HLMPK600

HLMPK600 Datasheet

HLMP-K600 HLMP-K640 HLMP-K400 HLMP-K401 HLMP-K402

Part	Datasheet
HLMPK600	HLMPK600 (pdf)

Related Parts	Information
HLMPK640	HLMPK640
HLMPK402	HLMPK402
HLMPK401	HLMPK401
HLMPK400	HLMPK400

PDF Datasheet Preview
T-100 3 mm SOLID STATE LAMPS PURE GREEN PURE GREEN SOFT ORANGE SOFT ORANGE SOFT ORANGE HLMP-K600 HLMP-K640 HLMP-K400 HLMP-K401 HLMP-K402 TINTED CLEAR TINTED PACKAGE DIMENSIONS ANODE • Popular T-100 package • Low drive current • Solid state reliability • Wide viewing angle • Choice of pure green or soft orange colors These T-100 LEDs are widely used as general purpose indicators. The pure green lamps is made with a GaP LED on a GaP substrate. The soft orange is made with a GaAsP LED on a GaP substrate. They are encapsulated in epoxy packages and are designed to provide superior light output and a wide viewing angle. ALL DIMENSIONS ARE IN INCHES mm . LEAD SPACING IS MEASURED WHERE THE LEADS EMERGE FROM THE PACKAGE. PROTRUDED RESIN UNDER THE FLANGE IS mm MAX. ABSOLUTE MAXIMUM RATING TA =25°C Parameter Power Dissipation Forward Current Peak Forward Current f=1kHz, DF=10% Lead Soldering Time at 260° C Operating Temperature Storage Temperature GREEN 110 40 200 5 -40 to +100 -40 to +100 ORANGE 110 40 200 5 -40 to +100 -40 to +100 UNITS mW mA sec °C °C 2001 Fairchild Semiconductor Corporation DS300014 2/27/01 1 OF 4 T-100 3 mm SOLID STATE LAMPS ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C Part Number Luminous Intensity mcd HLMP-K600 555 24 5 90 HLMP-K640* HLMP-K400 HLMP-K401 612 40 5 90 HLMP-K402 1,9 612 40 5 90 Condition IF = 10mA IF = 10mA IF = 10mA IF = 10mA IR = 100µA IF = 10mA * HLMP-K640 test condition is IF = 20mA 2 OF 4 2/27/01 DS300014 T-100 3 mm SOLID STATE LAMPS TYPICAL PERFORMANCE CURVES TA =25°C

PDF Datasheet Preview

T-100 3 mm

SOLID STATE LAMPS

PURE GREEN PURE GREEN SOFT ORANGE SOFT ORANGE SOFT ORANGE

HLMP-K600 HLMP-K640 HLMP-K400 HLMP-K401 HLMP-K402

TINTED CLEAR TINTED

PACKAGE DIMENSIONS

ANODE
• Popular T-100 package
• Low drive current
• Solid state reliability
• Wide viewing angle
• Choice of pure green or soft orange colors

These T-100 LEDs are widely used as general purpose indicators. The pure green lamps is made with a GaP LED on a GaP substrate. The soft orange is made with a GaAsP LED on a GaP substrate. They are encapsulated in epoxy packages and are designed to provide superior light output and a wide viewing angle.

ALL DIMENSIONS ARE IN INCHES mm .

LEAD SPACING IS MEASURED WHERE THE LEADS EMERGE FROM THE PACKAGE.

PROTRUDED RESIN UNDER THE FLANGE IS mm MAX.

ABSOLUTE MAXIMUM RATING TA =25°C

Parameter Power Dissipation Forward Current Peak Forward Current f=1kHz, DF=10% Lead Soldering Time at 260° C Operating Temperature Storage Temperature

GREEN 110 40 200 5
-40 to +100 -40 to +100

ORANGE 110 40 200 5
-40 to +100 -40 to +100

UNITS mW mA sec °C °C
2001 Fairchild Semiconductor Corporation DS300014 2/27/01
1 OF 4

T-100 3 mm

SOLID STATE LAMPS

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

Part Number Luminous Intensity mcd

HLMP-K600
555 24 5 90

HLMP-K640* HLMP-K400

HLMP-K401
612 40 5 90

HLMP-K402
1,9 612 40 5 90

Condition IF = 10mA

IF = 10mA

IF = 10mA IF = 10mA IR = 100µA IF = 10mA
* HLMP-K640 test condition is IF = 20mA
2 OF 4
2/27/01 DS300014

T-100 3 mm

SOLID STATE LAMPS

TYPICAL PERFORMANCE CURVES TA =25°C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HLMPK600 Datasheet file may be downloaded here without warranties.

Datasheet ID: HLMPK600 633916