B39242B8831P810

B39242B8831P810 Datasheet

B8831 B39242B8831P810

Part	Datasheet
B39242B8831P810	B39242B8831P810 (pdf)

PDF Datasheet Preview
SAW Components BAW Bluetooth/WLAN Filter Datasheet Series/type Ordering code: Date Version: B8831 B39242B8831P810 August 18, 2014 EPCOS AG Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components BAW Bluetooth/WLAN Filter Datasheet Application s Low-loss BAW RF single filter for Bluetooth/WLAN with LTE Band 7 / Band 40 / Band 41 coexistence s Usable passband MHz s Unbalanced to unbalanced operation s Excellent insertion loss s High out of band selectivity s Filter impedance 50 B8831 MHz s Package size x mm3 s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD s Moisture Sensitivity Level 3 MSL 3 Pin configuration s1 s4 s 2,3,5,6 Input unbalanced Output unbalanced To be grounded bottom view 0.45max side view top view Please read cautions and warnings and important notes at the end of this document. 2 August 18, 2014 SAW Components BAW Bluetooth/WLAN Filter Datasheet Characteristics of Filter Temperature range for specification Terminating source impedance Terminating load impedance: B8831 MHz T = to +85 ZS = 50 shunt coil nH ZL = 50 shunt coil nH Characteristics Center frequency B8831 min. typ. max. Maximum insertion attenuation - WLAN1 αmax MHz channel 1 MHz channel 2 1 MHz channel 3-10 1 MHz channel 11 1 MHz channel 12 1 MHz channel 13 1 VSWR Input and Output MHz channel 1-12 MHz channel 13 Attenuation α MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2nd Harmonics CW tone at input, 2442 MHz, 22 dBm 1 Averaged values within each WiFi channel width of MHz 2 Averaged value of linear S-parameter over 5 MHz 3 to Please read cautions and warnings and important notes at the end of this document. 3 August 18, 2014 Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible Moldability Matching coils B8831 B39242B8831P810 C61157-A8-A162 F61074-V8255-Z000 L_1126 B8831_HD_WB_UN.s2p See file header for port/pin assignment table. S_6001 RoHS-compatible means that products are compatible with the requirements according to Art. 4 substance restrictions of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment "Directive" with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Before using in overmolding environment, please contact your EPCOS sales office. See Inductor pdf-catalog and Data Library for circuit simulation For further information please contact your local EPCOS sales office or visit our webpage at Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 August 18, 2014 Important notes The following applies to all products named in this publication: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at 8 August 18, 2014

PDF Datasheet Preview

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet
Series/type Ordering code:

Date Version:

B8831 B39242B8831P810

August 18, 2014

EPCOS AG Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SAW Components BAW Bluetooth/WLAN Filter

Datasheet

Application
s Low-loss BAW RF single filter for Bluetooth/WLAN with LTE Band 7 / Band 40 / Band 41 coexistence
s Usable passband MHz s Unbalanced to unbalanced operation s Excellent insertion loss s High out of band selectivity s Filter impedance 50

B8831 MHz
s Package size x mm3 s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD s Moisture Sensitivity Level 3 MSL 3

Pin configuration
s1 s4 s 2,3,5,6

Input unbalanced Output unbalanced To be grounded
bottom view
0.45max
side view top view

Please read cautions and warnings and important notes at the end of this document.
2 August 18, 2014

SAW Components BAW Bluetooth/WLAN Filter Datasheet

Characteristics of Filter Temperature range for specification Terminating source impedance Terminating load impedance:

B8831 MHz

T = to +85 ZS = 50 shunt coil nH ZL = 50 shunt coil nH

Characteristics Center frequency

B8831
min. typ. max.

Maximum insertion attenuation - WLAN1 αmax

MHz channel 1

MHz channel 2 1

MHz channel 3-10 1

MHz channel 11 1

MHz channel 12 1

MHz channel 13 1

VSWR Input and Output MHz channel 1-12 MHz channel 13

Attenuation
α MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz
2nd Harmonics CW tone at input, 2442 MHz, 22 dBm
1 Averaged values within each WiFi channel width of MHz 2 Averaged value of linear S-parameter over 5 MHz 3 to

Please read cautions and warnings and important notes at the end of this document.
3 August 18, 2014
Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible

Moldability Matching coils

B8831

B39242B8831P810

C61157-A8-A162

F61074-V8255-Z000

L_1126

B8831_HD_WB_UN.s2p See file header for port/pin assignment table.

S_6001

RoHS-compatible means that products are compatible with the requirements according to Art. 4 substance restrictions of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment "Directive" with due regard to the application of exemptions as per Annex III of the Directive in certain cases.

Before using in overmolding environment, please contact your EPCOS sales office.

See Inductor pdf-catalog
and Data Library for circuit simulation

For further information please contact your local EPCOS sales office or visit our webpage at

Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

Please read cautions and warnings and important notes at the end of this document.
7 August 18, 2014

Important notes

The following applies to all products named in this publication:

Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application.

We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component.

The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at
8 August 18, 2014

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B39242B8831P810 Datasheet file may be downloaded here without warranties.

Datasheet ID: B39242B8831P810 511266