 21 Layout Guide Lines 21 BLE113-A Layout Guide 22 6 Soldering Recommendations 24 7 Block diagram 25 8 Certifications 28 Bluetooth 28 FCC and IC 28 FCC et IC 29 CE 31 MIC Japan 31 KCC Korea 31 9 Contact Information 32 Bluegiga Technologies Oy BLE113 Smart Module BLE113 is a Bluetooth Smart module targeted for small and low power sensors and accessories. It integrates all features required for a Bluetooth Smart application Bluetooth radio, software stack and GATT based profiles. BLE113 Bluetooth Smart module can also host end user applications, which means no external micro controller is required in size or price constrained devices. BLE113 module has flexible hardware interfaces to connect to different peripherals and sensors. BLE113 can be powered directly from a standard 3V coin cell battery or pair of AAA batteries. In lowest power sleep mode it consumes only 500nA and will wake up in few hundred microseconds. APPLICATIONS: • Health and fitness sensors • Medical sensors • iPhone and iPad accessories • Security and proximity tags • Key fobs • Smart home sensors and collectors • Wireless keys • HID keyboards and mice KEY FEATURES: • Bluetooth v. single mode compliant o Supports master and slave modes o Up to eight connections • Integrated Bluetooth Smart stack o GAP, GATT, L2CAP and SMP o Bluetooth Smart profiles • Radio performance o TX power 0 dBm to -23 dBm o Receiver sensitivity -93 dBm • Ultra low current consumption o Transmit mA 0dBm o Transmit mA 0dBm + DC/DC o Receive mA o Sleep mode 3 uA • Flexible peripheral interfaces o UART and SPI o I2C, PWM and GPIO o 12-bit ADC • Host interfaces o UART • Programmable 8051 processor for standalone operation • Dimensions x mm • Bluetooth, CE, FCC, IC, South Korea and Japan qualified Bluegiga Technologies Oy 1 BLE113 Product numbering Product code BLE113-A BLE113-A-M256K BLE113 with integrated chip antenna, 128k flash memory BLE113 with integrated chip antenna, 256k flash memory Bluegiga Technologies Oy Page 6 of 32 2 Pinout and Terminal Description 1 GND 2 GND 3 GND 4 GND 5 GND 6 GND 7 GND 8 AVDD 9 P2_2 10 P2_1 11 P2_0 12 P1_7 13 P1_6 14 SCL 15 SDA 16 NC 17 DVDD 18 GND

PDF Datasheet Preview

BLE113

DATA SHEET

Friday, 06 March 2015 Version

Copyright 2000-2015 Bluegiga Technologies

All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners.

Bluegiga Technologies Oy

VERSION HISTORY Version

Comment

Preliminary datasheet -> production datasheet. No changes Pull-up resistors added to P1_0 and P1_1 in the example schematic 5 mm restriction removed from the FCC statement Product code for 256k variant added. Peripheral mapping table analog comparator added. Added note that pins configured as peripheral I/O signals do not have pull-up / -down capability. RF Characteristics added. Product numbering updated CE info Updated FCC ID in one incorrect location PIO current drive capability figures added Current consumption profile added SPI slave mode removed

Bluegiga Technologies Oy

TABLE OF CONTENTS
1 BLE113 Product numbering 2 Pinout and Terminal Description

I/O Ports 10 Electrical Characteristics 11 Absolute Maximum Ratings 11 Recommended Operating Conditions 11 DC Characteristics 11 Current Consumption 13 RF 14 Antenna characteristics 15 3 Physical Dimensions 18 4 Power-On Reset and Brownout Detector 20 5 Design Guidelines 21 General Design Guidelines 21 Layout Guide Lines 21 BLE113-A Layout Guide 22 6 Soldering Recommendations 24 7 Block diagram 25 8 Certifications 28 Bluetooth 28 FCC and IC 28

FCC et IC 29 CE 31 MIC Japan 31 KCC Korea 31 9 Contact Information 32

Bluegiga Technologies Oy

BLE113 Smart Module

BLE113 is a Bluetooth Smart module targeted for small and low power sensors and accessories. It integrates all features required for a Bluetooth Smart application Bluetooth radio, software stack and GATT based profiles.

BLE113 Bluetooth Smart module can also host end user applications, which means no external micro controller is required in size or price constrained devices.

BLE113 module has flexible hardware interfaces to connect to different peripherals and sensors. BLE113 can be powered directly from a standard 3V coin cell battery or pair of AAA batteries.

In lowest power sleep mode it consumes only 500nA and will wake up in few hundred microseconds.

APPLICATIONS:
• Health and fitness sensors
• Medical sensors
• iPhone and iPad accessories
• Security and proximity tags
• Key fobs
• Smart home sensors and collectors
• Wireless keys
• HID keyboards and mice

KEY FEATURES:
• Bluetooth v. single mode compliant o Supports master and slave modes o Up to eight connections
• Integrated Bluetooth Smart stack o GAP, GATT, L2CAP and SMP o Bluetooth Smart profiles
• Radio performance o TX power 0 dBm to -23 dBm o Receiver sensitivity -93 dBm
• Ultra low current consumption o Transmit mA 0dBm o Transmit mA 0dBm + DC/DC o Receive mA o Sleep mode 3 uA
• Flexible peripheral interfaces o UART and SPI o I2C, PWM and GPIO o 12-bit ADC
• Host interfaces o UART
• Programmable 8051 processor for standalone operation
• Dimensions x mm
• Bluetooth, CE, FCC, IC, South Korea and

Japan qualified

Bluegiga Technologies Oy
1 BLE113 Product numbering

Product code

BLE113-A BLE113-A-M256K

BLE113 with integrated chip antenna, 128k flash memory BLE113 with integrated chip antenna, 256k flash memory

Bluegiga Technologies Oy

Page 6 of 32
2 Pinout and Terminal Description
1 GND 2 GND 3 GND 4 GND 5 GND 6 GND 7 GND 8 AVDD 9 P2_2 10 P2_1 11 P2_0 12 P1_7 13 P1_6 14 SCL 15 SDA 16 NC 17 DVDD 18 GND

More datasheets: 1309X202 | 1309W102 | 1309X100 | 1309X101 | 1309X102 | 1309W101 | 1309W100 | 1309P503 | 1309P502 | 1309W502

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BLE113-A-M256K Datasheet file may be downloaded here without warranties.

Datasheet ID: BLE113-A-M256K 521925