QVL21653

QVL21653 Datasheet

QVL21653

Part	Datasheet
QVL21653	QVL21653 (pdf)

PDF Datasheet Preview
SLOTTED OPTICAL SWITCH PACKAGE DIMENSIONS 2PLCS XX XXX SECTION X-X PIN IDENTIFICATION PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER NOTES Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions unless otherwise specified. QVL21653 SCHEMATIC The QVL21653 consists of an infrared light emitting diode coupled to an NPN silicon phototransistor packaged into an injection molded housing. The housing is designed for wide gap, non contact sensing. • 20 mm wide gap • PC Board mount • apertures • Sensor filter to attenuate visible light 2001 Fairchild Semiconductor Corporation DS300379 11/28/01 1 OF 3 SLOTTED OPTICAL SWITCH QVL21653 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Symbol TOPR TSTG TSOL-I TSOL-F VR PD VCEO VECO IC PD Rating -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec 6 100 20 150 NOTES Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropanol alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing. ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C TEST CONDITIONS IF = 20 mA VR = 5 V IE = 100 µA IC = 1 mA VCE = 10 V BVECO BVCEO ICEO IF = 20 mA, VCE = 5 V IC ON IF = 20 mA, IC = 50 µA VCE SAT Unit °C °C °C °C V mA mW MAX 100

PDF Datasheet Preview

SLOTTED OPTICAL SWITCH

PACKAGE DIMENSIONS
2PLCS

XX XXX

SECTION X-X

PIN IDENTIFICATION

PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER

NOTES Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.

QVL21653

SCHEMATIC

The QVL21653 consists of an infrared light emitting diode coupled to an NPN silicon phototransistor packaged into an injection molded housing. The housing is designed for wide gap, non contact sensing.
• 20 mm wide gap
• PC Board mount
• apertures
• Sensor filter to attenuate visible light
2001 Fairchild Semiconductor Corporation DS300379 11/28/01
1 OF 3

SLOTTED OPTICAL SWITCH

QVL21653

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Symbol TOPR TSTG TSOL-I TSOL-F

VR PD

VCEO

VECO IC PD

Rating -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec
6 100
20 150

NOTES Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropanol alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing.

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

TEST CONDITIONS

IF = 20 mA VR = 5 V

IE = 100 µA

IC = 1 mA VCE = 10 V

BVECO

BVCEO

ICEO

IF = 20 mA, VCE = 5 V

IC ON

IF = 20 mA, IC = 50 µA

VCE SAT

Unit °C °C °C °C

V mA mW

MAX 100

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QVL21653 Datasheet file may be downloaded here without warranties.

Datasheet ID: QVL21653 634552