FPAB50PH60

FPAB50PH60 Datasheet

FPAB50PH60

Part	Datasheet
FPAB50PH60	FPAB50PH60 (pdf)

PDF Datasheet Preview
FPAB50PH60 January, 2006 FPAB50PH60 Smart Power Module for Front-End Rectifier FPAB50PH60 is an advanced smart power module of PFC Power Factor Correction that Fairchild has newly developed and designed mainly targeting mid-power application especially for an air conditioners. It combines optimized circuit protection and drive IC matched to high frequency switching IGBTs. System reliability is futher enhanced by the integrated under-voltage lock-out and over-current protection function. • Low thermal resistance due to AlN-DBC substrate • 600V-50A 2-phase IGBT PWM semi-converter including a drive IC for IGBT gate driving and protection • Typical switching frequency of 20kHz • Isolation rating of 2500Vrms/min. • AC 180V ~ 264V single-phase front-end rectifier Top View 44mm 26.8mm Bottom View 2006 Fairchild Semiconductor Corporation Fig. January, 2006 FPAB50PH60 Integrated Power Functions • PFC converter for single-phase AC/DC power conversion Please refer to Fig. 3 Integrated Drive, Protection and System Control Functions • For IGBTs Gate drive circuit, Overcurrent circuit protection OC , Control supply circuit under-voltage UV protection • Fault signaling Corresponding to a UV fault • Input interface 5V CMOS/LSTTL compatible, Schmitt trigger input Pin Configuration 1 VCC L 2 COM 3 NC 4 IN R 5 IN S 6 VFO 7 CFOD 8 CSC 9 NC 10 NC 11 NC 12 NC 13 NC 14 NC 15 NC 16 NC 17 NC 18 NC 19 RTH 20 VTH Top View 21 VAC 22 NC 23 NC 24 N 25 R Case Temperature TC Detecting Point DBC Substrate 27 PR Fig. 2006 Fairchild Semiconductor Corporation January, 2006 FPAB50PH60 Pin Descriptions Pin Number 1 2 4 5 6 7 8 19 20 21 24 25 26 27

PDF Datasheet Preview

FPAB50PH60

January, 2006

FPAB50PH60

Smart Power Module for Front-End Rectifier

FPAB50PH60 is an advanced smart power module of PFC Power Factor Correction that Fairchild has newly developed and designed mainly targeting mid-power application especially for an air conditioners. It combines optimized circuit protection and drive IC matched to high frequency switching IGBTs. System reliability is futher enhanced by the integrated under-voltage lock-out and over-current protection function.
• Low thermal resistance due to AlN-DBC substrate
• 600V-50A 2-phase IGBT PWM semi-converter including
a drive IC for IGBT gate driving and protection
• Typical switching frequency of 20kHz
• Isolation rating of 2500Vrms/min.
• AC 180V ~ 264V single-phase front-end rectifier

Top View 44mm
26.8mm

Bottom View
2006 Fairchild Semiconductor Corporation

Fig.

January, 2006

FPAB50PH60

Integrated Power Functions
• PFC converter for single-phase AC/DC power conversion Please refer to Fig. 3

Integrated Drive, Protection and System Control Functions
• For IGBTs Gate drive circuit, Overcurrent circuit protection OC , Control supply circuit under-voltage UV protection
• Fault signaling Corresponding to a UV fault
• Input interface 5V CMOS/LSTTL compatible, Schmitt trigger input

Pin Configuration
1 VCC L 2 COM 3 NC 4 IN R 5 IN S 6 VFO 7 CFOD 8 CSC
9 NC 10 NC 11 NC
12 NC 13 NC 14 NC
15 NC
16 NC
17 NC
18 NC
19 RTH
20 VTH

Top View
21 VAC 22 NC 23 NC
24 N 25 R

Case Temperature TC Detecting Point

DBC Substrate
27 PR

Fig.
2006 Fairchild Semiconductor Corporation

January, 2006

FPAB50PH60

Pin Descriptions

Pin Number 1 2 4 5 6 7 8 19 20 21 24 25 26 27

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FPAB50PH60 Datasheet file may be downloaded here without warranties.

Datasheet ID: FPAB50PH60 514975