MIKROE-2239

MIKROE-2239 Datasheet

Matrix RGB click is a mikroBUS add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED matrices.

Part	Datasheet
MIKROE-2239	MIKROE-2239 (pdf)

PDF Datasheet Preview
Matrix RGB click Matrix RGB click is a mikroBUS add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED matrices. The board has a 16 wire IDC connector for connecting to a single 16x32 LED panel however, the firmware inside the FT900x chip can drive more than one panel. Multiple panels can be connected to each other into a daisy-chain configuration see the video . Matrix RGB click communicates with the target MCU through the SPI interface. It uses a 3.3V power supply only. Complete with Matrix RGB click, a single 32x32 RGB LED matrix panel consisting of two 16x32 matrices joined together , and a power supply unit are available to order. Alternatively, panels and power supplies can be purchased separately. Technical Specifications Driving up to 16 16x32 RGB LED panels more than 32 is possible, but flickering may occurr . Key features Can drive up to 16 panels of 16x32 RGB LEDs Removes the load from the host MCU Microcontroller can be accessed through separate IDC connector Ready-to-use examples save development time Don't forget However powerful, Matrix RGB click is only a driver board, and you need to have one or more RGB panels and a power adapter to see the output. Make sure you add them to your cart along side with the click. MIKROE-2239 Matrix RGB click Copyright 1998 - MikroElektronika d.o.o.

PDF Datasheet Preview

Matrix RGB click

Matrix RGB click is a mikroBUS add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED matrices.

The board has a 16 wire IDC connector for connecting to a single 16x32 LED panel however, the firmware inside the FT900x chip can drive more than one panel.

Multiple panels can be connected to each other into a daisy-chain configuration see the video . Matrix RGB click communicates with the target MCU through the SPI interface. It uses a 3.3V power supply only.

Complete with Matrix RGB click, a single 32x32 RGB LED matrix panel consisting of two 16x32 matrices joined together , and a power supply unit are available to order.

Alternatively, panels and power supplies can be purchased separately.

Technical Specifications

Driving up to 16 16x32 RGB LED panels more than 32 is possible, but flickering may occurr .

Key features

Can drive up to 16 panels of 16x32 RGB LEDs Removes the load from the host MCU Microcontroller can be accessed through separate IDC connector Ready-to-use examples save development time

Don't forget

However powerful, Matrix RGB click is only a driver board, and you need to have one or more RGB panels and a power adapter to see the output. Make sure you add them to your cart along side with the click.

MIKROE-2239 Matrix RGB click

Copyright 1998 - MikroElektronika d.o.o.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2239 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-2239 649310