B39901B8763P810S99

B39901B8763P810S99 Datasheet


B8763 B39901-B8763-P810

Part Datasheet
B39901B8763P810S99 B39901B8763P810S99 B39901B8763P810S99 (pdf)
Related Parts Information
B39901B8763P810S5 B39901B8763P810S5 B39901B8763P810S5
B39901B8763P810S1 B39901B8763P810S1 B39901B8763P810S1
B39901B8763P810A5 B39901B8763P810A5 B39901B8763P810A5
B39901B8763P810 B39901B8763P810 B39901B8763P810
PDF Datasheet Preview
SAW Components

SAW filter
Series/type Ordering code:

Date Version:

B8763 B39901-B8763-P810

June 30, 2010

EPCOS AG Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

B8763 MHz

ORIGINATOR

LP92H_v1.0 M. Jungkunz

B8763_v1.0 M. Jungkunz

B8763_v2.0 TAY Wee Chuan

DETAILED SPECIFICATION CHANGES
initial release

Oct 17, 2008
introduction of filter type name
added reference to ISDB-TB

Feb 13, 2009
added power durability value for GSM850 Tx
ordering code added

Jun 30, 2010

Please read cautions and warnings and important notes at the end of this document.
2 June 30, 2010

SAW Components

SAW filter

Data Sheet

Application
s Low-loss RF band-stop filter for DVB-H and ISDB-TB
s GSM900 Tx suppression s Very low insertion loss s Very low amplitude ripple and group delay ripple s Usable passband of 280 MHz up to 328 MHz s Impedance at input and output 50 s Unbalanced to unbalanced operation

B8763 MHz
s Package size x mm3 s Maximum height of mm s Package code QCS5P s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD
bottom view side view top view

Pin configuration
s1 s4 s3 s 2,5

Input unbalanced Output unbalanced External coupling coil Case ground

Please read cautions and warnings and important notes at the end of this document.
3 June 30, 2010

SAW Components SAW filter Data Sheet

Characteristics Temperature range for specification Terminating source impedance Terminating load impedance:

B8763 MHz

T = +25 ± 2 ZS = 50 and matching network ZL = 50 and matching network

Nominal center frequency
min.
typ. 25
max.

Minimum insertion attenuation
αmax

Maximum insertion attenuation
αmax

Attenuation

Group delay ripple p-p

Matching network

Ls1 1
4 Cs4

Ls1 = 18 nH Lp2 = 20 nH Ls3 = 13 nH Cs4 = pF

Q factor of inductors 40 770 MHz

Please read cautions and warnings and important notes at the end of this document.
4 June 30, 2010

SAW Components SAW filter Data Sheet

Characteristics Temperature range for specification Terminating source impedance Terminating load impedance:
References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible

Moldability Matching coils

B8763

B39901-B8763-P810

C61157-A8-A9

F61074-V8212-Z000

L_1126

LP92H_WB_UN.s3p unmatched LP92H_WB.s2p matched

S_6001
defined as compatible with the following documents "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment."

Before using in overmolding environment, please contact your EPCOS sales office.
for a large variety of matching coils.

For further information please contact your local EPCOS sales office or visit our webpage at

Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

Please read cautions and warnings and important notes at the end of this document.
8 June 30, 2010

Important notes

The following applies to all products named in this publication:

Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application.

We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component.

The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at
9 June 30, 2010
More datasheets: ATR11-C-Y-63-BB-12.0A | ATR11-C-Y-63-BB-10.0A | ATR11-C-X-63-BB-8.0A | ATR11-C-X-63-BB-7.0A | ATR11-C-X-63-BB-6.0A | ATR11-D-X-63-WB-3.0A | ATR11-D-X-63-WB-7.0A | 16-213UYC/S530-A6/TR8 | DSK-3R3H224U-HL | DS-2R5H224U-HL


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B39901B8763P810S99 Datasheet file may be downloaded here without warranties.

Datasheet ID: B39901B8763P810S99 511386