QVE00034

QVE00034 Datasheet

QVE00034

Part	Datasheet
QVE00034	QVE00034 (pdf)

PDF Datasheet Preview
PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00034 PACKAGE DIMENSIONS PINS 4X SQ. TYP X 45° CHAMFER 2X OPTICAL C.L. 2X TYP PIN #1 ANODE PIN #3 COLLECTOR PIN #2 CATHODE PIN #4 EMITTER NOTES Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions unless otherwise specified. SCHEMATIC The QVE00034 is a slotted optical switch designed for multipurpose non-contact sensing. It consists of a GaAs LED and a silicon photo-transistor packaged into an injection molded housing and facing each other across a mm gap. The housing is featuring locating knobs for accurate mounting. • No contact switching • 8mm wide slot • mm aperture width • Opaque black plastic housing • Locating knobs on housing base for accurate mounting • Transistor Output 2003 Fairchild Semiconductor Corporation Page 1 of 5 4/14/03 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00034 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise Parameter Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD VCEO VECO IC PD Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec 50 6 100 30 20 150 NOTES Derate power dissipation linearly mW/°C above 25°C. RMA is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16" 1.6mm from housing. Units °C °C °C °C mA V mW V mA mW ELECTRICAL/OPTICAL CHARACTERISTICS TA = 25°C unless otherwise PARAMETER TEST CONDITIONS SYMBOL MIN TYP IF = 20 mA VR = 4 V IF = 20 mA

PDF Datasheet Preview

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH

QVE00034

PACKAGE DIMENSIONS

PINS
4X SQ. TYP

X 45° CHAMFER 2X OPTICAL

C.L.
2X TYP

PIN #1 ANODE

PIN #3 COLLECTOR

PIN #2 CATHODE

PIN #4 EMITTER

NOTES Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.

SCHEMATIC

The QVE00034 is a slotted optical switch designed for multipurpose non-contact sensing. It consists of a GaAs LED and a silicon photo-transistor packaged into an injection molded housing and facing each other across a mm gap. The housing is featuring locating knobs for accurate mounting.
• No contact switching
• 8mm wide slot
• mm aperture width
• Opaque black plastic housing
• Locating knobs on housing base for accurate mounting
• Transistor Output
2003 Fairchild Semiconductor Corporation

Page 1 of 5
4/14/03

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH

QVE00034

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise

Parameter

Symbol TOPR TSTG TSOL-I TSOL-F

IF VR PD

VCEO VECO

IC PD

Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec
50 6 100
30 20 150

NOTES

Derate power dissipation linearly mW/°C above 25°C. RMA is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16" 1.6mm from housing.

Units °C °C °C °C
mA V mW

V mA mW

ELECTRICAL/OPTICAL CHARACTERISTICS TA = 25°C unless otherwise

PARAMETER

TEST CONDITIONS

SYMBOL MIN TYP

IF = 20 mA VR = 4 V IF = 20 mA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QVE00034 Datasheet file may be downloaded here without warranties.

Datasheet ID: QVE00034 634547