MM74HC594M

MM74HC594M Datasheet

MM74HC594 8-Bit Shift Register with Output Registers

Part	Datasheet
MM74HC594M	MM74HC594M (pdf)

Related Parts	Information
MM74HC594MX	MM74HC594MX
MM74HC594N	MM74HC594N

PDF Datasheet Preview
MM74HC594 8-Bit Shift Register with Output Registers MM74HC594 8-Bit Shift Register with Output Registers This high speed shift register utilizes advanced silicon-gate CMOS technology. This device possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Separate clocks and direct overriding clears are provided for both the shift register and the storage register. The shift register has a direct-overriding clear, serial input, and serial output standard pins for cascading. Both the shift register and storage register use positive-edge triggered clocks. If both clocks are connected together, the shift register state will always be one clock pulse ahead of the storage register. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. s Low quiescent current 80 µA maximum s Low input current 1 µA maximum s 8-bit serial-in, parallel-out shift register with storage s Wide operating voltage range 2V to 6V s Cascadable s Shift register has direct clear s Guaranteed shift frequency DC to30 MHz Ordering Code: Order Number Package Number Package Description MM74HC594M M16A 16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow MM74HC594N N16E 16-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Truth Table RCK X SCK SCLR RCLR Function L Storage Register cleared Shift Register cleared Q’H = 0 Shift Register clocked QN = Qn−1, Q0 = SER Contents of Shift Register transferred to output latches 1999 Fairchild Semiconductor Corporation DS010915.prf MM74HC594 Logic Diagram MM74HC594 Absolute Maximum Ratings Note 1 Note 2 Recommended Operation Conditions Supply Voltage VCC DC Input Voltage VIN DC Output Voltage VOUT Clamp Diode Current IIK, IOK DC Output Current, per pin IOUT DC VCC or GND Current, per pin ICC Storage Temperature Range TSTG Power Dissipation PD Note 3 S.O. Package only Lead Temperature TL Soldering 10 seconds to +7.0V to VCC +1.5V to VCC +0.5V ±20 mA ±35 mA ±70 mA −65°C to +150°C 600 mW 500 mW 260°C Min Max Units Supply Voltage VCC DC Input or Output Voltage 0 VCC V VIN, VOUT Operating Temperature Range TA −40 +85 °C Input Rise or Fall Times tr, tf VCC = 2.0V 1000 ns VCC = 4.5V 500 ns VCC = 6.0V

PDF Datasheet Preview

MM74HC594 8-Bit Shift Register with Output Registers

MM74HC594 8-Bit Shift Register with Output Registers

This high speed shift register utilizes advanced silicon-gate CMOS technology. This device possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads.

This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Separate clocks and direct overriding clears are provided for both the shift register and the storage register. The shift register has a direct-overriding clear, serial input, and serial output standard pins for cascading. Both the shift register and storage register use positive-edge triggered clocks. If both clocks are connected together, the shift register state will always be one clock pulse ahead of the storage register.

The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
s Low quiescent current 80 µA maximum s Low input current 1 µA maximum s 8-bit serial-in, parallel-out shift register with storage s Wide operating voltage range 2V to 6V s Cascadable s Shift register has direct clear s Guaranteed shift frequency DC to30 MHz
Ordering Code:

Order Number Package Number

Package Description

MM74HC594M

M16A
16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

MM74HC594N

N16E
16-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

Truth Table

RCK X

SCK SCLR RCLR

Function

L Storage Register cleared

Shift Register cleared

Q’H = 0

Shift Register clocked

QN = Qn−1, Q0 = SER

Contents of Shift

Register transferred
to output latches
1999 Fairchild Semiconductor Corporation DS010915.prf

MM74HC594

Logic Diagram

MM74HC594

Absolute Maximum Ratings Note 1

Note 2

Recommended Operation Conditions

Supply Voltage VCC DC Input Voltage VIN DC Output Voltage VOUT Clamp Diode Current IIK, IOK DC Output Current, per pin IOUT DC VCC or GND Current, per pin ICC Storage Temperature Range TSTG Power Dissipation PD

Note 3

S.O. Package only

Lead Temperature TL Soldering 10 seconds
to +7.0V to VCC +1.5V to VCC +0.5V
±20 mA ±35 mA ±70 mA −65°C to +150°C
600 mW 500 mW
260°C

Min Max Units

Supply Voltage VCC

DC Input or Output Voltage
0 VCC V

VIN, VOUT

Operating Temperature Range TA −40 +85 °C

Input Rise or Fall Times
tr, tf VCC = 2.0V
1000 ns

VCC = 4.5V
500 ns

VCC = 6.0V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MM74HC594M Datasheet file may be downloaded here without warranties.

Datasheet ID: MM74HC594M 634394