DM74LS132N

DM74LS132N Datasheet

DM74LS132 Quad 2-Input NAND Gate with Schmitt Trigger Input

Part	Datasheet
DM74LS132N	DM74LS132N (pdf)

PDF Datasheet Preview
DM74LS132 Quad 2-Input NAND Gate with Schmitt Trigger Input DM74LS132 Quad 2-Input NAND Gate with Schmitt Trigger Input This device contains four independent gates each of which performs the logic NAND function. Each input has hysteresis which increases the noise immunity and transforms a slowly changing input signal to a fast changing, jitter free output. Ordering Code: Order Number Package Number Package Description DM74LS132M M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-120, Narrow DM74LS132SJ M14D 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide DM74LS132N N14A 14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y = AB Inputs H = HIGH Logic Level L = LOW Logic Level Output Y H L 2000 Fairchild Semiconductor Corporation DS006389 DM74LS132 Absolute Maximum Ratings Note 1 Supply Voltage Input Voltage Operating Free Air Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the “Electrical Characteristics” table are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Recommended Operating Conditions Symbol VCC VT+ VT− HYS IOH IOL TA Parameter Supply Voltage Positive-Going Input Threshold Voltage Note 2 Negative-Going Input Threshold Voltage Note 2 Input Hysteresis Note 2 HIGH Level Output Current LOW Level Output Current Free Air Operating Temperature Electrical Characteristics over recommended operating free air temperature range unless otherwise noted Parameter Conditions Input Clamp Voltage VCC = Min, II = −18 mA HIGH Level Output Voltage VCC = Min, IOH = Max, VI = VT− Min LOW Level VCC = Min, IOL = Max, Output Voltage VI = VT+ Max IOL = 4 mA, VCC = Min Input Current at Positive-Going Threshold VCC = 5V, VI = VT+ IT− Input Current at Negative-Going Threshold VCC = 5V, VI = VT− Input Current Max Input Voltage VCC = Max, VI = 7V

PDF Datasheet Preview

DM74LS132 Quad 2-Input NAND Gate with Schmitt Trigger Input

DM74LS132 Quad 2-Input NAND Gate with Schmitt Trigger Input

This device contains four independent gates each of which performs the logic NAND function. Each input has hysteresis which increases the noise immunity and transforms a slowly changing input signal to a fast changing, jitter free output.
Ordering Code:

Order Number Package Number

Package Description

DM74LS132M

M14A
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-120, Narrow

DM74LS132SJ

M14D
14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide

DM74LS132N

N14A
14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

Function Table

Y = AB

Inputs

H = HIGH Logic Level L = LOW Logic Level

Output Y H L
2000 Fairchild Semiconductor Corporation DS006389

DM74LS132

Absolute Maximum Ratings Note 1

Supply Voltage

Input Voltage

Operating Free Air Temperature Range 0°C to +70°C

Storage Temperature Range
−65°C to +150°C

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the “Electrical Characteristics” table are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Recommended Operating Conditions

Symbol VCC VT+

VT−

HYS IOH IOL TA

Parameter Supply Voltage Positive-Going Input Threshold Voltage Note 2 Negative-Going Input Threshold Voltage Note 2 Input Hysteresis Note 2 HIGH Level Output Current LOW Level Output Current Free Air Operating Temperature

Electrical Characteristics
over recommended operating free air temperature range unless otherwise noted

Parameter

Conditions

Input Clamp Voltage

VCC = Min, II = −18 mA

HIGH Level

Output Voltage

VCC = Min, IOH = Max,

VI = VT− Min

LOW Level

VCC = Min, IOL = Max,

Output Voltage

VI = VT+ Max

IOL = 4 mA, VCC = Min

Input Current at Positive-Going Threshold VCC = 5V, VI = VT+

IT−

Input Current at Negative-Going Threshold VCC = 5V, VI = VT−

Input Current Max Input Voltage

VCC = Max, VI = 7V

More datasheets: FIT0292-Y | M3191 SL002 | M3191 SL001 | M3191 SL005 | 22-23B/R6GTBTW-C01/2C | M213402 SL002 | M213402 SL005 | M213402 SL001 | CT-1040 | TSWB3NC LFS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DM74LS132N Datasheet file may be downloaded here without warranties.

Datasheet ID: DM74LS132N 513761