PID MIKROE-2439 Weight 33 g Condition New product GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with the target MCU over UART interface, and the following mikroBUS pins AN, RST, PWM, INT.
Part | Datasheet |
---|---|
![]() |
MIKROE-2439 (pdf) |
PDF Datasheet Preview |
---|
GSM/GNSS click PID MIKROE-2439 Weight 33 g Condition New product GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with the target MCU over UART interface, and the following mikroBUS pins AN, RST, PWM, INT. Table of contents Quectel’s MC60 module Positioning EASY technology GPS and GLONASS Application Key features GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with the target MCU over UART interface, and the following mikroBUS pins AN, RST, PWM, INT. When connected to a GPS antenna, it can receive GPS coordinates, time, and other information from orbiting satellites. The click can be used for all GSM functions calls, messages SMS, MMS , mobile internet. GSM/GNSS click has an onboard MicroSD card socket, micro SIM card socket, a Bluetooth antenna the MC60 module supports Bluetooth and additional pins for connecting speakers and a microphone. Quectel’s MC60 module MC60 is a quad-band full-featured GSM/GPRS module using LCC castellation package. With an extensive set of internet protocols TCP, UDP, PPP, and SSL* , it has integrated GNSS technology for satellite navigation. The module can balance between positioning accuracy and power consumption according to the environmental and motion conditions. The typical power consumption is around 2.8mA. Positioning EASY technology EASY is the abbreviation of Embedded Assist System for quick positioning. With EASY technology, MC60’s GNSS engine can automatically calculate and predict orbits using the ephemeris data up to 3 days when the power is on, and then save that information into the memory. The GNSS engine can use this information for later positioning, if there is not enough information from the satellites. GPS and GLONASS GNSS stands for Global Navigation Satellite System, an umbrella term that describes both the United States GPS and the Russian GLONASS global positioning systems. GLONASS is an acronym for Globalnaya Navigatsionnaya Sputnikovaya Sistema Global Navigation Satellite System . GPS currently has 33 satellites in orbit, and GLONASS has This two-constellation system is particularly suitable for urban areas with high-rise buildings and complex environments. GLONASS is suited for usage in high latitudes north or south , where getting a GPS signal can be difficult. Application Asset tracking, for navigation devices based on GPS and GLONASS, road navigation devices, public transport, wearable devices, etc. Key features • MC60 module o Multi navigation constellation GPS/GLONASS/QZSS o GNSS receiver channels 99 acquisition/33 tracking channels o GSM 850/900/1800/1900MHz o Support Bluetooth V3.0 SPP & profiles • GSM SMA antenna connector • GNSS SMA antenna connector • Bluetooth antenna • Interface UART • 3.3V or 5V power supply SPECIFICATION Product Type GSM - GPS Asset tracking, for navigation devices based on GPS and GLONASS, road navigation devices, public transport, wearable devices, etc. Key Features MC60 quad-band module, GPS/GNSS location tracking, UART interface, 3.3V or 5V power supply Key Benefits GPS, GNSS, GSM, and Bluetooth in one click Interface UART Power Supply 3.3V or 5V Compatibility mikroBUS Click board size L x mm Pinout diagram This table shows how the pinout on GSM/GNSS click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes mikroBUStm Notes SD card detect DET 1 AN PWM 16 RING indicator Reset RST 2 RST INT 15 CTS Clear to send |
More datasheets: SD3443-001 | CG41.0SM | CG43.0SM | CG41.8SM | CG42.7SM | CG42.5SM | CG40.8SM | CG42.0SM | CG41.2SM | DCM13W6PNMK52 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2439 Datasheet file may be downloaded here without warranties.