MIKROE-2521
MIKROE-2521 Datasheet
PID MIKROE-2521
| Part | Datasheet |
|---|---|
MIKROE-2521 |
MIKROE-2521 (pdf) |
| PDF Datasheet Preview |
|---|
| EnOcean 2 click PID MIKROE-2521 EnOcean 2 click carries the TCM 515Z transceiver, based on the GHz IEEE radio standard. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface. This low-powered wireless module is intended for use together with EnOcean’s range of energy harvesting modules. These are miniaturized converters that harness energy from motion, light or temperature differences, that come in the form of self-powered, battery-free wireless switches, sensors and actuators. TCM 515Z TCM 515Z enables the realization of line-powered actuators, controllers, and gateways communicating based on the GHz IEEE radio standard. It provides a transparent radio link between EnOcean GHz devices and an external host connected via the standardized ESP3 interface EnOcean Serial Protocol V3 . TCM 515Z works on a GHz frequency for ZigBee systems. EnOcean Serial Protocol ESP3 is a Point-to-Point protocol with a packet data structure. The maximum size of transferred data is 65535 bytes. Compared with ESP2.0, that has the maximum of 25 bytes, it’s a considerable improvement. Onboard antenna TCM 515Z receives and transmits data based on a whip antenna connected to its ANTENNA input. Key features • TCM 515Z module o Frequency GHz ZigBee systems o Receiver sensitivity typ, at 25°C dBm o Transmit power typ, at 25°C +2 dBm o Default radio channel IEEE radio channel 11 • UART interface • 3.3V power supply SPECIFICATION Product Type RF 2.4GHz Applications Incorporate battery-free wireless energy harvesting modules into your designs On-board modules TCM 515Z Key Features the GHz IEEE radio standard, EnOcean Serial Protocol 3.3V power supply, UART interface Key Benefits Communicates with battery-free switches, sensors and actuators. Onboard chip antenna Interface UART Power Supply 3.3V Compatibility mikroBUS Click board size L x mm Pinout diagram This table shows how the pinout on EnOcean 2 click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes mikroBUStm Notes Not connected NC 1 AN PWM 16 NC Not connected Not connected NC 2 RST INT 15 NC Not connected Not connected NC 3 CS TX 14 UART_TX UART transmit Not connected NC 4 SCK RX 13 UART_RX UART receive Not connected NC 5 MISO SCL 12 NC Not connected Not connected NC 6 MOSI SDA 11 NC Not connected Power supply +3.3V 7 3.3V 5V 10 NC Not connected Ground GND 8 GND 9 GND Ground Jumpers and settings Designator Name Default Position Default Option TURBO MODE Right |
| More datasheets: PF3000230 | PF7000230 | PF6000230 | PF5000230 | PF7000 | TX36/23/15-4C65 | DEMN-9S-N-K126 | MDM-15PH003K | DCM37SZA197 | DBM-5W5S-A197 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2521 Datasheet file may be downloaded here without warranties.