KA3846

KA3846 Datasheet


KA3846

Part Datasheet
KA3846 KA3846 KA3846 (pdf)
PDF Datasheet Preview
KA3846

SMPS Controller
• Automatic Feed Forward Compensation
• Programmable Pulse by Pulse Current Limiting
• Automatic Symmetry Correction in Push-Pull

Configuration
• Enhanced Load Response Characteristics
• Parallel Operation Capability for Modulator Power

Systems
• Differential Current Sense Amplifier with Common Mode

Range
• Double Pulse Suppression
• 200mA Totem-Pole Outputs
• ±2% Band gap Reference
• Under-Voltage Lockout
• Soft-Start Capability
• Shutdown Terminal
• 500KHz Operation

The KA3846 control IC provides all of the necessary features to implement fixed frequency, current mode control schemes while maintaining a minimum external parts count. The superior performance of this technique can be measured in improved line regulation, enhanced load response characteristics, and a simpler, easier-to-design control loop. Topological advantages include inherent pulse-by-pulse current limiting capability, automatic symmetry correction for push-pull converters, and the ability to parallel “power module,, while maintaining equal current sharing. Protection circuitry includes built-in-under-voltage lockout and programmable current limit in addition to soft-start capability. A shutdown function is also available which can initiate either a complete shutdown with automatic restart or latch the supply off. Other features include fully latched operation, double pulse suppression, deadtime adjust capability, and ±2% trimmed bandgap reference. The KA3846 features low outputs in the OFF state.
16-DIP

Internal Block Diagram
2000 Fairchild Semiconductor International

KA3846

Absolute Maximum Ratings

Parameter

Value

Unit

Supply Voltage

Collector Supply Voltage

Output Current, Sink of Source Peak

Reference Output Current

IREF

Soft Start Sink Current

ISINK S.S

Sync Output Current

ISYNC

Error Amplifier Output Current

IO E.A

Oscillator Changing Current

ICHG OSC

Power Dissipation TA = 25°C
1000

Operating Temperature

TOPR
0 ~ +70

Storage Temperature

TSTG
-65 ~ +150

Lead Temperature Soldering, 10sec

TLEAD
+300

Electrical Characteristics

VCC=15V, TA=0°C to +70°C, unless otherwise specified
Ordering Information

Product Number KA3846

Package 16 DIP

Operating Temperature 0 ~ + 70°C

KA3846

KA3846

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein:

Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.

A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
7/13/00 0.0m 001 2000 Fairchild Semiconductor International
More datasheets: M85049/1716N05 | M85049/1716N06 | M85049/1716W02 | M85049/1712W03 | M85049/1722N03A | M85049/17-10N03 | M85049/1724W09 | M85049/1710W02 | M85049/17-24N08 | 01500603Z


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived KA3846 Datasheet file may be downloaded here without warranties.

Datasheet ID: KA3846 634113