76650-0043

76650-0043 Datasheet

Datasheet for 76650-0043

Part	Datasheet
76650-0043	76650-0043 (pdf)

PDF Datasheet Preview
1801 Morgan Street Rockford, Illinois 61102 800-435-2931 Datasheet for 76650-0043 General Information Part Number: 76650-0043 Manufacturer: Molex / Waldom Title Description: Solderless Terminal Kit Assorted PVC Insulated Quick Disconnect, Ring, Spade, Butt Splice and Multi-Lock Terminals. Nylon Fully Insulated Quick Disconnect and Nylon Closed-End Terminals, with Crimp Tool Product Family Solderless Terminals Certificates: Molex Parts within this kit - EU RoHS Compliant, UL and CSA Country of Origin Kit assembled in U.S.A. Specifications Design Configuration: Wire-to-Wire and Wire-to-Board / Solderless Terminals Size s : # 6, # 10, 1/4" and 3/8" Insulation: PVC and Nylon Current Rating Per Proper Wire Specification Voltage: Per Proper Wire Specification Wire size: 22-18 , 22-14 , 16-14 and 12-10 Product Highlights Quick disconnects allow for quickly connecting or disconnecting a terminal. The front end of the terminal has a female-type receptacle which allows the terminal to slide onto and off of a male blade. Spades have the open tongue end used for rapid insertion on the mounting screw. The spade is usually used on free standing studs. Closed-end connectors are used in a variety of situations to "pigtail" or tie together 2 or more wires. Butt Splices allow two stripped wires to be inserted into each end and "butt" in the center, with the crimp securing both wires together. For additional Molex / Waldom Design and Solution kits please go to Page 1 of 4 1801 Morgan Street Rockford, Illinois 61102 800-435-2931 Datasheet for 76650-0043 • Color-coded insulator allows easy identification of terminal size and wire gauge. • A wire stop stamped into the crimp barrel prevents insertion of over-stripped wires. • Terminal's funnel entrance is designed for increased crimping rates by speeding wire delivery into the crimp section and eliminating wire strand fold back. • The spade's open tongue end is for rapid insertion on the mounting screw / stud • The basic ring tongue type is the safest and most reliable because it cannot be disconnected unless the screw is completely removed. • MRO Maintenance Repair and Operations • Consumer applications • Power applications • Motor applications • Powertrains • Transportation • Construction / Mining • Energy / Power • Production Equipment • Instrumentation • Environmental Equipment and Controls • Blower Motors Bill of Materials for Part No. 76650-0043 Country Molex Part No. of Origin 19004-0005 USA Fully Insulated Male Quick Disconnects, 16-14 AWG 19005-0005

PDF Datasheet Preview

1801 Morgan Street Rockford, Illinois 61102 800-435-2931

Datasheet for 76650-0043

General Information

Part Number:
76650-0043

Manufacturer:

Molex / Waldom

Title Description:

Solderless Terminal Kit Assorted PVC Insulated Quick Disconnect, Ring, Spade, Butt Splice and Multi-Lock Terminals. Nylon Fully Insulated Quick Disconnect and Nylon Closed-End Terminals, with Crimp Tool

Product Family Solderless Terminals

Certificates:

Molex Parts within this kit - EU RoHS Compliant, UL and CSA

Country of Origin Kit assembled in U.S.A.

Specifications

Design Configuration:

Wire-to-Wire and Wire-to-Board / Solderless Terminals

Size s :
# 6, # 10, 1/4" and 3/8"

Insulation:

PVC and Nylon

Current Rating Per Proper Wire Specification

Voltage:

Per Proper Wire Specification

Wire size:
22-18 , 22-14 , 16-14 and 12-10

Product Highlights

Quick disconnects allow for quickly connecting or disconnecting a terminal. The front end of the terminal has a female-type receptacle which allows the terminal to slide onto and off of a male blade. Spades have the open tongue end used for rapid insertion on the mounting screw. The spade is usually used on free standing studs. Closed-end connectors are used in a variety of situations to "pigtail" or tie together 2 or more wires. Butt Splices allow two stripped wires to be inserted into each end and "butt" in the center, with the crimp securing both wires together.

For additional Molex / Waldom Design and Solution kits please go to Page 1 of 4
1801 Morgan Street Rockford, Illinois 61102 800-435-2931

Datasheet for 76650-0043
• Color-coded insulator allows easy identification of terminal size and wire gauge.
• A wire stop stamped into the crimp barrel prevents insertion of over-stripped wires.
• Terminal's funnel entrance is designed for increased crimping rates by speeding wire delivery into the crimp section and eliminating wire strand fold back.
• The spade's open tongue end is for rapid insertion on the mounting screw / stud
• The basic ring tongue type is the safest and most reliable because it cannot be disconnected unless the screw is completely removed.
• MRO Maintenance Repair and Operations
• Consumer applications
• Power applications
• Motor applications
• Powertrains
• Transportation
• Construction / Mining
• Energy / Power
• Production Equipment
• Instrumentation
• Environmental Equipment and Controls
• Blower Motors

Bill of Materials for Part No. 76650-0043

Country Molex Part No. of Origin
19004-0005

USA Fully Insulated Male Quick Disconnects, 16-14 AWG
19005-0005

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 76650-0043 Datasheet file may be downloaded here without warranties.

Datasheet ID: 76650-0043 649727