74LVQ32SCX

74LVQ32SCX Datasheet

74LVQ32 Low Voltage Quad 2-Input OR Gate

Part	Datasheet
74LVQ32SCX	74LVQ32SCX (pdf)

Related Parts	Information
74LVQ32SJ	74LVQ32SJ
74LVQ32SJX	74LVQ32SJX
74LVQ32SC	74LVQ32SC

PDF Datasheet Preview
74LVQ32 Low Voltage Quad 2-Input OR Gate 74LVQ32 Low Voltage Quad 2-Input OR Gate The LVQ32 contains four 2-input OR gates. s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into Ordering Code: Order Number Package Number Package Description 74LVQ32SC M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 74LVQ32SJ M14D 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names An, Bn On Description Inputs Outputs 2001 Fairchild Semiconductor Corporation DS011346 74LVQ32 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions Note 2 Supply Voltage VCC LVQ 2.0V to 3.6V Input Voltage VI Output Voltage VO Operating Temperature TA 74LVQ 0V to VCC 0V to VCC −40°C to +85°C Minimum Input Edge Rate VIN from 0.8V to 2.0V VCC 3.0V 125 mV/ns Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Parameter TA = +25°C TA = −40°C to +85°C Units Guaranteed Limits Conditions

PDF Datasheet Preview

74LVQ32 Low Voltage Quad 2-Input OR Gate
74LVQ32 Low Voltage Quad 2-Input OR Gate

The LVQ32 contains four 2-input OR gates.
s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and
dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into
Ordering Code:

Order Number Package Number

Package Description
74LVQ32SC

M14A
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow
74LVQ32SJ

M14D
14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagram

IEEE/IEC

Pin Descriptions

Pin Names An, Bn On

Description Inputs Outputs
2001 Fairchild Semiconductor Corporation DS011346
74LVQ32

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Input Diode Current IIK

VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source
or Sink Current IO DC VCC or Ground Current

ICC or IGND Storage Temperature TSTG DC Latch-Up Source or

Sink Current
−0.5V to +7.0V
−20 mA +20 mA −0.5V to VCC + 0.5V
−20 mA +20 mA −0.5V to VCC + 0.5V
±50 mA
±200 mA −65°C to +150°C
±100 mA

Recommended Operating Conditions Note 2

Supply Voltage VCC LVQ
2.0V to 3.6V

Input Voltage VI Output Voltage VO Operating Temperature TA
74LVQ
0V to VCC 0V to VCC
−40°C to +85°C

Minimum Input Edge Rate

VIN from 0.8V to 2.0V

VCC 3.0V
125 mV/ns

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 Unused inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Parameter

TA = +25°C

TA = −40°C to +85°C Units

Guaranteed Limits

Conditions

More datasheets: SP600-25 | SP600-90 | SP600-05 | SP600-02 | SP600-114 | SP600-104 | SP600-43 | SP600-54 | SP600-58 | 74LVQ32SJ

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74LVQ32SCX Datasheet file may be downloaded here without warranties.

Datasheet ID: 74LVQ32SCX 513414