MIKROE-2564

MIKROE-2564 Datasheet

PID MIKROE-2564

Part	Datasheet
MIKROE-2564	MIKROE-2564 (pdf)

PDF Datasheet Preview
Keylock click PID MIKROE-2564 Keylock click carries a processed sealed key lock mechanism that can be set in three different ositions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the mikroBUS line. The key can be removed from the lock in any of the three positions. The package contains two keys and one protective cap. Keylock features The contact mechanism provides unequaled logic-level reliability and smoother, positive detent actuation. Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting. Specifications Type Joystick Use the three different positions of the mechanism to turn applications on or off, for home security applications, for industrial equipment, etc. modules Keylock switch with 3 positions Interface GPIO Input Voltage 3.3V or 5V Click board size S x mm Pinout diagram This table shows how the pinout on Keylock click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes Notes Output position 1 PWM 16 NC 2 RST NC 3 CS NC 4 SCK NC 5 MISO SCL NC 6 MOSI SDA Power supply +3.3V 7 3.3V Ground GND 8 GND Output position 2 Output position 3 Power supply Ground Programming Code examples for Keylock click, written for MikroElektronika hardware and compilers are available on Libstock. Code snippet This is a simple example of how Keylock click works, depending on the state of the Keylock click the appropriate position will be detected. 01 uint8_t state;

PDF Datasheet Preview

Keylock click

PID MIKROE-2564

Keylock click carries a processed sealed key lock mechanism that can be set in three different ositions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the mikroBUS line.

The key can be removed from the lock in any of the three positions. The package contains two keys and one protective cap.

Keylock features

The contact mechanism provides unequaled logic-level reliability and smoother, positive detent actuation.

Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting.

Specifications

Type

Joystick

Use the three different positions of the mechanism to turn applications on or off, for home security applications, for industrial equipment, etc.
modules

Keylock switch with 3 positions

Interface

GPIO

Input Voltage 3.3V or 5V

Click board size S x mm

Pinout diagram

This table shows how the pinout on Keylock click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns .

Notes

Notes

Output position 1

PWM 16

NC 2 RST

NC 3 CS

NC 4 SCK

NC 5 MISO SCL

NC 6 MOSI SDA

Power supply
+3.3V 7 3.3V

Ground

GND 8 GND

Output position 2

Output position 3

Power supply

Ground

Programming

Code examples for Keylock click, written for MikroElektronika hardware and compilers are available on Libstock.

Code snippet

This is a simple example of how Keylock click works, depending on the state of the Keylock click the appropriate position will be detected.
01 uint8_t state;

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2564 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-2564 649378