MPVZ2202GC6T1
MPVZ2202GC6T1 Datasheet
The MPVZ2202 device series is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output - directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation. They are designed for use in applications such as pump/motor controllers, robotics, level indicators, medical diagnostics, pressure switching and respiratory equipment.
| Part | Datasheet |
|---|---|
MPVZ2202GC6T1 |
MPVZ2202GC6T1 (pdf) |
| Related Parts | Information |
|---|---|
MPVZ2202GC7U |
MPVZ2202GC7U |
| PDF Datasheet Preview |
|---|
| Freescale Semiconductor Technical Data 200 kPa On-Chip Temperature Compensated & Calibrated Pressure Sensors The MPVZ2202 device series is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output - directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation. They are designed for use in applications such as pump/motor controllers, robotics, level indicators, medical diagnostics, pressure switching and respiratory equipment. Features • Temperature Compensated Over 0°C to +85°C • Easy-to-Use Chip Carrier Package Options • Increased media compatibility fluorocarbon gel Typical Applications • Pump/Motor Controllers • Robotics • Level Indicators • Medical Diagnostics • Pressure Switching • Respiratory Equipment ORDERING INFORMATION Device Type Options Case No. MPX Series Order No. Packing Options SMALL OUTLINE PACKAGE MPVZ2202 SERIES Ported Gauge, Vertical Port, 482A MPVZ2202GC6T1 Tape and Elements Surface Mount Reel Gauge, Vertical Port, 482C MPVZ2202GC7U Through Hole Tube Device Marking MPVZ2202G MPVZ2202G MPVZ2202 SERIES 0 TO 200 kPA 0 TO 29 psi 40 mV FULL SCALE SPAN TYPICAL SMALL OUTLINE PACKAGE SURFACE MOUNT MPVZ2202GC6T1 CASE 482A-01 MPVZ2202GC7U CASE 482C-03 SMALL OUTLINE PACKAGE PIN NUMBERS GND 1 +VOUT Pin 1 is noted by the notch in the lead. Freescale Semiconductor, Inc., All rights reserved. Figure 1 illustrates a block diagram of the internal circuitry on the stand-alone pressure sensor chip. Sensing Element Thin Film Temperature Compensation And Calibration Circuitry 2 Vout+ 4 Vout- 1 GND Figure Temperature Compensated Pressure Sensor Schematic VOLTAGE OUTPUT VERSUS APPLIED DIFFERENTIAL PRESSURE The differential voltage output of the sensor is directly proportional to the differential pressure applied. The output voltage of the differential or gauge sensor increases with increasing pressure applied to the pressure P1 side relative to the vacuum P2 side. Similarly, output voltage increases as increasing vacuum is applied to the vacuum P2 side relative to the pressure P1 side. Table Maximum Ratings 1 Rating Value |
| More datasheets: 896-30-004-90-000000 | DBMMY25PR | MPC17511EP | MPC17511EVEL | MPC17511EV | MPC17511EPR2 | DBM25SLNMK52 | DCMT8X8SN | MAXQ30-FPBM-TFP3Q# | MPVZ2202GC7U |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MPVZ2202GC6T1 Datasheet file may be downloaded here without warranties.