CYIL1SM4000AA-GDC

CYIL1SM4000AA-GDC Datasheet

CYIL1SM4000AA

Part	Datasheet
CYIL1SM4000AA-GDC	CYIL1SM4000AA-GDC (pdf)

Related Parts	Information
CYIL1SM4000-EVAL	CYIL1SM4000-EVAL

PDF Datasheet Preview
CYIL1SM4000AA LUPA 4000 4 MegaPixel CMOS Image Sensor • 2048 x 2048 active pixels • 12 µm x 12 µm square pixels • Optical format mm x mm • Monochrome or Color digital output • 15 fps frame rate at full resolution • 2 on-chip 10-bit ADCs • Random programmable windowing and sub-sampling modes • Full snapshot shutter • Binning voltage averaging in X-direction • Limited supplies Nominal 2.5V some supplies require 3.3V • Serial to Parallel Interface SPI • 0°C to 60°C operational temperature range • 127-pin PGA package • Power dissipation < 200 mW High dynamic range scenes can be captured using the double and multiple slope functionality. The sensor is used with one or two outputs. Two on-chip 10-bit ADCs are used to convert the analog data to a 10-bit digital word stream. The sensor uses a 3-wire SPI. It is housed in a 127-pin ceramic PGA package. This data sheet allows the user to develop a camera system based on the described timing and interfacing. The LUPA 4000 is available in color and monochrome without the cover glass. For engineering samples, contact Figure LUPA 4000 Photo • Intelligent traffic system • High speed machine vision Overview This document describes the interfacing and driving of the LUPA 4000 image sensor. This 4 mega-pixel CMOS active pixel sensor features synchronous shutter and a maximal frame rate of 15 fps in full resolution. The readout speed can be boosted by sub-sampling and windowed Region of Interest ROI readout. Ordering Information Marketing Part Number CYIL1SM4000AA-GDC CYIL1SM4000AA-GDCN CYIL1SM4000AA-GWC CYIL1SC4000AA-GDC CYIL1SM4000-EVAL Description Mono with Glass Mono with Glass, Nitrogen filled Mono without Glass Color without Glass Mono Demo Kit Package 127 pin PGA Demo Kit • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CYIL1SM4000AA Specifications General Specifications Table General Specifications Parameter Active Pixels Pixel Size Pixel Type Pixel Rate Shutter Type Frame Rate Master Clock Windowing ROI Read Out ADC Resolution Sensitivity Extended Dynamic Range Specification 2048 H x 2048 V 12 um x 12 um 6 Transistor Pixel 66 MHz using a 33 Mhz system clock and one or two parallel outputs Full Snapshot Shutter integration during readout is possible 15 fps at Mpixel can be boosted by sub sampling and windowing 33 MHz Randomly programmable ROI read out Windowed, flipped, mirrored, and sub-sampled read out possible voltage averaging in the x-direction 2 on-chip, 10 bit V/lux.s in the visible band only 180 lux=1 W/m2 66 dB 2000:1 in single slope operation and up to 90 dB in multiple slope operation Electro-Optical Specifications Table Electro-Optical Specifications Parameter Conversion Gain Full Well Charge Sensitivity Fill Factor Parasitic Light Sensitivity Dark Noise QE x FF FPN PRNU Dark Signal Noise Electrons S/N Ratio MTF Power Dissipation uV/e27000e2090 V.m2/W.s Average white light Value <1/5000 21e- 37% at 680 nm rms of output signal amplitude of 1V rms at 25% and 75% of output signal <140 mV/s at 21°C < 40e- 2000:1 at 66 dB single slope operation <200 mW typical without ADCs Page 2 of 31 [+] Feedback Spectral response [A/W] Figure Spectral Response Curve for Mono QE 40% QE 30% CYIL1SM4000AA QE 25% QE 20% QE 10% 1000 Wavelength [nm] Figure Spectral Response Curve for Color Figure 2 and Figure 3 show the spectral response characteristic. The curve is measured directly on the pixels. It includes effects of non sensitive areas in the pixel such as interconnection lines. The sensor is light sensitive between 400 nm and 1000 nm. The peak QE * FF is approximately between 500 nm and 700 nm. In view of a fill-factor of 60%, the QE is thus larger than 60% between 500 nm and 700 nm. Page 3 of 31 [+] Feedback CYIL1SM4000AA Figure Photo-Voltaic Response Curve See ECN Ordering information update+ title update + package spec label C 2738057 NVEA/PYRS 07/16/09 Updated template, extensive content edits D 2765859 NVEA 09/18/09 Updated Ordering Information table Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications. Consumer applications include solutions for fast growing high speed machine vision, motion monitoring, medical imaging, intelligent traffic systems, security, and barcode applications. Cypress's customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic range, and high sensitivity. Cypress maintains a worldwide network of offices, solution centers, manufacturer's representatives, and distributors. For more information on Image sensors, please contact Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. All products and company names mentioned in this document may be the trademarks of their respective holders Page 31 of 31 [+] Feedback

PDF Datasheet Preview

CYIL1SM4000AA

LUPA 4000 4 MegaPixel CMOS Image Sensor
• 2048 x 2048 active pixels
• 12 µm x 12 µm square pixels
• Optical format mm x mm
• Monochrome or Color digital output
• 15 fps frame rate at full resolution
• 2 on-chip 10-bit ADCs
• Random programmable windowing and sub-sampling modes
• Full snapshot shutter
• Binning voltage averaging in X-direction
• Limited supplies Nominal 2.5V some supplies require 3.3V
• Serial to Parallel Interface SPI
• 0°C to 60°C operational temperature range
• 127-pin PGA package
• Power dissipation < 200 mW

High dynamic range scenes can be captured using the double and multiple slope functionality.

The sensor is used with one or two outputs. Two on-chip 10-bit ADCs are used to convert the analog data to a 10-bit digital word stream. The sensor uses a 3-wire SPI. It is housed in a 127-pin ceramic PGA package.

This data sheet allows the user to develop a camera system based on the described timing and interfacing.

The LUPA 4000 is available in color and monochrome without the cover glass.

For engineering samples, contact

Figure LUPA 4000 Photo
• Intelligent traffic system
• High speed machine vision

Overview

This document describes the interfacing and driving of the LUPA 4000 image sensor. This 4 mega-pixel CMOS active pixel sensor features synchronous shutter and a maximal frame rate of 15 fps in full resolution. The readout speed can be boosted by sub-sampling and windowed Region of Interest ROI readout.
Ordering Information

Marketing Part Number CYIL1SM4000AA-GDC CYIL1SM4000AA-GDCN CYIL1SM4000AA-GWC CYIL1SC4000AA-GDC CYIL1SM4000-EVAL

Description Mono with Glass Mono with Glass, Nitrogen filled Mono without Glass Color without Glass Mono Demo Kit

Package 127 pin PGA

Demo Kit
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CYIL1SM4000AA

Specifications

General Specifications Table General Specifications

Parameter Active Pixels Pixel Size Pixel Type Pixel Rate Shutter Type Frame Rate Master Clock Windowing ROI Read Out

ADC Resolution Sensitivity Extended Dynamic Range

Specification 2048 H x 2048 V 12 um x 12 um 6 Transistor Pixel 66 MHz using a 33 Mhz system clock and one or two parallel outputs Full Snapshot Shutter integration during readout is possible 15 fps at Mpixel can be boosted by sub sampling and windowing 33 MHz Randomly programmable ROI read out Windowed, flipped, mirrored, and sub-sampled read out possible voltage averaging in the x-direction 2 on-chip, 10 bit V/lux.s in the visible band only 180 lux=1 W/m2 66 dB 2000:1 in single slope operation and up to 90 dB in multiple slope operation

Electro-Optical Specifications

Table Electro-Optical Specifications

Parameter Conversion Gain Full Well Charge Sensitivity Fill Factor Parasitic Light Sensitivity Dark Noise QE x FF FPN PRNU Dark Signal Noise Electrons S/N Ratio MTF Power Dissipation
uV/e27000e2090 V.m2/W.s Average white light

Value
<1/5000 21e-
37% at 680 nm
rms of output signal amplitude of 1V
rms at 25% and 75% of output signal
<140 mV/s at 21°C < 40e-
2000:1 at 66 dB single slope operation
<200 mW typical without ADCs

Page 2 of 31 [+] Feedback

Spectral response [A/W]

Figure Spectral Response Curve for Mono

QE 40%

QE 30%

CYIL1SM4000AA

QE 25% QE 20%

QE 10%
1000

Wavelength [nm]

Figure Spectral Response Curve for Color

Figure 2 and Figure 3 show the spectral response characteristic. The curve is measured directly on the pixels. It includes effects of non sensitive areas in the pixel such as interconnection lines. The sensor is light sensitive between 400 nm and 1000 nm. The peak QE * FF is approximately between 500 nm and 700 nm. In view of a fill-factor of 60%, the QE is thus larger than 60% between 500 nm and 700 nm.

Page 3 of 31
[+] Feedback

CYIL1SM4000AA

Figure Photo-Voltaic Response Curve
See ECN Ordering information update+ title update + package spec label
*C 2738057 NVEA/PYRS 07/16/09 Updated template, extensive content edits
*D 2765859

NVEA
09/18/09 Updated Ordering Information table

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications. Consumer applications include solutions for fast growing high speed machine vision, motion monitoring, medical imaging, intelligent traffic systems, security, and barcode applications. Cypress's customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic range, and high sensitivity.

Cypress maintains a worldwide network of offices, solution centers, manufacturer's representatives, and distributors. For more information on Image sensors, please contact

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

All products and company names mentioned in this document may be the trademarks of their respective holders

Page 31 of 31
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CYIL1SM4000AA-GDC Datasheet file may be downloaded here without warranties.

Datasheet ID: CYIL1SM4000AA-GDC 508275