DM74ALS576A Octal D-Type Edge-Triggered Flip-Flop with 3-STATE Outputs
Part | Datasheet |
---|---|
![]() |
DM74ALS576AWM (pdf) |
Related Parts | Information |
---|---|
![]() |
DM74ALS576SJX |
![]() |
DM74ALS576AN |
![]() |
DM74ALS576AWMX |
PDF Datasheet Preview |
---|
DM74ALS576A Octal D-Type Edge-Triggered Flip-Flop with 3-STATE Outputs DM74ALS576A Octal D-Type Edge-Triggered Flip-Flop with 3-STATE Outputs These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. They are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the DM74ALS576A are edge-triggered inverting D-type flip-flops. On the positive transition of the clock, the Q outputs will be set to the complement of the logic states that were set up at the D inputs. A buffered output control input can be used to place the eight outputs in either a normal logic state HIGH or LOW logic levels or a high-impedance state. In the high-impedance state the outputs neither load nor drive the bus lines significantly. The output control does not affect the internal operation of the flip-flops. That is, the old data can be retained or new data can be entered even while the outputs are OFF. s Switching specifications at 50 pF s Switching specifications guaranteed over full tempera- ture and VCC range s Advanced oxide-isolated, ion-implanted Schottky TTL process s 3-STATE buffer-type outputs drive bus lines directly Ordering Code: Order Number Package Number Package Description DM74ALS576AWM M20B 20-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide DM74ALS576AN N20A 20-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram 2000 Fairchild Semiconductor Corporation DS006228 DM74ALS576A Function Table Output Control Clock L = LOW State H = HIGH State X = Don’t Care = Positive Edge Transition Z = High Impedance State Q0 = Previous Condition of Q Output Logic Diagram DM74ALS576A Absolute Maximum Ratings Note 1 Supply Voltage Input Voltage Applied to Disabled Output Operating Free Air Temperature Range Storage Temperature Range Typical N Package M Package 7V 5.5V 0°C to +70°C −65°C to +150°C 56.0°C/W 75.0°C/W Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Recommended Operating Conditions Parameter VCC VIH VIL IOH IOL fCLOCK tW Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Current LOW Level Output Current Clock Frequency Width of Clock Pulse HIGH LOW Data Setup Time Note 2 Data Hold Time Note 2 Free Air Operating Temperature Note 2 The arrow indicates the positive edge of the Clock is used for reference. Nom 5 Max 24 30 Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C. Parameter Conditions VIK VOH IIH IIL IO IOZH IOZL Input Clamp Voltage HIGH Level Output Voltage LOW Level Output Voltage Input Current Maximum Input Voltage HIGH Level Input Current LOW Level Input Current Output Drive Current OFF-State Output Current HIGH Level Voltage Applied OFF-State Output Current LOW Level Voltage Applied Supply Current VCC = 4.5V, II = −18 mA VCC = 4.5V VIL = VIL Max VCC = 4.5V to 5.5V VCC = 4.5V VIH = 2V VCC = 5.5V, VIH = 7V VCC = 5.5V, VIH = 2.7V VCC = 5.5V, VIL = 0.4V VCC = 5.5V, VO = 2.25V VCC = 5.5V, VIH = 2V VO = 2.7V VCC = 5.5V, VIH = 2V VO = 0.4V VCC = 5.5V Outputs OPEN IOH = Max IOH = −400 µA IOL = 24 mA |
More datasheets: U2100B-M | U2100B-MY | U2100B-MFP | U2100B-MFPG3 | DA-70310-1 | 26100-255-RC | 410-348 | DM74ALS576SJX | DM74ALS576AN | DM74ALS576AWMX |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DM74ALS576AWM Datasheet file may be downloaded here without warranties.