HUF76445S3S

HUF76445S3S Datasheet

HUF76445P3, HUF76445S3S

Part	Datasheet
HUF76445S3S	HUF76445S3S (pdf)

Related Parts	Information
HUF76445P3	HUF76445P3
HUF76445S3ST	HUF76445S3ST

PDF Datasheet Preview
Data Sheet HUF76445P3, HUF76445S3S December 2001 75A, 60V, Ohm, N-Channel, Logic Level Power MOSFET Packaging JEDEC TO-220AB JEDEC TO-263AB SOURCE DRAIN GATE DRAIN FLANGE DRAIN FLANGE HUF76445P3 GATE SOURCE HUF76445S3S • Ultra Low On-Resistance - rDS ON = VGS = 10V - rDS ON = VGS = 5V • Simulation Models - Temperature Compensated and SABER Electrical Models - Spice and SABER Thermal Impedance Models - • Peak Current vs Pulse Width Curve • UIS Rating Curve • Switching Time vs RGS Curves Ordering Information PACKAGE BRAND HUF76445P3 TO-220AB 76445P HUF76445S3S TO-263AB 76445S NOTE When ordering, use the entire part number. Add the suffix T to obtain the variant in tape and reel, e.g., HUF76445S3ST. Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified HUF76445P3, HUF76445S3S UNITS Drain to Source Voltage Note VDSS Drain to Gate Voltage RGS = Note 1 VDGR Gate to Source Voltage VGS ±16 Drain Current Continuous TC = 25oC, VGS = 5V ID Continuous 11200500oCooCC, r.e2. 2. Pulsed Drain Current IDM Figure 4 Pulsed Avalanche Rating UIS Figures 6, 17, 18 Power Dissipation Derate Above 25oC Operating and Storage Temperature. TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in 1.6mm from Case for 10s. TL Package Body for 10s, See Techbrief TB334. Tpkg NOTES TJ = 25oC to 150oC. 310 -55 to 175 300 260 W/oC CAUTION Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Product reliability information can be found at For severe environments, see our Automotive HUFA series. All Fairchild semiconductor products are manufactured, assembled and tested under ISO9000 and QS9000 quality systems certification. 2001 Fairchild Semiconductor Corporation HUF76445P3, HUF76445S3S Electrical Specifications TC = 25oC, Unless Otherwise Specified PARAMETER TEST CONDITIONS OFF STATE SPECIFICATIONS Drain to Source Breakdown Voltage Zero Gate Voltage Drain Current Gate to Source Leakage Current ON STATE SPECIFICATIONS BVDSS IDSS IGSS ID = 250µA, VGS = 0V Figure 12 ID = 250µA, VGS = 0V , TC = -40oC Figure 12 VDS = 55V, VGS = 0V VDS = 50V, VGS = 0V, TC = 150oC VGS = ±16V Gate to Source Threshold Voltage Drain to Source On Resistance THERMAL SPECIFICATIONS VGS TH rDS ON

PDF Datasheet Preview

Data Sheet

HUF76445P3, HUF76445S3S

December 2001
75A, 60V, Ohm, N-Channel, Logic Level Power MOSFET

Packaging

JEDEC TO-220AB

JEDEC TO-263AB

SOURCE DRAIN GATE

DRAIN FLANGE

DRAIN FLANGE

HUF76445P3

GATE SOURCE

HUF76445S3S
• Ultra Low On-Resistance - rDS ON = VGS = 10V - rDS ON = VGS = 5V
• Simulation Models - Temperature Compensated and SABER Electrical Models - Spice and SABER Thermal Impedance Models -
• Peak Current vs Pulse Width Curve
• UIS Rating Curve
• Switching Time vs RGS Curves
Ordering Information

PACKAGE

BRAND

HUF76445P3

TO-220AB
76445P

HUF76445S3S

TO-263AB
76445S
NOTE When ordering, use the entire part number. Add the suffix T to obtain the variant in tape and reel, e.g., HUF76445S3ST.

Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified

HUF76445P3, HUF76445S3S

UNITS

Drain to Source Voltage Note VDSS

Drain to Gate Voltage RGS = Note 1 VDGR

Gate to Source Voltage VGS
±16

Drain Current

Continuous TC = 25oC, VGS = 5V ID

Continuous
11200500oCooCC, r.e2. 2.

Pulsed Drain Current IDM

Figure 4

Pulsed Avalanche Rating UIS

Figures 6, 17, 18

Power Dissipation Derate Above 25oC

Operating and Storage Temperature. TJ, TSTG Maximum Temperature for Soldering

Leads at 0.063in 1.6mm from Case for 10s. TL Package Body for 10s, See Techbrief TB334. Tpkg NOTES TJ = 25oC to 150oC.
310 -55 to 175
300 260

W/oC

CAUTION Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Product reliability information can be found at For severe environments, see our Automotive HUFA series.

All Fairchild semiconductor products are manufactured, assembled and tested under ISO9000 and QS9000 quality systems certification.
2001 Fairchild Semiconductor Corporation

HUF76445P3, HUF76445S3S

Electrical Specifications TC = 25oC, Unless Otherwise Specified

PARAMETER

TEST CONDITIONS

OFF STATE SPECIFICATIONS

Drain to Source Breakdown Voltage

Zero Gate Voltage Drain Current

Gate to Source Leakage Current ON STATE SPECIFICATIONS

BVDSS IDSS IGSS

ID = 250µA, VGS = 0V Figure 12 ID = 250µA, VGS = 0V , TC = -40oC Figure 12

VDS = 55V, VGS = 0V VDS = 50V, VGS = 0V, TC = 150oC

VGS = ±16V

Gate to Source Threshold Voltage Drain to Source On Resistance

THERMAL SPECIFICATIONS

VGS TH rDS ON

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HUF76445S3S Datasheet file may be downloaded here without warranties.

Datasheet ID: HUF76445S3S 633963