MP1527DM-LF

MP1527DM-LF Datasheet


MP1527

Part Datasheet
MP1527DM-LF MP1527DM-LF MP1527DM-LF (pdf)
Related Parts Information
MP1527DM-LF-Z MP1527DM-LF-Z MP1527DM-LF-Z
MP1527DR-LF-P MP1527DR-LF-P MP1527DR-LF-P
MP1527DR-LF-Z MP1527DR-LF-Z MP1527DR-LF-Z
PDF Datasheet Preview
Monolithic Power Systems

MP1527
2A, 1.3MHz Step-Up Converter

The MP1527 is a 2A, fixed frequency step-up converter in a tiny 16 lead QFN package. The high 1.3MHz switching frequency allows for smaller external components producing a compact solution for medium-to-high current step-up, flyback, and SEPIC applications.

The MP1527 regulates the output voltage up to 25V at efficiency as high as Soft-start, timer-latch fault circuitry, cycle-by-cycle current limiting, and input undervoltage lockout prevent overstressing or damage to external circuitry at startup and output short-circuit conditions. Fixed frequency operation eases control of noise making the MP1527 optimal for noise sensitive applications such as mobile handsets and wireless LAN PC cards. Current-mode regulation and external compensation components allow the MP1527 control loop to be optimized over wide variety of input voltage, output voltage and load current conditions.

The MP1527 is offered in a tiny 4mm x 4mm 16 lead QFN and 14 lead TSSOP packages.

Figure 1 Typical Application Circuit

VIN = 2.6V to 25V
2A Peak Current Limit Internal Power Switch VIN Range of 2.6V to 25V >93% Efficiency Zero Current Shutdown Mode Under Voltage Lockout Protection Timer-Latch Fault Detection Soft Start Operation Thermal Shutdown Tiny 4mm x 4mm 16 pin QFN Package Evaluation Board Available

SOHO Routers, PCMCIA Cards, Mini PCI Handheld Computers, PDAs Cell Phones, Digital and Video Cameras Small LCD Display
Ordering Information

Part Number Package

Temperature

MP1527DR

QFN16 4x4 -40° to +85°C

MP1527DM

TSSOP14
-40° to +85°C

EV0034

MP1527DR Evaluation Board
∗ For Tape & Reel, add suffix e.g. For Lead Free, add suffix e.g.

FAULT ON/OFF

FAULT

COMP

SGND PGND

VOUT = 3.3V to 25V

MP1527 Rev

Monolithic Power Systems, Inc.

Monolithic Power Systems

MP1527
2A, 1.3MHz Step-Up Converter

Absolute Maximum Ratings Note 1

Input Supply Voltage VIN
-0.3V to 27V

SW Pin Voltage VSW Voltage at All Other Pins
-0.3V to 27V -0.3V to 6V

Storage Temperature
-55°C to +150°C

Recommended Operating Conditions

IN Input Supply Voltage VIN Step Up Output Voltage
2.6V to 25V 3.3V to 25V

Operating Temperature
-40°C to +85°C

Package Thermal Characteristics Thermal Resistance ΘJA TSSOP14 Thermal Resistance ΘJA QFN16 Note 2
90°C/W 46°C/W

Electrical Characteristics VIN = 5.0V, TA = 25°C unless specified otherwise

Parameters

Conditions

IN Shutdown Supply Current IN Operating Supply Current BP Output Voltage IN Undervoltage Lockout Threshold IN Undervoltage Lockout Hysteresis EN Input Low Voltage EN Input High Voltage EN Input Hysteresis EN Input Bias Current SW Switching Frequency SW Maximum Duty Cycle Error Amplifier Voltage Gain Error Amplifier Transconductance COMP Maximum Output Current FB Regulation Threshold FB Input Bias Current SS Charging Current

VEN<0.3V VEN>2V, VFB=1.1V VIN = 2.6V to 25V VIN Rising

VFB = 1.1V
More datasheets: FR101-TP | FTL410QD4C | P1200SC | P2000SB | P2000SC | P2500SC | DCMM17W5SA197 | MP1527DM-LF-Z | MP1527DR-LF-P | MP1527DR-LF-Z


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MP1527DM-LF Datasheet file may be downloaded here without warranties.

Datasheet ID: MP1527DM-LF 650012