DKSB1013A

DKSB1013A Datasheet


DKSB1013A

Part Datasheet
DKSB1013A DKSB1013A DKSB1013A (pdf)
PDF Datasheet Preview
DKSB1013A

PAN1555 Evaluation Board
14 February 2012
• PAN1555 Bluetooth v2.0 class 2 module with SPP Serial Port Profile
• Header locations for solderless breadboard, socket, or 4-pin header for essential signals.
• Pin and geometry compatible with modules, including pins for 3VDC, Ground, Tx, Rx,

CTS, RTS, Reset, and select ADC and GPIO signals
• Optional linear regulator MCP1700T-3302E/TT to allow up to a 6VDC supply on header P3

Quick Start

Solder either the 4-position the two 10-position or the two 2mm pitch headers to the bottom of the PCB.

Connect the breakout board’s Ground, 3.3VDC, Tx, and Rx lines to your target. Power on the module and begin the pairing process with your host device PC, Android, etc. The device name is BlueMod+P2x/G2 05:D3 where 05:D3 is the last four characters of the

MAC address of the PAN1555. The MAC address is seventh line of text on the PAN1555. If prompted, the Bluetooth pass code is 0000 four zeros . Begin serial data transmissions with your target device as if a serial cable is connected.

Page 1 of 6

PAN1555 Evaluation Board

Functional Description

The DKSB1013A breakout board allows evaluation the PAN1555 Bluetooth module without soldering the module to your target PCB. It also adds Bluetooth communication or control to devices that are designed around modules from Digi. The 2mm header positions are pin and geometrically compatible with modules for the following signals and pins:
• 3.3VDC pin 1 and ground pin 10
• Tx data out, pin 2 and Rx data in, pin 3
• CTS pin 12 and RTS pin 16
• Reset pin 5
• Analog input pin 17
• GPIO pins 4, 6, 7, 11, and 15

The LED D1 flashes when the unit is powered on, and is lit when a serial link is established not when the unit is paired . For more information, please see the PAN1555 datasheet.

C2, C3, and U2 are intentionally unpopulated, as they are not needed when using the DKSB1013A as a drop-in replacement for an module. To use a five-volt supply on header P3, purchase and solder to the PCB an MCP1700T3302ETT voltage regulator and two 1uF ceramic 0805 capacitors for example, Digi-Key part number 445-3463-1-ND .

The four-pin header P3 includes the four essential signals for the PAN1555. These signals are Ground, 5VDC, Tx, and Rx. The included four pin header is intended for use in a solderless breadboard. Note that components C2, C3, and U2 have been added in the photo below.

Digi-Key Corporation

Page 2 of 6

PAN1555 Evaluation Board

Layout

Top View

Bottom View

Digi-Key Corporation

Page 3 of 6

PAN1555 Evaluation Board

Dimensions

Digi-Key Corporation

Page 4 of 6

PAN1555 Evaluation Board

Bill of Materials

Part

Digi-Key Part Number

Mfg Part Number
445-3448-1-ND

CAP CER 10UF 6.3V Y5V 0603

C1608Y5V0J106Z

P14137CT-ND

LED BLUE HIGH BRIGHT ESS SMD

LNJ936W8CRA

P100GCT-ND
More datasheets: CRD10CM0AK | CRD10RM0AK | CRD16CM0CK | CRD16RM0CK | CRD10RM0CK | CRD10CM0SKR | CRD10RM0SKR | M64846 SL005 | M64846 SL002 | M64846 SL001


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DKSB1013A Datasheet file may be downloaded here without warranties.

Datasheet ID: DKSB1013A 509467