74LVQ02SCX

74LVQ02SCX Datasheet

74LVQ02 Low Voltage Quad 2-Input NOR Gate

Part	Datasheet
74LVQ02SCX	74LVQ02SCX (pdf)

Related Parts	Information
74LVQ02SJ	74LVQ02SJ
74LVQ02SJX	74LVQ02SJX
74LVQ02SC	74LVQ02SC

PDF Datasheet Preview
74LVQ02 Low Voltage Quad 2-Input NOR Gate 74LVQ02 Low Voltage Quad 2-Input NOR Gate The LVQ02 contains four 2-input NOR gates. s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into Ordering Code: Order Number 74LVQ02SC 74LVQ02SJ Package Number M14A M14D Package Description 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names An, Bn On Description Inputs Outputs 2001 Fairchild Semiconductor Corporation DS011342 74LVQ02 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions Note 2 Supply Voltage VCC LVQ 2.0V to 3.6V Input Voltage VI Output Voltage VO Operating Temperature TA 74LVQ 0V to VCC 0V to VCC −40°C to +85°C Minimum Input Edge Rate VIN from 0.8V to 2.0V VCC 3.0V 125 mV/ns Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Parameter TA = +25°C TA = −40°C to +85°C Units Conditions Guaranteed Limits

PDF Datasheet Preview

74LVQ02 Low Voltage Quad 2-Input NOR Gate
74LVQ02 Low Voltage Quad 2-Input NOR Gate

The LVQ02 contains four 2-input NOR gates.
s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and
dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into
Ordering Code:

Order Number 74LVQ02SC 74LVQ02SJ

Package Number M14A M14D

Package Description 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagram

IEEE/IEC

Pin Descriptions

Pin Names An, Bn On

Description Inputs Outputs
2001 Fairchild Semiconductor Corporation DS011342
74LVQ02

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Input Diode Current IIK

VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source
or Sink Current IO DC VCC or Ground Current

ICC or IGND Storage Temperature TSTG DC Latch-Up Source or

Sink Current
−0.5V to +7.0V
−20 mA +20 mA −0.5V to VCC + 0.5V
−20 mA +20 mA −0.5V to VCC + 0.5V
±50 mA
±200 mA −65°C to +150°C
±100 mA

Recommended Operating Conditions Note 2

Supply Voltage VCC LVQ
2.0V to 3.6V

Input Voltage VI Output Voltage VO Operating Temperature TA
74LVQ
0V to VCC 0V to VCC
−40°C to +85°C

Minimum Input Edge Rate

VIN from 0.8V to 2.0V

VCC 3.0V
125 mV/ns

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 Unused inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Parameter

TA = +25°C

TA = −40°C to +85°C Units

Conditions

Guaranteed Limits

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74LVQ02SCX Datasheet file may be downloaded here without warranties.

Datasheet ID: 74LVQ02SCX 513398