74LVQ00SC

74LVQ00SC Datasheet

74LVQ00 Low Voltage Quad 2-Input NAND Gate

Part	Datasheet
74LVQ00SC	74LVQ00SC (pdf)

Related Parts	Information
74LVQ00SCX	74LVQ00SCX
74LVQ00SJ	74LVQ00SJ
74LVQ00SJX	74LVQ00SJX

PDF Datasheet Preview
74LVQ00 Low Voltage Quad 2-Input NAND Gate 74LVQ00 Low Voltage Quad 2-Input NAND Gate The LVQ00 contains four 2-input NAND gates. s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into Ordering Code: Order Number 74LVQ00SC 74LVQ00SJ Package Number M14A M14D Package Description 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names An, Bn On Description Inputs Outputs 2001 Fairchild Semiconductor Corporation DS011341 74LVQ00 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions Note 2 Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate 2.0V to 3.6V 0V to VCC 0V to VCC −40°C to +85°C VIN from 0.8V to 2.0V VCC 3.0V 125 mV/ns Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Parameter TA = +25°C TA = −40°C to +85°C Units Guaranteed Limits Conditions Minimum High Level Input Voltage Maximum Low Level

PDF Datasheet Preview

74LVQ00 Low Voltage Quad 2-Input NAND Gate
74LVQ00 Low Voltage Quad 2-Input NAND Gate

The LVQ00 contains four 2-input NAND gates.
s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and
dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into
Ordering Code:

Order Number 74LVQ00SC 74LVQ00SJ

Package Number M14A M14D

Package Description 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagram

IEEE/IEC

Pin Descriptions

Pin Names An, Bn On

Description Inputs Outputs
2001 Fairchild Semiconductor Corporation DS011341
74LVQ00

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Input Diode Current IIK

VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current
−0.5V to +7.0V
−20 mA +20 mA −0.5V to VCC + 0.5V
−20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA
±200 mA −65°C to +150°C
±100 mA

Recommended Operating Conditions Note 2

Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate
2.0V to 3.6V
0V to VCC 0V to VCC −40°C to +85°C

VIN from 0.8V to 2.0V

VCC 3.0V
125 mV/ns

Note 1 The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical

Characteristics tables are not guaranteed at the absolute maximum ratings.

The “Recommended Operating Conditions” table will define the conditions
for actual device operation.

Note 2 Unused inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Parameter

TA = +25°C

TA = −40°C to +85°C

Units

Guaranteed Limits

Conditions

Minimum High Level

Input Voltage

Maximum Low Level

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74LVQ00SC Datasheet file may be downloaded here without warranties.

Datasheet ID: 74LVQ00SC 513397