MP5092GD-P

MP5092GD-P Datasheet

MP5092

Part	Datasheet
MP5092GD-P	MP5092GD-P (pdf)

Related Parts	Information
MP5092GD-Z	MP5092GD-Z

PDF Datasheet Preview
The Future of Analog IC Technology MP5092 Dual 5.5V, 7.5A Programmable Current Low RDSON Load Switch with Output Discharge Function The MP5092 integrated a dual load switches to provide load protection covering 0.5V to 5.5V voltage range. Any one channel can work alone. Each channel can provide 7.5A load capability. With the small RDSON in tiny package, MP5092 provides very high efficient and space saving solution in notebook and tablet or other portable devices applications. With the soft start function, the MP5092 can avoid inrush current during circuit start up. MP5092 also provides different functions, like programmable soft start time, output discharge functions, OCP and thermal shutdown features. The max load at the output source is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from ILIM pin to ground. Tiny 18 pins QFN 2mmx3mm of MP5092 is available in space saving package. • Integrated Low RDSON FETs • Adjustable Start Up Slew Rate • Wide VIN Range from 0.5V to 5.5V • <1uA Shutdown Current • Programmable 7.5A Current Limit Range • Output Discharge Function • Enable Pin • <200ns Short-Circuitry Response Protection • Thermal Protection • Small QFN-18 2mmx3mm Package for Space Saving • Notebook and Tablet Computers • Portable Devices • Solid State Drivers • Handheld Devices All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. 1/8/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved. MP5092 DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION ORDERING INFORMATION Part Number* MP5092GD Package QFN-18 2mmx3mm Top Marking See Below * For Tape & Reel, add suffix e.g. TOP MARKING AKF product code of MP5092GD Y year code LLL lot number; PACKAGE REFERENCE TOP VIEW QFN-18 2mmx3mm 1/8/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved. MP5092 DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION ABSOLUTE MAXIMUM RATINGS 1 VIN1/2 to +6.5V VCC1/2 to +6.5V VOUT1/2 to +6.5V All Other to Vcc+0.3 V Junction Temperature 150°C Lead Temperature 260°C Continuous Power Dissipation 2 QFN18 2mmx3mm ..................................1.8W Recommended Operating Conditions 3 Supply Voltage VIN1/2 0.5V to 5.5V Supply Voltage VCC1/2 3V to 5.5V Output Voltage VOUT1/2.................... 0.5V to 5.5V Operating Junction Temp. TJ . -40°C to +125°C Thermal Resistance 4 QFN-18 2mmx3mm 15 °C/W Notes 1 Exceeding these ratings may damage the device. 2 The maximum allowable power dissipation is a function of the maximum junction temperature TJ MAX , the junction-toambient thermal resistance and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD MAX = TJ Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3 The device is not guaranteed to function outside of its operating conditions. 4 Measured on JESD51-7, 4-layer PCB. 1/8/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved. MP5092 DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION ELECTRICAL CHARACTERISTICS VIN = 3.6V, VCC = 3.6V, TA = 25°C, unless otherwise noted. Parameters Symbol Condition Input and Supply Voltage Range Input Voltage Supply Voltage Supply Current Single Channel Off State Leakage Current IOFF VIN=5V, EN=0 VCC Standby Current Power FET ISTBY VCC=5V, EN=0 VCC=5V, Enable, No load ON Resistance RDSON

PDF Datasheet Preview

The Future of Analog IC Technology

MP5092

Dual 5.5V, 7.5A Programmable Current Low RDSON Load Switch
with Output Discharge Function

The MP5092 integrated a dual load switches to provide load protection covering 0.5V to 5.5V voltage range. Any one channel can work alone. Each channel can provide 7.5A load capability. With the small RDSON in tiny package, MP5092 provides very high efficient and space saving solution in notebook and tablet or other portable devices applications.

With the soft start function, the MP5092 can avoid inrush current during circuit start up. MP5092 also provides different functions, like programmable soft start time, output discharge functions, OCP and thermal shutdown features.

The max load at the output source is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from ILIM pin to ground.

Tiny 18 pins QFN 2mmx3mm of MP5092 is available in space saving package.
• Integrated Low RDSON FETs
• Adjustable Start Up Slew Rate
• Wide VIN Range from 0.5V to 5.5V
• <1uA Shutdown Current
• Programmable 7.5A Current Limit Range
• Output Discharge Function
• Enable Pin
• <200ns Short-Circuitry Response Protection
• Thermal Protection
• Small QFN-18 2mmx3mm Package for

Space Saving
• Notebook and Tablet Computers
• Portable Devices
• Solid State Drivers
• Handheld Devices

All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc.
1/8/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
2015 MPS. All Rights Reserved.

MP5092 DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION
ORDERING INFORMATION

Part Number* MP5092GD

Package QFN-18 2mmx3mm

Top Marking See Below
* For Tape & Reel, add suffix e.g.

TOP MARKING

AKF product code of MP5092GD Y year code LLL lot number;

PACKAGE REFERENCE

TOP VIEW

QFN-18 2mmx3mm
1/8/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
2015 MPS. All Rights Reserved.

MP5092 DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION

ABSOLUTE MAXIMUM RATINGS 1

VIN1/2 to +6.5V VCC1/2 to +6.5V VOUT1/2 to +6.5V All Other to Vcc+0.3 V Junction Temperature 150°C Lead Temperature 260°C Continuous Power Dissipation 2

QFN18 2mmx3mm ..................................1.8W

Recommended Operating Conditions 3

Supply Voltage VIN1/2 0.5V to 5.5V Supply Voltage VCC1/2 3V to 5.5V Output Voltage VOUT1/2.................... 0.5V to 5.5V Operating Junction Temp. TJ . -40°C to +125°C

Thermal Resistance 4 QFN-18 2mmx3mm 15 °C/W

Notes 1 Exceeding these ratings may damage the device. 2 The maximum allowable power dissipation is a function of the
maximum junction temperature TJ MAX , the junction-toambient thermal resistance and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD MAX = TJ Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3 The device is not guaranteed to function outside of its operating conditions. 4 Measured on JESD51-7, 4-layer PCB.
1/8/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
2015 MPS. All Rights Reserved.

MP5092 DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION

ELECTRICAL CHARACTERISTICS

VIN = 3.6V, VCC = 3.6V, TA = 25°C, unless otherwise noted.

Parameters

Symbol Condition

Input and Supply Voltage Range

Input Voltage

Supply Voltage

Supply Current Single Channel

Off State Leakage Current

IOFF VIN=5V, EN=0

VCC Standby Current Power FET

ISTBY

VCC=5V, EN=0 VCC=5V, Enable, No load

ON Resistance

RDSON

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MP5092GD-P Datasheet file may be downloaded here without warranties.

Datasheet ID: MP5092GD-P 650039