VLG-MC9S12ZVC

VLG-MC9S12ZVC Datasheet

Default jumper positions of the VLG-S12ZVC board are shown in the following section.

Part	Datasheet
VLG-MC9S12ZVC	VLG-MC9S12ZVC (pdf)

PDF Datasheet Preview
Freescale Semiconductor User Guide S12ZVC Evaluation Board Quick Start Guide MagniV Mixed-signal MCUs by Jesús Luis Olea 1 Introduction and default settings This guide shows how to quickly connect the board to a host PC and execute a demonstration application preloaded in to the flash memory. The S12ZVC MCU integrates: • S12Z CPU • Power supply • PNP external ballast transistor for VDDX, VDDA, and VDDC • LED power indicators • Reset • LEDs • Buzzer • ADC potentiometer • Keyboard matrix • High-voltage input • Sensors • Temperature and humidity • Pressure sensor • Inertial sensor SPI X-Y axis • SENT • CAN • LIN Default jumper positions of the VLG-S12ZVC board are shown in the following section. 2014 Freescale Semiconductor, Inc. Contents 1 Introduction and default settings...............................1 2 Device overview S12ZVC family.............................2 3 Jumper default 4 Software tools Install CodeWarrior development Non-Disclosure Agreement required Dev•ice overview S12ZVC family • 2 Device overview S12ZVC family The MC9S12ZVC family is a new member of the S12 MagniV product line integrating a battery level 12 V voltage regulator, supply voltage monitoring, high voltage inputs, and a CAN physical interface. It’s primarily targeting at CAN nodes like sensors, switch panels, or small actuators. It offers various low-power modes and wake-up management to address state of the art power consumption requirements. Some members of the MC9S12ZVC family are also offered for high temperature applications requiring AEC-Q100 Grade 0 -40°C to +150°C ambient operating temperature range . The MC9S12ZVC family is based on the enhanced performance, linear address space S12Z core and delivers an optimized solution with the integration of several key system components into a single device, optimizing system architecture and achieving significant space savings. Figure S12ZVC architecture diagram1 3 Jumper default configuration This section describes about the jumper configuration. Block Diagram shows the maximum configuration. Not all pins or all peripherals are available on all devices and packages. Rerouting options are not shown. Freescale Semiconductor, Inc. Non-Disclosure Agreement required Jumper default configuration Figure Jumper configuration diagram The following table lists the jumper default configuration. Table Jumper default configuration Header J5 J8 J10 J11 J12 J13 J15 J14 J20 J48 J50 J16 J17 J18 J19 J22 J25 J26 Reference position 1-2 1-2-3 1-2 1-2-3 1-2 1-2 1-2, 3-4, 5-6, 7-8 1,2 1-2, 3-4, 5-6, 7-8, 9-10, 11-12, 13-14, 15-16 1, 2 1, 2 1, 2 1, 2 1-2, 3-4, 5-6, 7-8 1, 2 1- 2 Table continues on the next page... Freescale Semiconductor, Inc. Non-Disclosure Agreement required Software tools installation Table Jumper default configuration continued Header J29 J30 J31 J35 Reference position 1- 2 1- 2 1- 2 1- 2 4 Software tools installation This section describes how to get started with the S12ZVC board by installing CodeWarrior development studio and testing the demo program that comes programmed with the board.

PDF Datasheet Preview

Freescale Semiconductor User Guide

S12ZVC Evaluation Board Quick Start Guide

MagniV Mixed-signal MCUs
by Jesús Luis Olea
1 Introduction and default settings

This guide shows how to quickly connect the board to a host PC and execute a demonstration application preloaded in to the flash memory.

The S12ZVC MCU integrates:
• S12Z CPU
• Power supply
• PNP external ballast transistor for VDDX, VDDA, and VDDC
• LED power indicators
• Reset
• LEDs
• Buzzer
• ADC potentiometer
• Keyboard matrix
• High-voltage input
• Sensors
• Temperature and humidity
• Pressure sensor
• Inertial sensor SPI X-Y axis
• SENT
• CAN
• LIN

Default jumper positions of the VLG-S12ZVC board are shown in the following section.
2014 Freescale Semiconductor, Inc.

Contents 1 Introduction and default settings...............................1 2 Device overview S12ZVC family.............................2 3 Jumper default 4 Software tools

Install CodeWarrior development

Non-Disclosure Agreement required

Dev•ice overview S12ZVC family
•
2 Device overview S12ZVC family

The MC9S12ZVC family is a new member of the S12 MagniV product line integrating a battery level 12 V voltage regulator, supply voltage monitoring, high voltage inputs, and a CAN physical interface. It’s primarily targeting at CAN nodes like sensors, switch panels, or small actuators. It offers various low-power modes and wake-up management to address state of the art power consumption requirements.

Some members of the MC9S12ZVC family are also offered for high temperature applications requiring AEC-Q100 Grade 0 -40°C to +150°C ambient operating temperature range . The MC9S12ZVC family is based on the enhanced performance, linear address space S12Z core and delivers an optimized solution with the integration of several key system components into a single device, optimizing system architecture and achieving significant space savings.

Figure S12ZVC architecture diagram1
3 Jumper default configuration

This section describes about the jumper configuration.

Block Diagram shows the maximum configuration. Not all pins or all peripherals are available on all devices and packages. Rerouting options are not shown.

Freescale Semiconductor, Inc.

Non-Disclosure Agreement required

Jumper default configuration

Figure Jumper configuration diagram

The following table lists the jumper default configuration.

Table Jumper default configuration

Header J5 J8 J10 J11 J12 J13 J15 J14 J20 J48 J50 J16 J17 J18 J19 J22 J25 J26

Reference position 1-2 1-2-3 1-2 1-2-3 1-2 1-2 1-2, 3-4, 5-6, 7-8 1,2 1-2, 3-4, 5-6, 7-8, 9-10, 11-12, 13-14, 15-16 1, 2 1, 2 1, 2 1, 2 1-2, 3-4, 5-6, 7-8 1, 2 1- 2

Table continues on the next page...

Freescale Semiconductor, Inc.

Non-Disclosure Agreement required

Software tools installation

Table Jumper default configuration continued

Header J29 J30 J31 J35

Reference position 1- 2 1- 2 1- 2 1- 2
4 Software tools installation

This section describes how to get started with the S12ZVC board by installing CodeWarrior development studio and testing the demo program that comes programmed with the board.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived VLG-MC9S12ZVC Datasheet file may be downloaded here without warranties.

Datasheet ID: VLG-MC9S12ZVC 635628