CNY29

CNY29 Datasheet

CNY29

Part	Datasheet
CNY29	CNY29 (pdf)

PDF Datasheet Preview
PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH CNY29 PACKAGE DIMENSIONS Ø Ø Optical CL PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER NOTES Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions unless otherwise specified. SCHEMATIC The CNY29 is a gallium arsenide infrared emitting diode coupled with a silicon photo darlington in a plastic housing. The gap in the housing provides a means of interrupting the signal with tape, cards, shaft encoders, or other opaque material, switching the output from an “ON” to an “OFF” state. • Opaque housing • Low cost • apertures • European “Pro Electron” registered 2001 Fairchild Semiconductor Corporation DS300282 5/24/01 1 OF 5 PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH CNY29 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Symbol TOPR TSTG TSOL-I TSOL-F VR PD VCEO VECO IC PD Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec 6 100 6 40 150 NOTE: Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing. ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C TEST CONDITIONS IF = 10 mA VR = 2 V IE = 100 µA, Ee = 0 IC = 10 mA, Ee = 0 VCE = 10 V, Ee = 0 BVECO BVCEO ICEO IF = 20 mA, VCE = 10 V IC ON IF = 20 mA, IC = mA VCE SAT IF = 10 mA, VCC = 5 V, RL = IF = 10 mA, VCC = 5 V, RL = toff Unit °C °C °C °C

PDF Datasheet Preview

PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH

CNY29

PACKAGE DIMENSIONS
Ø Ø

Optical CL

PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER

NOTES Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.

SCHEMATIC

The CNY29 is a gallium arsenide infrared emitting diode coupled with a silicon photo darlington in a plastic housing. The gap in the housing provides a means of interrupting the signal with tape, cards, shaft encoders, or other opaque material, switching the output from an “ON” to an “OFF” state.
• Opaque housing
• Low cost
• apertures
• European “Pro Electron” registered
2001 Fairchild Semiconductor Corporation DS300282 5/24/01
1 OF 5

PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH

CNY29

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Symbol TOPR TSTG TSOL-I TSOL-F

VR PD

VCEO

VECO IC PD

Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec
6 100
6 40 150

NOTE:

Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing.

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

TEST CONDITIONS

IF = 10 mA VR = 2 V

IE = 100 µA, Ee = 0

IC = 10 mA, Ee = 0 VCE = 10 V, Ee = 0

BVECO

BVCEO

ICEO

IF = 20 mA, VCE = 10 V

IC ON

IF = 20 mA, IC = mA

VCE SAT

IF = 10 mA, VCC = 5 V, RL =

IF = 10 mA, VCC = 5 V, RL =
toff

Unit °C °C °C °C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CNY29 Datasheet file may be downloaded here without warranties.

Datasheet ID: CNY29 513602