100314QI

100314QI Datasheet


100314 Low Power Quint Differential Line Receiver

Part Datasheet
100314QI 100314QI 100314QI (pdf)
Related Parts Information
100314QCX 100314QCX 100314QCX
100314SCX 100314SCX 100314SCX
100314SC 100314SC 100314SC
100314QC 100314QC 100314QC
100314QIX 100314QIX 100314QIX
PDF Datasheet Preview
100314 Low Power Quint Differential Line Receiver
100314 Low Power Quint Differential Line Receiver

The 100314 is a monolithic quint differential line receiver with emitter-follower outputs. An internal reference supply VBB is available for single-ended reception. When used in single-ended operation the apparent input threshold of the true inputs is 25 mV to 30 mV higher positive than the threshold of the complementary inputs. Unlike other F100K ECL devices, the inputs do not have input pull-down resistors.

Active current sources provide common-mode rejection of 1.0V in either the positive or negative direction. A defined output state exists if both inverting and non-inverting inputs are at the same potential between VEE and VCC. The defined state is logic HIGH on the outputs.
s 35% power reduction of the 100114 s 2000V ESD protection s Pin/function compatible with 100114 s Voltage compensated operating range = −4.2V to −5.7V s Available to industrial grade temperature range

PLCC package only
Ordering Code:

Order Number Package Number

Package Description
100314SC

M24B
24-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide
100314PC

N24E
24-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-010, Wide
100314QC

V28A
28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square
100314QI

V28A
28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square Industrial Temperature Range −40°C to +85°C
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagrams
24-Pin DIP/SOIC

Pin Descriptions

Pin Names

Description Data Inputs Inverting Data Inputs Data Outputs Complementary Data Outputs
2000 Fairchild Semiconductor Corporation DS010260
28-Pin PLCC
100314

Absolute Maximum Ratings Note 1

Storage Temperature TSTG Maximum Junction Temperature TJ Pin Potential to Ground Pin VEE Input Voltage DC Output Current DC Output HIGH ESD Note 2
−65°C to +150°C +150°C
−7.0V to +0.5V VEE to +0.5V −50 mA

Commercial Version

Recommended Operating Conditions

Case Temperature TC Commercial
0°C to +85°C

Industrial
−40°C to +85°C

Supply Voltage VEE
−5.7V to −4.2V

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 ESD testing conforms to MIL-STD-883, Method

DC Electrical Characteristics Note 3

VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C

Parameter

Units

Conditions

VOH VOL VOHC VOLC VBB VDIFF VCM VIH

IIL IIH

ICBO

Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Output Reference Voltage Input Voltage Differential Common Mode Voltage Single-Ended Input HIGH Voltage

Single-Ended Input LOW Voltage

Input LOW Current Input HIGH Current

Input Leakage Current
−1025 −1830 −1035
−1380 150
−955 −1705
−1320
−870 −1620
More datasheets: CY2XP31ZXIT | CY2XP31ZXCT | 19039693A | M3442 SL002 | M3442 SL001 | M3442 SL005 | 275 | 100314QCX | 100314SCX | 100314SC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 100314QI Datasheet file may be downloaded here without warranties.

Datasheet ID: 100314QI 512964