640160042

640160042 Datasheet

64016-0039

Part	Datasheet
640160042	640160042 (pdf)

PDF Datasheet Preview
64016-0039 64016-0039 rviceGrade ServiceSeGrvirceaGdraede -Function Tool mienta Para Uso Múltiple 0039 trips mps Multi-FunctionMToloexoSlerviceGrade Multi-Function Herramienta and repairmen. It cuts screws, bolts, strips and 64016-0039 measures wire, and crimps terminals. The sturdy construction and comfortable, Cuts, Strips and Crimps anti-slip handle grips make ServiceGrade Multi-Function Wire Tool the perfect companion for low-volume field repairs. AWG ed and lated al, s ’s 10-22 AWG Tool Terminal, and QD’s Cuts a variety of screw sizes 8-32, 10-24, 10-32, 6-32, 4-40 Strips 10-22 AWG wire Crimps 10-22 AWG, insulated and non-insulated terminals Knife blade easily cuts wires Stripping holes can be used to measure wire gauge 6644001166-0-040239 64016-C0Cr0uim4t2sp,sStrips Crimp1sa4n-2d2CArWimGps Small handle spread - ideal for all users Compact and portable, only 9" long 14-22 MA1W0a-leG22aAndWG Male aFIennmdsualaeted and FemalFeUunllyinsulated Fully InTesurmlaitneadl, InsulaQtSeupdiclikces Make sure work area is clean and dry and wear approved eye protection. Instructions for Stripping Wires Select proper wire gauge and strip length for application. Open handles, place wire in proper stripping hole with the desired strip length, squeeze handles, and pull insulation off of end of wire. QuickDainscdoQnDne’scts Disconnects Instructions for Cutting Wires Select proper wire gauge, open handles, place on cutting blade and squeeze handles until wire is cut. Instructions for Cutting Screws and Bolts Select proper bolt or screw, open handles, thread into proper hole to desired cut length add for tool thickness , and squeeze handles to snap bolt or screw. Instructions for Crimping Select appropriate Molex terminal and verify that wire gauge and strip length are within specifications. Strip wire to specified length. Place terminal on open jaws of tool in correct die. Squeeze tool slightly to hold terminal or connector. Place stripped wire into terminal, making sure it sits parallel inside terminal and wire brush is fully inserted. Hold wire steady in place with one hand, ensuring wire remains seated in terminal until fully crimped. Gently squeeze tool until fully crimped. Cautions Manual hand tools are intended for low-volume field repairs and should only be used for the terminals and wire gauges specified. Tool is NOT intended for high-volume production, and constant, repetitive use can cause hand injury. Do not work on live circuits - tool handles are not insulated and do not protect against electrical shock. Restrictions Termination crimp quality is dependent on the conductor profile choice and skill of the operator. Customers should independently verify that intended termination meets quality and performance needs. Not all terminal, wire and profile combinations will provide minimum pull force requirements, or provide an acceptable crimp form. Molex makes no warranties, express or implied, regarding the performance or reliability of the crimp, or the appropriateness of the tool application. Molex does not certify or repair hand tools. Visit and download the Molex Quality Crimping Handbook for additional information on crimping and pull force testing. Made in Taiwan Hecho en Multi-Function Tool Herramienta Para Uso Múltiple ServiceGrade La Herramienta Para Uso Múltiple Molex Molex ServiceGrade Multi-Function

PDF Datasheet Preview

64016-0039
64016-0039
rviceGrade

ServiceSeGrvirceaGdraede
-Function Tool mienta Para Uso Múltiple
0039 trips mps

Multi-FunctionMToloexoSlerviceGrade Multi-Function

Herramienta and
repairmen. It cuts screws, bolts, strips and
64016-0039
measures wire, and crimps terminals. The sturdy construction and comfortable,

Cuts, Strips and Crimps
anti-slip handle grips make ServiceGrade Multi-Function Wire Tool the perfect companion for low-volume field repairs.

AWG ed and lated al, s ’s
10-22 AWG

Tool Terminal,
and QD’s

Cuts a variety of screw sizes 8-32, 10-24, 10-32, 6-32, 4-40

Strips 10-22 AWG wire

Crimps 10-22 AWG, insulated and non-insulated terminals

Knife blade easily cuts wires

Stripping holes can be used to measure wire gauge
6644001166-0-040239 64016-C0Cr0uim4t2sp,sStrips Crimp1sa4n-2d2CArWimGps

Small handle spread - ideal for all users

Compact and portable, only 9" long
14-22 MA1W0a-leG22aAndWG Male aFIennmdsualaeted and FemalFeUunllyinsulated Fully InTesurmlaitneadl, InsulaQtSeupdiclikces

Make sure work area is clean and dry and wear approved eye protection.

Instructions for Stripping Wires Select proper wire gauge and strip length for application. Open handles, place wire in proper stripping hole with the desired strip length, squeeze handles, and pull insulation off of end of wire.

QuickDainscdoQnDne’scts Disconnects

Instructions for Cutting Wires Select proper wire gauge, open handles, place on cutting blade and squeeze handles until wire is cut.

Instructions for Cutting Screws and Bolts Select proper bolt or screw, open handles, thread into proper hole to desired cut length add for tool thickness , and squeeze handles to snap bolt or screw.

Instructions for Crimping Select appropriate Molex terminal and verify that wire gauge and strip length are within specifications. Strip wire to specified length. Place terminal on open jaws of tool in correct die. Squeeze tool slightly to hold terminal or connector. Place stripped wire into terminal, making sure it sits parallel inside terminal and wire brush is fully inserted. Hold wire steady in place with one hand, ensuring wire remains seated in terminal until fully crimped. Gently squeeze tool until fully crimped.

Cautions Manual hand tools are intended for low-volume field repairs and should only be used for the terminals and wire gauges specified. Tool is NOT intended for high-volume production, and constant, repetitive use can cause hand injury. Do not work on live circuits - tool handles are not insulated and do not protect against electrical shock.

Restrictions Termination crimp quality is dependent on the conductor profile choice and skill of the operator. Customers should independently verify that intended termination meets quality and performance needs. Not all terminal, wire and profile combinations will provide minimum pull force requirements, or provide an acceptable crimp form. Molex makes no warranties, express or implied, regarding the performance or reliability of the crimp, or the appropriateness of the tool application. Molex does not certify or repair hand tools.

Visit and download the Molex Quality Crimping Handbook for additional information on crimping and pull force testing.

Made in Taiwan

Hecho en

Multi-Function Tool Herramienta Para Uso Múltiple

ServiceGrade

La Herramienta Para Uso Múltiple Molex

Molex ServiceGrade Multi-Function

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 640160042 Datasheet file may be downloaded here without warranties.

Datasheet ID: 640160042 649683