FOD0738R1

FOD0738R1 Datasheet

FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler

Part	Datasheet
FOD0738R1	FOD0738R1 (pdf)

Related Parts	Information
FOD0708R1	FOD0708R1

PDF Datasheet Preview
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler April 2006 FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler • +5 V CMOS compatibility • 15 ns typical pulse width distortion • 30 ns max. pulse width distortion • 40 ns max. propagation delay skew • High speed 15 MBd • 60 ns max. propagation delay • 10 kV/µs minimum common mode rejection • to 100°C temperature range • UL approved #E90700 • Line receivers • Pulse transformer replacement • Output interface to CMOS-LSTTL-TTL • Wide bandwidth analog coupling The FOD0708 and FOD0738 optocouplers consist of an AlGaAs LED optically coupled to a high speed transimpedance and voltage comparator. These optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The devices are housed in a compact 8-pin SOIC package for optimum mounting density. Package Dimensions SEATING PLANE Pin 1 Lead Coplanarity MAX NC 1 ANODE 2 CATHODE 3 FOD0708 8 VDD 7 NC 6 VO 5 GND ANODE 1 CATHODE 1 2 CATHODE 2 3 ANODE 2 4 FOD0738 8 VDD 7 VO 1 6 VO 2 5 GND TRUTH TABLE OFF ON VO OUTPUT H L Note A 0.1µF bypass capacitor must be connected between pins 5 and 2005 Fairchild Semiconductor Corporation FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Absolute Maximum Ratings TA = 25°C unless otherwise noted Parameter Min. Max. Units Storage Temperature Ambient Operating Temperature Supply Voltages Output Voltage Average Output Current Average Forward Input Current Lead Solder Temperature +125 +100 Volts VDD + 2 Volts mA 260°C for 10 sec., mm below seating plane Ordering Information Option No R1 R2 Order Entry FOD0708 FOD0708R1 FOD0708R2 Marking Information Shipped in tubes 50 units per tube Tape and Reel 500 units per reel Tape and Reel 2500 units per reel 0708 2 V X YY S 1 Fairchild logo 2 Device number 3 VDE mark Note Only appears on parts ordered with VDE option See order entry table 4 One digit year code, e.g., ‘5’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler Carrier Tape ± MAX ± ± ± User Direction of Feed MIN ± ± ± 300 280 260 240 220 200 180 160 °C 140 120 100 80 60 40 20 260°C >245°C = 42 Sec Time above 183°C = 90 Sec 1.822°C/Sec Ramp up rate 33 Sec 60 Time s FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx ActiveArray FASTr Bottomless FPS Build it Now FRFET CoolFET GlobalOptoisolator CROSSVOLT GTO DOME HiSeC EcoSPARK I2C E2CMOS i-Lo

PDF Datasheet Preview

FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler

April 2006

FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
• +5 V CMOS compatibility
• 15 ns typical pulse width distortion
• 30 ns max. pulse width distortion
• 40 ns max. propagation delay skew
• High speed 15 MBd
• 60 ns max. propagation delay
• 10 kV/µs minimum common mode rejection
• to 100°C temperature range
• UL approved #E90700
• Line receivers
• Pulse transformer replacement
• Output interface to CMOS-LSTTL-TTL
• Wide bandwidth analog coupling

The FOD0708 and FOD0738 optocouplers consist of an AlGaAs LED optically coupled to a high speed transimpedance and voltage comparator. These optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The devices are housed in a compact 8-pin SOIC package for optimum mounting density.

Package Dimensions

SEATING PLANE

Pin 1

Lead Coplanarity MAX

NC 1 ANODE 2 CATHODE 3

FOD0708
8 VDD 7 NC 6 VO 5 GND

ANODE 1 CATHODE 1 2 CATHODE 2 3

ANODE 2 4

FOD0738
8 VDD 7 VO 1 6 VO 2 5 GND

TRUTH TABLE

OFF ON

VO OUTPUT H L

Note A 0.1µF bypass capacitor must be connected between pins 5 and
2005 Fairchild Semiconductor Corporation

FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler

Absolute Maximum Ratings TA = 25°C unless otherwise noted

Parameter

Min.

Max.

Units

Storage Temperature

Ambient Operating Temperature

Supply Voltages

Output Voltage

Average Output Current

Average Forward Input Current

Lead Solder Temperature
+125
+100

Volts

VDD + 2

Volts mA
260°C for 10 sec., mm below seating plane
Ordering Information

Option

No R1 R2

Order Entry

FOD0708 FOD0708R1 FOD0708R2

Marking Information

Shipped in tubes 50 units per tube Tape and Reel 500 units per reel Tape and Reel 2500 units per reel
0708 2

V X YY S
1 Fairchild logo 2 Device number 3 VDE mark Note Only appears on parts ordered with VDE option

See order entry table 4 One digit year code, e.g., ‘5’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code

FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler

Carrier Tape
± MAX
± ± ±

User Direction of Feed

MIN ±
± ±
300 280 260 240 220 200 180 160 °C 140 120 100
80 60 40 20
260°C
>245°C = 42 Sec

Time above 183°C = 90 Sec
1.822°C/Sec Ramp up rate
33 Sec 60

Time s

FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx

ActiveArray FASTr

Bottomless FPS

Build it Now FRFET

CoolFET

GlobalOptoisolator

CROSSVOLT GTO

DOME

HiSeC

EcoSPARK I2C

E2CMOS
i-Lo

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FOD0738R1 Datasheet file may be downloaded here without warranties.

Datasheet ID: FOD0738R1 514955