FST34X245QSPX

FST34X245QSPX Datasheet


FST34X245 32-Bit Bus Switch

Part Datasheet
FST34X245QSPX FST34X245QSPX FST34X245QSPX (pdf)
PDF Datasheet Preview
FST34X245 32-Bit Bus Switch

FST34X245 32-Bit Bus Switch

The Fairchild Switch FST34X245 provides 32-bits of high speed CMOS TTL-compatible bus switching in a standard flow-through mode. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

The device is organized as a 32-bit switch. When OE is LOW, the switch is ON and Port A is connected to Port B. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports.
s switch connection between two ports s Minimal propagation delay through the switch s Low lCC s Zero bounce in flow-through mode s Control inputs compatible with TTL level s 32-bit version of FST3245 s Packaged in 20.5mm 80-lead package
Ordering Code:

Order Number Package Number

Package Description

FST34X245QSP

MQA80A
80-Lead, QVSOP, JEDEC MO-154, Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Diagram
2001 Fairchild Semiconductor Corporation DS500554

FST34X245

Connection Diagram

Pin Descriptions

Pin Name OEn An Bn NC

Function Table

Input OEn L H

Description Bus Switch Enable

Bus A Bus B No Connect

Function Connect Disconnect

FST34X245

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Switch Voltage VS DC Input Voltage VIN Note 2 DC Input Diode Current lIK VIN < 0V DC Output IOUT Sink Current DC VCC/GND Current ICC/IGND Storage Temperature Range TSTG
−0.5V to +7.0V −0.5V to +7.0V −0.5V to +7.0V
−50 mA 128 mA +/− 100 mA −65°C to +150 °C

Recommended Operating Conditions Note 3

Power Supply Operating VCC Input Voltage VIN Output Voltage VOUT Input Rise and Fall Time tr, tf

Switch Control Input
4.0V to 5.5V 0V to 5.5V 0V to 5.5V
0 ns/V to 5 ns/V

Switch I/O
0 ns/V to DC

Free Air Operating Temperature TA −40 °C to +85 °C

Note 1 The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed.

Note 3 Unused control inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Parameter

VCC V

TA = −40 °C to +85 °C

Units

Note 4

Conditions

Clamp Diode Voltage

HIGH Level Input Voltage

LOW Level Input Voltage

Input Leakage Current

OFF-STATE Leakage Current

Switch On Resistance
More datasheets: B25832C4506K9 | B25832C4605K9 | B25832C4805K9 | B25832C6106K9 | B25832C6126K9 | B25832C6156K9 | B25832C6186K9 | B25832C6206K9 | B25832C4336K9 | B25832F4685K1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FST34X245QSPX Datasheet file may be downloaded here without warranties.

Datasheet ID: FST34X245QSPX 515551