3360-3-14-15-00-00-08-0

3360-3-14-15-00-00-08-0 Datasheet

Product Number 3360-3-14-15-00-00-08-0

Part	Datasheet
3360-3-14-15-00-00-08-0	3360-3-14-15-00-00-08-0 (pdf)

PDF Datasheet Preview
Product Number 3360-3-14-15-00-00-08-0 Description 3360 - Jumper Pin Packaging: Packaged in Bulk Mill-Max Part Number 3360-3-14-15-00-00-08-0 Shell Plating 10 u" Gold over Nickel Contact Plating 00 SHELL MATERIAL BRASS ALLOY 360 per ASTM B 16, or 385 per ASTM B455 Properties of BRASS ALLOY 360 ASTM B 16: Chemical composition Cu 63% max , Pb max †, Fe max , Zn remainder Temper as machined H02/H04 Yield Strength 25-45 ksi Tensile strength 57-80 ksi Hardness as machined 80-90 Rockwell B Electrical conductivity 26% IACS* Melting point 1000°C/840°C liquidus/solidus Properties of BRASS ALLOY 385 ASTM B 455: Chemical composition Cu 60% max , Pb max †, Fe max , Zn remainder Temper as machined H02/H04 Yield Strength 16 ksi min Tensile strength 48 ksi min Hardness as machined 80-90 Rockwell B Electrical conductivity 28% IACS* Melting point 1000°C/840°C liquidus/solidus After machining, brass parts are often annealed softened for subsequent bending, swaging or crimping. A partial anneal down to 60±10 RB is recommended for 90° bends, a full anneal down to 35±15 RB is recommended for pins or terminals that are swaged riveted to a circuit board or crimped to a wire. †RoHS-2 directive 2011/65/EU, exemption 6c allows up to 4% lead as an alloy agent in copper. *International Annealed Copper Standard, i.e. as a % of pure copper. Mill-Max Mfg. Corp. Datasheet Last Modified 10/26/2017 Certificate of Compliance: This is to Certify that the product described above is manufactured to Mill-Max quality standards in accordance with all applicable specifications and drawing. Mill-Max certifies this product to be free from defects of materials and workmanship. This Certificate of Compliance covers the following requirements: Dimensional all features verified to be within tolerances described on the applicable drawing . Raw Material materials and properties verified to be as described on the applicable drawing . Plating platings as required, thickness verified, and performance including solderability per mil-standard . Performance insertion extraction or other force requirements as described on the applicable drawing . RoHS Compliance Statement for the restriction of lead, mercury, cadmium and hexavalent chromium PBB, PBDE, including Octa-BDE, Penta-BDE, Deca -BDE, in electronic equipment and use of PFOA and PFOS in metal plating processes. Reference: Directive 2002/95/EC of the European Parliament and of the Council of January 27 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Directive 2003/11/EC which amends Council Directive 76/769/EC to include pentabromodiphenyl ether and octabromodiphenyl ether. Directive 2005/618/EC Commission decision of 18 August 2005 amending Directive 2002/95/EC. Establishes threshold limits for Lead, Mercury, Cadmium, Hexavalent Chromium, PBB, and PBDE. Judgment of the Court Grand Chamber 1 April 2008, Directive 2002/95/EC-Electrical and electronic equipment Decabromodiphenyl ether Deca-BDE Actions for annulment of exemption. EU Directive 2006/122/EC of the European Parliament and of the Council of 12 December 2006, amending Council Directive 76/769/EEC on the restriction of Perfluorooctanoic Acid PFOA and Perfluorooctane Sulfanates PFOS used during metal plating processes. In reference to the directives described above, MILL-MAX Mfg.Corp. declares that lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, including pentabromodiphenyl ether, octabromodiphenyl ether, decabromodiphenyl ether, Perfluorooctanoic Acid, and Perfluorooctane Sulfanates are not intentionally added to the raw material or processes used for our certified RoHS compliant products except where described and allowed under item 6 of the annex Applications where lead mercury, cadmium, and hexavalent chromium, which are exempted from the requirements of Article 4 1 of reference No warranty, liability of indemnification is expressed or implied with this information. Compliance Statement for Registration, Evaluation, Authorization and Restriction of Chemicals REACH Reference: Regulation EC No 1907/2006 of the European Parliament and of the Council of 18 December 2006, concerning the Registration, Evaluation, Authorization and Restriction of Chemicals REACH ECHA, Candidate list of Substances of Very High Concern SVHC Reference: Compliance Statement for DRC Conflict Free products. Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502, reporting requirements for users of conflict minerals. are Columbite-tantalite coltan , cassiterite, gold, wolframite, or their derivatives or any other mineral or its derivatives determined by the Secretary of State to be financing conflict in the Democratic Republic of the Congo DRC or an adjoining country. Metals derived from these minerals are tin, tantalum, tungsten, and gold. By this definition, the only minerals of concern that may be found in Mill-Max products are tin and gold. Mill-Max Mfg.Corp. hereby certifies that its products are manufactured with tin and gold that is derived from material that is considered DRC Conflict Free. Mill-Max provides this assurance as a result of a due diligence process that includes traceability to the source and in some cases the identification of recycled and scrap materials included in the subject material. Mill-Max Mfg. Corp. Datasheet Last Modified 10/26/2017

PDF Datasheet Preview

Product Number 3360-3-14-15-00-00-08-0

Description 3360 - Jumper Pin Packaging:

Packaged in Bulk

Mill-Max Part

Number
3360-3-14-15-00-00-08-0

Shell Plating 10 u" Gold over Nickel

Contact Plating 00

SHELL MATERIAL BRASS ALLOY 360 per ASTM B 16, or 385 per ASTM B455

Properties of BRASS ALLOY 360 ASTM B 16:

Chemical composition Cu 63% max , Pb max †, Fe max , Zn remainder Temper as machined H02/H04 Yield Strength 25-45 ksi Tensile strength 57-80 ksi Hardness as machined 80-90 Rockwell B Electrical conductivity 26% IACS* Melting point 1000°C/840°C liquidus/solidus

Properties of BRASS ALLOY 385 ASTM B 455:

Chemical composition Cu 60% max , Pb max †, Fe max , Zn remainder Temper as machined H02/H04 Yield Strength 16 ksi min Tensile strength 48 ksi min Hardness as machined 80-90 Rockwell B Electrical conductivity 28% IACS* Melting point 1000°C/840°C liquidus/solidus

After machining, brass parts are often annealed softened for subsequent bending, swaging or crimping. A partial anneal down to 60±10 RB is recommended for 90° bends, a full anneal down to 35±15 RB is recommended for pins or terminals that are swaged riveted to a circuit board or crimped to a wire.
†RoHS-2 directive 2011/65/EU, exemption 6c allows up to 4% lead as an alloy agent in copper.
*International Annealed Copper Standard, i.e. as a % of pure copper.

Mill-Max Mfg. Corp. Datasheet Last Modified 10/26/2017

Certificate of Compliance:

This is to Certify that the product described above is manufactured to Mill-Max quality standards in accordance with all applicable specifications and drawing. Mill-Max certifies this product to be free from defects of materials and workmanship.

This Certificate of Compliance covers the following requirements:

Dimensional all features verified to be within tolerances described on the applicable drawing . Raw Material materials and properties verified to be as described on the applicable drawing . Plating platings as required, thickness verified, and performance including solderability per mil-standard . Performance insertion extraction or other force requirements as described on the applicable drawing .

RoHS Compliance Statement for the restriction of lead, mercury, cadmium and hexavalent chromium PBB, PBDE, including Octa-BDE, Penta-BDE, Deca -BDE, in electronic equipment and use of PFOA and PFOS in metal plating processes.

Reference:

Directive 2002/95/EC of the European Parliament and of the Council of January 27 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Directive 2003/11/EC which amends Council Directive 76/769/EC to include pentabromodiphenyl ether and octabromodiphenyl ether.

Directive 2005/618/EC Commission decision of 18 August 2005 amending Directive 2002/95/EC. Establishes threshold limits for Lead, Mercury, Cadmium, Hexavalent Chromium, PBB, and PBDE.

Judgment of the Court Grand Chamber 1 April 2008, Directive 2002/95/EC-Electrical and electronic equipment Decabromodiphenyl ether Deca-BDE Actions for annulment of exemption.

EU Directive 2006/122/EC of the European Parliament and of the Council of 12 December 2006, amending Council Directive 76/769/EEC on the restriction of Perfluorooctanoic Acid PFOA and Perfluorooctane Sulfanates PFOS used during metal plating processes.

In reference to the directives described above, MILL-MAX Mfg.Corp. declares that lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, including pentabromodiphenyl ether, octabromodiphenyl ether, decabromodiphenyl ether, Perfluorooctanoic Acid, and Perfluorooctane Sulfanates are not intentionally added to the raw material or processes used for our certified RoHS compliant products except where described and allowed under item 6 of the annex Applications where lead mercury, cadmium, and hexavalent chromium, which are exempted from the requirements of Article 4 1 of reference No warranty, liability of indemnification is expressed or implied with this information.

Compliance Statement for Registration, Evaluation, Authorization and Restriction of Chemicals REACH

Reference:

Regulation EC No 1907/2006 of the European Parliament and of the Council of 18 December 2006, concerning the Registration, Evaluation, Authorization and Restriction of Chemicals REACH

ECHA, Candidate list of Substances of Very High Concern SVHC

Reference:

Compliance Statement for DRC Conflict Free products.

Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502, reporting requirements for users of conflict minerals.
are Columbite-tantalite coltan , cassiterite, gold, wolframite, or their derivatives or any other mineral or its derivatives determined by the Secretary of State to be financing conflict in the Democratic Republic of the Congo DRC or an adjoining country. Metals derived from these minerals are tin, tantalum, tungsten, and gold. By this definition, the only minerals of concern that may be found in Mill-Max products are tin and gold.

Mill-Max Mfg.Corp. hereby certifies that its products are manufactured with tin and gold that is derived from material that is considered DRC Conflict Free. Mill-Max provides this assurance as a result of a due diligence process that includes traceability to the source and in some cases the identification of recycled and scrap materials included in the subject material.

Mill-Max Mfg. Corp. Datasheet Last Modified 10/26/2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3360-3-14-15-00-00-08-0 Datasheet file may be downloaded here without warranties.

Datasheet ID: 3360-3-14-15-00-00-08-0 649514