CD4015BCN

CD4015BCN Datasheet

CD4015BC Dual 4-Bit Static Shift Register

Part	Datasheet
CD4015BCN	CD4015BCN (pdf)

PDF Datasheet Preview
CD4015BC Dual 4-Bit Static Shift Register CD4015BC Dual 4-Bit Static Shift Register The CD4015BC contains two identical, 4-stage, serialinput/parallel-output registers with independent “Data”, “Clock,” and “Reset” inputs. The logic level present at the input of each stage is transferred to the output of that stage at each positive-going clock transition. A logic high on the “Reset” input resets all four stages covered by that input. All inputs are protected from static discharge by a series resistor and diode clamps to VDD and VSS. s Wide supply voltage range 3.0V to 18V s High noise immunity VDD typ. s Low power TTL Fan out of 2 driving 74L compatibility or 1 driving 74LS s Medium speed operation 8 MHz typ. clock rate s Fully static design − VSS = 10V • Serial-input/parallel-output data queueing • Serial to parallel data conversion • General purpose register Ordering Code: Order Number CD4015BCM CD4015BCN Package Number Package Description M16A 16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow N16E 16-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Connection Diagram Truth Table X = Don’t Care Case Note 1 Level Change R Q1 Qn 0 Qn−1 1 Qn−1 0 Q1 Qn No change 2004 Fairchild Semiconductor Corporation DS005948 CD4015BC Logic Diagrams Terminal No. 16 = VDD Terminal No. 8 = GND CD4015BC Absolute Maximum Ratings Note 2 Note 3 Recommended Operating Conditions DC Supply Voltage VDD Input Voltage VIN Storage Temperature Range TS Power Dissipation PD Dual-In-Line Small Outline Lead Temperature TL Soldering, 10 seconds to +18 VDC to VDD VDC −65°C to +150°C DC Supply Voltage VDD Input Voltage VIN Operating Temperature Range TA +3 to +15 VDC 0 to VDD VDC −55°C to +125°C 700 mW 500 mW 260°C Note 2 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation. Note 3 VSS = 0V unless otherwise specified. DC Electrical Characteristics Note 3 Parameter Conditions Quiescent Device VDD = 5V, VIN = VDD or VSS Current

PDF Datasheet Preview

CD4015BC Dual 4-Bit Static Shift Register

CD4015BC Dual 4-Bit Static Shift Register

The CD4015BC contains two identical, 4-stage, serialinput/parallel-output registers with independent “Data”, “Clock,” and “Reset” inputs. The logic level present at the input of each stage is transferred to the output of that stage at each positive-going clock transition. A logic high on the “Reset” input resets all four stages covered by that input. All inputs are protected from static discharge by a series resistor and diode clamps to VDD and VSS.
s Wide supply voltage range 3.0V to 18V s High noise immunity VDD typ. s Low power TTL Fan out of 2 driving 74L
compatibility or 1 driving 74LS s Medium speed operation 8 MHz typ. clock rate s Fully static design − VSS = 10V
• Serial-input/parallel-output data queueing
• Serial to parallel data conversion
• General purpose register
Ordering Code:

Order Number CD4015BCM CD4015BCN

Package Number

Package Description

M16A
16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

N16E
16-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide

Connection Diagram

Truth Table

X = Don’t Care Case Note 1 Level Change

R Q1 Qn
0 Qn−1
1 Qn−1
0 Q1 Qn No change
2004 Fairchild Semiconductor Corporation DS005948

CD4015BC

Logic Diagrams

Terminal No. 16 = VDD Terminal No. 8 = GND

CD4015BC

Absolute Maximum Ratings Note 2

Note 3

Recommended Operating Conditions

DC Supply Voltage VDD Input Voltage VIN Storage Temperature Range TS Power Dissipation PD

Dual-In-Line

Small Outline

Lead Temperature TL Soldering, 10 seconds
to +18 VDC to VDD VDC
−65°C to +150°C

DC Supply Voltage VDD Input Voltage VIN Operating Temperature Range TA
+3 to +15 VDC 0 to VDD VDC −55°C to +125°C
700 mW 500 mW
260°C

Note 2 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation.

Note 3 VSS = 0V unless otherwise specified.

DC Electrical Characteristics Note 3

Parameter

Conditions

Quiescent Device

VDD = 5V, VIN = VDD or VSS

Current

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CD4015BCN Datasheet file may be downloaded here without warranties.

Datasheet ID: CD4015BCN 513551