H21A5

H21A5 Datasheet

H21A4 H21A5 H21A6

Part	Datasheet
H21A5	H21A5 (pdf)

Related Parts	Information
H21A6	H21A6
H21A4	H21A4

PDF Datasheet Preview
PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH H21A4 H21A5 H21A6 PACKAGE DIMENSIONS Ø Ø Optical CL PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions unless otherwise specified. SCHEMATIC The H21A series are gallium arsenide infrared emitting diode coupled with a silicon photodarlington in a plastic housing. The packaging system is designed to optimize the mechanical resolution, coupling efficiency, ambient light rejection, cost and reliability. The gap in the housing provides a means of interrupting the signal with an opaque material, switching the output from an “ON” to an “OFF” state. • Opaque housing • Low cost • apertures • High IC ON 2001 Fairchild Semiconductor Corporation DS300291 6/05/01 1 OF 4 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH H21A4 H21A5 H21A6 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Symbol TOPR TSTG TSOL-I TSOL-F VR PD VCEO VECO IC PD Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec 6 100 20 150 Unit °C °C °C °C V mA mW NOTE Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing. ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C All measurements made under pulse conditions PARAMETER TEST CONDITIONS SYMBOL DEVICES INPUT EMITTER Forward Voltage IF = 60 mA IR = 10 µA VR = 3 V IF = 100 µA, Ee = 0 BVECO Collector to Emitter Breakdown Collector to Emitter Leakage COUPLED IC = 1 mA, Ee = 0 VCE = 45 V, Ee = 0 BVCEO ICEO H21A4 IF = 5 mA, VCE = 5 V

PDF Datasheet Preview

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH

H21A4 H21A5 H21A6

PACKAGE DIMENSIONS
Ø Ø

Optical CL

PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER

Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.

SCHEMATIC

The H21A series are gallium arsenide infrared emitting diode coupled with a silicon photodarlington in a plastic housing. The packaging system is designed to optimize the mechanical resolution, coupling efficiency, ambient light rejection, cost and reliability. The gap in the housing provides a means of interrupting the signal with an opaque material, switching the output from an “ON” to an “OFF” state.
• Opaque housing
• Low cost
• apertures
• High IC ON
2001 Fairchild Semiconductor Corporation DS300291 6/05/01
1 OF 4

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH

H21A4 H21A5 H21A6

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Symbol TOPR TSTG TSOL-I TSOL-F

VR PD

VCEO

VECO IC PD

Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec
6 100
20 150

Unit °C °C °C °C

V mA mW

NOTE Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing.

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C All measurements made under pulse conditions

PARAMETER

TEST CONDITIONS

SYMBOL DEVICES

INPUT EMITTER Forward Voltage

IF = 60 mA

IR = 10 µA VR = 3 V

IF = 100 µA, Ee = 0

BVECO

Collector to Emitter Breakdown Collector to Emitter Leakage COUPLED

IC = 1 mA, Ee = 0 VCE = 45 V, Ee = 0

BVCEO

ICEO

H21A4

IF = 5 mA, VCE = 5 V

More datasheets: V23826-K305-C63D3 | V23826-K305-C313 | V23826-K305-C353 | V23826-K305-C363 | 5V50017DCG | DDMMV24X7SN | MIKROE-2769 | DA15PH | H21A6 | H21A4

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived H21A5 Datasheet file may be downloaded here without warranties.

Datasheet ID: H21A5 633875