FIN1047M

FIN1047M Datasheet

FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver

Part	Datasheet
FIN1047M	FIN1047M (pdf)

Related Parts	Information
FIN1047MTC	FIN1047MTC

PDF Datasheet Preview
FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver This quad driver is designed for high speed interconnects utilizing Low Voltage Differential Signaling LVDS technology. The driver translates LVTTL signal levels to LVDS levels with a typical differential output swing of 350mV which provides low EMI at ultra low power dissipation even at high frequencies. This device is ideal for high speed transfer of clock and data. The FIN1047 can be paired with its companion receiver, the FIN1048, or any other LVDS receiver. s Greater than 400Mbs data rate s Flow-through pinout simplifies PCB layout s 3.3V power supply operation s ns maximum differential pulse skew s ns maximum propagation delay s Low power dissipation s Power-Off protection s Meets or exceeds the TIA/EIA-644 LVDS standard s Pin compatible with equivalent RS-422 and LVPECL devices s 16-Lead SOIC and TSSOP packages save space Ordering Code: Order Number Package Number Package Description FIN1047M M16A 16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow FIN1047MTC MTC16 16-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Pin Descriptions Truth Table Pin Name DIN1, DIN2, DIN3, DIN4 LVTTL Data Inputs DOUT1+, DOUT2+, DOUT3+, DOUT4+ Non-Inverting Driver Outputs DOUT1−, DOUT2−, DOUT3−, DOUT4− Inverting Driver Outputs Driver Enable Pin VCC GND Inverting Driver Enable Pin Power Supply Ground Inputs L or OPEN L or OPEN L or OPEN L or OPEN H = HIGH Logic Level L = LOW Logic Level X = Don’t Care Z = High Impedance Outputs DOUT+ H L Z DOUT− L H Z 2003 Fairchild Semiconductor Corporation DS500589 FIN1047 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Voltage VIN DC Input Voltage VOUT Driver Short Circuit Current IOSD Storage Temperature Range TSTG Max Junction Temperature TJ Lead Temperature TL Soldering, 10 seconds ESD Human Body Model ESD Machine Model −0.5V to +4.6V −0.5V to +6V −0.5V to 4.6V Continuous −65°C to +150°C 150°C 260°C 9000V 1200V Recommended Operating Conditions Supply Voltage VCC Input Voltage VIN Operating Temperature TA 3.0V to 3.6V 0 to VCC −40°C to +85°C Note 1 The “Absolute Maximum Ratings” are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specification. DC Electrical Characteristics

PDF Datasheet Preview

FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver

FIN1047 3.3V LVDS 4-Bit Flow-Through High Speed Differential Driver

This quad driver is designed for high speed interconnects utilizing Low Voltage Differential Signaling LVDS technology. The driver translates LVTTL signal levels to LVDS levels with a typical differential output swing of 350mV which provides low EMI at ultra low power dissipation even at high frequencies. This device is ideal for high speed transfer of clock and data.

The FIN1047 can be paired with its companion receiver, the FIN1048, or any other LVDS receiver.
s Greater than 400Mbs data rate s Flow-through pinout simplifies PCB layout s 3.3V power supply operation s ns maximum differential pulse skew s ns maximum propagation delay s Low power dissipation s Power-Off protection s Meets or exceeds the TIA/EIA-644 LVDS standard s Pin compatible with equivalent RS-422 and LVPECL
devices s 16-Lead SOIC and TSSOP packages save space
Ordering Code:

Order Number Package Number

Package Description

FIN1047M

M16A
16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

FIN1047MTC

MTC16
16-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

Pin Descriptions

Truth Table

Pin Name

DIN1, DIN2, DIN3, DIN4

LVTTL Data Inputs

DOUT1+, DOUT2+, DOUT3+, DOUT4+ Non-Inverting Driver Outputs

DOUT1−, DOUT2−, DOUT3−, DOUT4− Inverting Driver Outputs

Driver Enable Pin

VCC GND

Inverting Driver Enable Pin

Power Supply

Ground

Inputs

L or OPEN

L or OPEN

L or OPEN

L or OPEN

H = HIGH Logic Level L = LOW Logic Level

X = Don’t Care

Z = High Impedance

Outputs

DOUT+ H L Z

DOUT− L H Z
2003 Fairchild Semiconductor Corporation DS500589

FIN1047

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Input Voltage VIN DC Input Voltage VOUT Driver Short Circuit Current IOSD Storage Temperature Range TSTG Max Junction Temperature TJ Lead Temperature TL

Soldering, 10 seconds

ESD Human Body Model

ESD Machine Model
−0.5V to +4.6V −0.5V to +6V −0.5V to 4.6V Continuous
−65°C to +150°C 150°C 260°C
9000V 1200V

Recommended Operating Conditions

Supply Voltage VCC Input Voltage VIN Operating Temperature TA
3.0V to 3.6V 0 to VCC
−40°C to +85°C

Note 1 The “Absolute Maximum Ratings” are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specification.

DC Electrical Characteristics

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FIN1047M Datasheet file may be downloaded here without warranties.

Datasheet ID: FIN1047M 514670