QEE213

QEE213 Datasheet

QEE213

Part	Datasheet
QEE213	QEE213 (pdf)

PDF Datasheet Preview
PACKAGE DIMENSIONS EMITTER SQ. 2X Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non nominal dimensions unless otherwise specified. PLASTIC INFRARED LIGHT EMITTING DIODE QEE213 SCHEMATIC ANODE CATHODE The QEE213 is a 940nm GaAs LED encapsulated in a medium angle, thin plastic sidelooker package. • Wavelength = 940 nm, GaAs • Package Type Sidelooker • Medium Beam Angle, 50° • Clear Plastic Package • Matched Photosensors QSE213 and QSE243 2001 Fairchild Semiconductor Corporation DS300239 9/18/01 1 OF 4 PLASTIC INFRARED LIGHT EMITTING DIODE QEE213 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified TOPR TSTG TSOL-I TSOL-F IF VR IFP PD Rating -40 to + 100 -40 to + 100 240 for 5 sec 260 for 10 sec 100 5 1 Unit °C °C °C °C mA V A mW ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C Parameter Test Conditions IF = 100 mA IF = 100 mA IF = 100 mA, tp = 20 ms VR = 5 V IF = 100 mA, tp = 20 ms IF = 100 mA tp = 100 µs, T = 10 mS ±25 Units Deg. mW/sr NOTES Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron 1/16” mm minimum from housing. Pulse conditions tp = 100 µs, T = 10 ms. 2 OF 4 9/18/01 DS300239 PLASTIC INFRARED LIGHT EMITTING DIODE QEE213 TYPICAL PERFORMANCE CURVES IF - FORWARD CURRENT mA Fig. 1 Forward Current vs. Forward Voltage 103 IF Pulsed tpw = 100 µs TA =

PDF Datasheet Preview

PACKAGE DIMENSIONS

EMITTER

SQ. 2X

Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non nominal dimensions
unless otherwise specified.

PLASTIC INFRARED LIGHT EMITTING DIODE

QEE213

SCHEMATIC

ANODE CATHODE

The QEE213 is a 940nm GaAs LED encapsulated in a medium angle, thin plastic sidelooker package.
• Wavelength = 940 nm, GaAs
• Package Type Sidelooker
• Medium Beam Angle, 50°
• Clear Plastic Package
• Matched Photosensors QSE213 and QSE243
2001 Fairchild Semiconductor Corporation DS300239 9/18/01
1 OF 4

PLASTIC INFRARED LIGHT EMITTING DIODE

QEE213

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

TOPR TSTG TSOL-I TSOL-F

IF VR IFP PD

Rating -40 to + 100 -40 to + 100 240 for 5 sec 260 for 10 sec
100 5 1

Unit °C °C °C °C mA V A mW

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

Parameter

Test Conditions

IF = 100 mA IF = 100 mA IF = 100 mA, tp = 20 ms

VR = 5 V IF = 100 mA, tp = 20 ms

IF = 100 mA tp = 100 µs, T = 10 mS
±25

Units

Deg.
mW/sr

NOTES

Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron 1/16” mm minimum from housing. Pulse conditions tp = 100 µs, T = 10 ms.
2 OF 4
9/18/01 DS300239

PLASTIC INFRARED LIGHT EMITTING DIODE

QEE213

TYPICAL PERFORMANCE CURVES

IF - FORWARD CURRENT mA

Fig. 1 Forward Current vs. Forward Voltage
103 IF Pulsed tpw = 100 µs TA =

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QEE213 Datasheet file may be downloaded here without warranties.

Datasheet ID: QEE213 634517