FAN5336UMPX

FAN5336UMPX Datasheet

FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch

Part	Datasheet
FAN5336UMPX	FAN5336UMPX (pdf)

Related Parts	Information
FAN5336MPX	FAN5336MPX

PDF Datasheet Preview
FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch April 2009 FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch • 1.5MHz Switching Frequency • Low Noise • Adjustable Output Voltage • Up to 1.5A Peak Switch Current • Low Shutdown Current <1µA • Cycle-by-Cycle Current Limit • Over-Voltage Protection at the Feedback Pin • Fixed-Frequency PWM Operation • Soft-Start Capability • Internal Compensation • Thermal Shutdown • Excellent Load Regulation • Low Ripple • 6-Lead 3x3mm MLP • Portable Displays • Mobile Phone / Smart Phone LED Backlights • Display Bias • PDA, DVD, Camcorder Backlights • Pager and Cordless Phone Displays • Portable Medical Diagnostic Equipment • Remote Controls • MP3 or PMP or DSC Players • Serial Flash LED Drivers Application Diagram VIN CIN 10µF L1 6.8µH 2 GND The FAN5336 is a high-efficiency, low-noise, fixed-frequency PWM, current-mode, DC-DC boost regulator. It is designed for small LCD bias supply and white LED backlight supply applications. Depending on the application, a FAN5336 regulator can output up to 33V at up to 50mA output current. With output voltage up to 21V, the output current can be up to 100mA. FAN5336 can be used for power conversion as low as 9V output voltage. A current-mode control loop has a fast transient response that provides excellent load regulation within of output voltage. The FAN5336 switches at fixed 1.5MHz frequency, allowing the use of small, low-cost external components. Constant frequency switching results in low input noise and small output capacitors. FAN5336 provides cycle-by-cycle current limiting up to 1.5A peak current. The FAN5336 may be used to drive a serial flash LED with up to 100mA current at 21V for a maximum of 400ms on-time and 10% duty cycle. A low-EMI mode reduces interference and radiated electromagnetic energy caused by the ringing of the inductor. Additional features include thermal shutdown, over-voltage protection, cycle-by-cycle current limit, low ripple, and soft-start support. The device is available in a 3x3mm 6-lead MLP, 0.8mm thickness package. D1 R1 CF 180pF VOUT COUT 4.7µF 3 SHDN Figure Typical Application Diagram FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch Ordering Information Part Number FAN5336MPX FAN5336UMPX Package 6-Lead 3x3mm MLP 6-Lead 3x3mm UMLP Temperature Range -40°C to +85°C -40°C to +85°C Eco Status Green Packing Method Tape and Reel Tape and Reel For Fairchild’s definition of “green” Eco Status, please visit: Pin Assignments VIN 1 GND 2 SHDN 3 6 SW P1 5 NC Figure 6-Lead, 3x3mm MLP Top View Pin Descriptions Pin # P1 1 2 3 4 5 6 Name GND VIN GND SHDN FB NC SW Description Analog and Power Ground. P1 must be soldered to the PCB ground. Input Voltage Pin. Ground. Shutdown Control Pin. Logic HIGH enables, logic LOW disables the device. Feedback Pin. Feedback node that connects to an external voltage divider. No Connect. Switching Node. 2004 Fairchild Semiconductor Corporation FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbols VIN TL TJ TSTG ΘJA ESD Parameter VIN to GND FB, SHDN to GND SW to GND Lead Soldering Temperature 10 seconds Junction Temperature Storage Temperature Thermal Resistance Electrostatic Discharge Protection Level 1 HBM CDM Min. -55 2 1 Max. VIN + 35 300 150 265 Unit V °C °C °C °C/W Note Using EIA/JESD22A114B Human Body Model and EIA/JESD22C101-A Charge Device Model . Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbols Parameter Min. Typ. Max. Unit VIN VOUT TA COUT Input Voltage Output Voltage Ambient Operating Temperature Output Capacitance

PDF Datasheet Preview

FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch

April 2009

FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch
• 1.5MHz Switching Frequency
• Low Noise
• Adjustable Output Voltage
• Up to 1.5A Peak Switch Current
• Low Shutdown Current <1µA
• Cycle-by-Cycle Current Limit
• Over-Voltage Protection at the Feedback Pin
• Fixed-Frequency PWM Operation
• Soft-Start Capability
• Internal Compensation
• Thermal Shutdown
• Excellent Load Regulation
• Low Ripple
• 6-Lead 3x3mm MLP
• Portable Displays
• Mobile Phone / Smart Phone LED Backlights
• Display Bias
• PDA, DVD, Camcorder Backlights
• Pager and Cordless Phone Displays
• Portable Medical Diagnostic Equipment
• Remote Controls
• MP3 or PMP or DSC Players
• Serial Flash LED Drivers

Application Diagram

VIN CIN
10µF

L1 6.8µH
2 GND

The FAN5336 is a high-efficiency, low-noise, fixed-frequency PWM, current-mode, DC-DC boost regulator. It is designed for small LCD bias supply and white LED backlight supply applications. Depending on the application, a FAN5336 regulator can output up to 33V at up to 50mA output current. With output voltage up to 21V, the output current can be up to 100mA. FAN5336 can be used for power conversion as low as 9V output voltage.

A current-mode control loop has a fast transient response that provides excellent load regulation within of output voltage. The FAN5336 switches at fixed 1.5MHz frequency, allowing the use of small, low-cost external components. Constant frequency switching results in low input noise and small output capacitors. FAN5336 provides cycle-by-cycle current limiting up to 1.5A peak current.

The FAN5336 may be used to drive a serial flash LED with up to 100mA current at 21V for a maximum of 400ms on-time and 10% duty cycle.

A low-EMI mode reduces interference and radiated electromagnetic energy caused by the ringing of the inductor.

Additional features include thermal shutdown, over-voltage protection, cycle-by-cycle current limit, low ripple, and soft-start support.

The device is available in a 3x3mm 6-lead MLP, 0.8mm thickness package.

D1 R1

CF 180pF

VOUT COUT
4.7µF
3 SHDN

Figure Typical Application Diagram

FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch
Ordering Information

Part Number FAN5336MPX FAN5336UMPX

Package 6-Lead 3x3mm MLP 6-Lead 3x3mm UMLP

Temperature Range -40°C to +85°C -40°C to +85°C

Eco Status Green

Packing Method Tape and Reel Tape and Reel

For Fairchild’s definition of “green” Eco Status, please visit:

Pin Assignments

VIN 1 GND 2 SHDN 3
6 SW P1 5 NC

Figure 6-Lead, 3x3mm MLP Top View

Pin Descriptions

Pin # P1 1 2 3 4 5 6

Name GND VIN GND SHDN FB NC SW

Description Analog and Power Ground. P1 must be soldered to the PCB ground. Input Voltage Pin. Ground. Shutdown Control Pin. Logic HIGH enables, logic LOW disables the device. Feedback Pin. Feedback node that connects to an external voltage divider. No Connect. Switching Node.
2004 Fairchild Semiconductor Corporation

FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.

Symbols VIN

TL TJ TSTG ΘJA ESD

Parameter VIN to GND FB, SHDN to GND SW to GND Lead Soldering Temperature 10 seconds Junction Temperature Storage Temperature Thermal Resistance

Electrostatic Discharge Protection Level 1

HBM CDM

Min.
-55 2 1

Max. VIN + 35 300 150 265

Unit V °C °C °C
°C/W

Note Using EIA/JESD22A114B Human Body Model and EIA/JESD22C101-A Charge Device Model .

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings.

Symbols

Parameter

Min.

Typ.

Max.

Unit

VIN VOUT

TA COUT

Input Voltage Output Voltage Ambient Operating Temperature Output Capacitance

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FAN5336UMPX Datasheet file may be downloaded here without warranties.

Datasheet ID: FAN5336UMPX 513935