B39242B9410K610

B39242B9410K610 Datasheet

Ordering Code B39242B9410K610

Part	Datasheet
B39242B9410K610	B39242B9410K610 (pdf)

PDF Datasheet Preview
SAW filters for mobile communications Series/Type B9410 The following products presented in this data sheet are being withdrawn. Ordering Code B39242B9410K610 Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments 2009-07-31 2009-11-30 2010-02-28 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at SAW Components SAW filter Data Sheet Application s Low-loss RF filter for mobile telephone bluetooth systems s Impedance transformation from 50 to 150 s Unbalanced to balanced operation s Very low insertion attenuation s Low amplitude ripple s Usable passband MHz B9410 MHz s Package size x1.1 x mm3 s Package code QCS5F s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD Pin configuration s1 s 3,4 s 2,5 Input unbalanced Output balanced To be grounded 0,325 1 0,25 23 54 0,5 0,5 0,575 bottom view side view top view Please read cautions and warnings and important notes at the end of this document. 2 April 15, 2008 SAW Components SAW filter Data Sheet Characteristics Temperature range for specification Terminating source impedance Terminating load impedance: B9410 MHz T = to +75 ZS = 50 ZL = 150 \|\| 11 nH balanced Center frequency min. typ. max. Maximum insertion attenuation αmax 5 MHz Amplitude ripple p-p 5 MHz Input VSWR 5 MHz Output VSWR 5 MHz Common mode suppression MHz Output amplitude balance \|S31/S21\| MHz Output phase balance MHz Attenuation References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible Moldability B9410 MHz B9410 B39242B9410K610 C61157-A8-A1 F61074-V8212-Z000 L_1126 LP14E_NB.s3p LP14E_WB.s3p S_6001 defined as compatible with the following documents "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 April 15, 2008 Important notes The following applies to all products named in this publication: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as “hazardous” . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at 8 April 15, 2008

PDF Datasheet Preview

SAW filters for mobile communications

Series/Type B9410

The following products presented in this data sheet are being withdrawn.
Ordering Code B39242B9410K610

Substitute Product

Date of Withdrawal Deadline Last Orders Last Shipments
2009-07-31
2009-11-30
2010-02-28

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

SAW Components SAW filter

Data Sheet

Application
s Low-loss RF filter for mobile telephone bluetooth systems
s Impedance transformation from 50 to 150 s Unbalanced to balanced operation s Very low insertion attenuation s Low amplitude ripple s Usable passband MHz

B9410 MHz
s Package size x1.1 x mm3 s Package code QCS5F s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD

Pin configuration
s1 s 3,4 s 2,5

Input unbalanced Output balanced To be grounded
0,325 1
0,25 23
54 0,5 0,5
0,575
bottom view side view top view

Please read cautions and warnings and important notes at the end of this document.
2 April 15, 2008

SAW Components SAW filter Data Sheet

Characteristics Temperature range for specification Terminating source impedance Terminating load impedance:

B9410 MHz

T = to +75 ZS = 50 ZL = 150 || 11 nH balanced

Center frequency
min. typ. max.

Maximum insertion attenuation
αmax
5 MHz

Amplitude ripple p-p
5 MHz

Input VSWR 5 MHz

Output VSWR 5 MHz

Common mode suppression MHz

Output amplitude balance |S31/S21| MHz

Output phase balance MHz

Attenuation
References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible

Moldability

B9410 MHz

B9410 B39242B9410K610 C61157-A8-A1 F61074-V8212-Z000 L_1126 LP14E_NB.s3p LP14E_WB.s3p S_6001 defined as compatible with the following documents "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Before using in overmolding environment, please contact your EPCOS sales office.

For further information please contact your local EPCOS sales office or visit our webpage at

Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

Please read cautions and warnings and important notes at the end of this document.
7 April 15, 2008

Important notes

The following applies to all products named in this publication:

Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application.

We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component.

The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as “hazardous” . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at
8 April 15, 2008

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B39242B9410K610 Datasheet file may be downloaded here without warranties.

Datasheet ID: B39242B9410K610 511268