ADP3166*
Part | Datasheet |
---|---|
![]() |
ADP3166JRU-REEL (pdf) |
Related Parts | Information |
---|---|
![]() |
ADP3166JRU-REEL7 |
![]() |
ADP3166JRUZ-REEL |
PDF Datasheet Preview |
---|
5-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller ADP3166* FEATURES Selectable 2-, 3- or 4-Phase Operation at up to 1 MHz per Phase Differential Sensing Error ±1% over Temperature Logic-Level PWM Outputs for Interface to External High Power Drivers Active Current Balancing between All Output Phases Built-in Power Good Blanking Supports On-the-Fly VID Code Changes 5-Bit Digitally Programmable V to V Output Short-Circuit Protection with Programmable Latch-Off Delay Overvoltage Protection Crowbar Logic Output APPLICATIONS Desktop PC Power Supplies Next-Generation AMD Processors VRM Modules GENERAL DESCRIPTION The ADP3166 is a highly efficient, multiphase, synchronous buck switching regulator controller optimized for converting a 12 V main supply into the core supply voltage required by high performance AMD processors. It uses an internal 5-bit DAC to read a voltage identification VID code directly from the processor, which is used to set the output voltage between V and V. The ADP3166 also uses a multimode PWM architecture to drive the logic-level outputs at a programmable switching frequency that can be optimized for VRM size and efficiency. The phase relationship of the output signals can be programmed to provide 2-, 3-, or 4-phase operation, allowing for the construction of up to four complementary buck switching stages. The ADP3166 includes programmable no-load offset and slope functions to adjust the output voltage as a function of the load current so that it is always optimally positioned for a system transient. The ADP3166 also provides accurate and reliable short-circuit protection, adjustable current limiting, and a delayed power good output that accommodates on-the-fly output voltage changes requested by the CPU. ADP3166 is specified over the commercial temperature range of 0°C to 85°C and is available in a 28-lead TSSOP package. FUNCTIONAL BLOCK DIAGRAM VCC 28 ADP3166 EN 11 UVLO SHUTDOWN AND BIAS GND 19 CROWBAR 6 CSREF + 2.1V DAC + 300mV + CSREF DAC 300mV PWRGD 10 DELAY ILIMIT 15 EN RAMPADJ RT OSCILLATOR CURRENT BALANCING CIRCUIT SET EN RESET 27 PWM1 + CMP RESET 2-, 3- , 4-PHASE DRIVER LOGIC RESET 26 PWM2 25 PWM3 RESET 24 PWM4 CROWBAR CURRENT LIMIT ORDERING GUIDE Temperature Range 0°C to 85°C 0°C to 85°C Package Options Quantity per Reel RU-28 TSSOP-28 1000 RU-28 TSSOP-28 2500 SUPPLY CURRENT mA MASTER CLOCK FREQUENCY MHz TA = 4-PHASE OPERATION 0 MASTER CLOCK FREQUENCY MHz TPC Supply Current vs. Master Clock Frequency RT VALUE TPC Master Clock Frequency vs. RT CAUTION ESD electrostatic discharge sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the ADP3166 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. ADP3166 1 VID4 VCC 28 2 VID3 PWM1 27 5-BIT CODE 3 VID2 4 VID1 PWM2 26 PWM3 25 5 VID0 PWM4 24 6 CROWBAR SW1 23 7 FBRTN SW2 22 SW3 21 9 COMP 10 PWRGD SW4 20 GND 19 1.25V 11 EN 12 DELAY 4.7nF 13 RT CSCOMP 18 CSSUM 17 CSREF 16 14 RAMPADJ ILIMIT 15 12V 100nF 100nF Test Circuit Closed-Loop Output Voltage Accuracy ADP3166 VCC 28 CSCOMP 18 100nF |
More datasheets: 74LVTH652MTC | FIT0436 | ADP-VD-1020-500A0 | ADP-WP-7530-ER6AY | ADP-2D-012A-53000 | ADP-2D-062A-12000 | ADP-MR-2081-07000 | ADP-MR-2001-07000 | AS3677-ZWLT-500 | AS3677-ZWLT |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADP3166JRU-REEL Datasheet file may be downloaded here without warranties.