USB50405E3/TR7

USB50405E3/TR7 Datasheet

USB50403 USB50424

Part	Datasheet
USB50405E3/TR7	USB50405E3/TR7 (pdf)

Related Parts	Information
USB50424E3/TR7	USB50424E3/TR7
USB50415E3/TR7	USB50415E3/TR7
USB50412E3/TR7	USB50412E3/TR7
USB50403E3/TR7	USB50403E3/TR7
USB50812/TR13	USB50812/TR13

PDF Datasheet Preview
USB50403 USB50424 Available Unidirectional TVSarray This USB50403 USB50424 Transient Voltage Suppressor TVS family is packaged in a SOT-143 configuration giving protection to 1 unidirectional data or interface line. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC electrical fast transients EFT per IEC 61000-4-4, and effects of secondary effects of lightning. It is also available in RoHS compliant versions. These TVS arrays have a peak power rating of 500 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS, DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and Universal Serial Bus USB and I/O transceivers. SOT-143 Package Important For the latest information, visit our website • Protects 1 unidirectional line. • Surge protection per IEC 61000-4-2 and IEC • Provides electrically isolated protection. • UL 94V-0 flammability classification. • Ultra low capacitance, 3 pF per line pair. • Ultra low leakage. • RoHS compliant versions available. Also available in: Bidirectional SOT-143 surface mount USB50403C USB50424C APPLICATIONS / BENEFITS • EIA-RS485 data rates 5 Mbs • 10 Base T Ethernet. • USB data rate 900 Mbs MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Peak Pulse Power 8/20 µs see Figure 1 Impulse Repetition Rate Capacitance f = 1 MHz 0 V Solder Temperature 10 s Symbol TJ and TSTG P PP df C T SP Value -55 to +150 500 < 3 260 Unit ºC W % pF oC MSC Lawrence 6 Lake Street, Lawrence, MA 01841 Tel 1-800-446-1158 or 978 620-2600 Fax 978 689-0803 MSC Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel +353 0 65 6840044 Fax +353 0 65 6822298 Website: 2013 Microsemi Corporation USB50403 USB50424 MECHANICAL and PACKAGING • CASE Molded SOT-143 surface mount. • TERMINALS Tin-lead or RoHS compliant annealed matte-tin plating. • MARKING See electrical characteristics table. • POLARITY Pin #1 defined by dot on top of package. • TAPE & REEL option Per EIA standard 481-1-A. Consult factory for quantities. • WEIGHT Approximately grams. • See Package Dimensions on last page. Rated for USB applications 500W PPP Rating 4 Pin Package PART NOMENCLATURE USB 5 04 03 e3 RoHS Compliance e3 = RoHS Compliant Blank = non-RoHS Compliant Rated Standoff Voltage VWM Symbol VWM V BR VC ID C SYMBOLS & DEFINITIONS Definition Stand Off Voltage Maximum dc voltage that can be applied over the operating temperature range. Vwm must be selected to be equal or be greater than the operating voltage of the line to be protected. Minimum Breakdown Voltage The minimum voltage the device will exhibit at a specified current. Clamping Voltage Maximum clamping voltage across the TVS device when subjected to a given current at a pulse time of 20 µs. Standby Current Leakage current at VWM. Capacitance of the TVS as defined 0 volts at a frequency of 1 MHz and stated in picofarads. ELECTRICAL CHARACTERISTICS USB50403 USB50405 USB50412 USB50415 USB50424 DEVICE MARKING* AA AB AC AD AE

PDF Datasheet Preview

USB50403 USB50424

Available

Unidirectional TVSarray

This USB50403 USB50424 Transient Voltage Suppressor TVS family is packaged in a SOT-143 configuration giving protection to 1 unidirectional data or interface line. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC electrical fast transients EFT per IEC 61000-4-4, and effects of secondary effects of lightning. It is also available in RoHS compliant versions. These TVS arrays have a peak power rating of 500 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS, DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and Universal Serial Bus USB and I/O transceivers.

SOT-143 Package

Important For the latest information, visit our website
• Protects 1 unidirectional line.
• Surge protection per IEC 61000-4-2 and IEC
• Provides electrically isolated protection.
• UL 94V-0 flammability classification.
• Ultra low capacitance, 3 pF per line pair.
• Ultra low leakage.
• RoHS compliant versions available.

Also available in:

Bidirectional SOT-143
surface mount USB50403C USB50424C

APPLICATIONS / BENEFITS
• EIA-RS485 data rates 5 Mbs
• 10 Base T Ethernet.
• USB data rate 900 Mbs

MAXIMUM RATINGS

Parameters/Test Conditions Junction and Storage Temperature Peak Pulse Power 8/20 µs see Figure 1 Impulse Repetition Rate Capacitance f = 1 MHz 0 V Solder Temperature 10 s

Symbol TJ and TSTG

P PP df C T SP

Value -55 to +150
500 <
3 260

Unit ºC W % pF oC

MSC Lawrence 6 Lake Street, Lawrence, MA 01841 Tel 1-800-446-1158 or 978 620-2600 Fax 978 689-0803

MSC Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel +353 0 65 6840044 Fax +353 0 65 6822298

Website:
2013 Microsemi Corporation

USB50403 USB50424

MECHANICAL and PACKAGING
• CASE Molded SOT-143 surface mount.
• TERMINALS Tin-lead or RoHS compliant annealed matte-tin plating.
• MARKING See electrical characteristics table.
• POLARITY Pin #1 defined by dot on top of package.
• TAPE & REEL option Per EIA standard 481-1-A. Consult factory for quantities.
• WEIGHT Approximately grams.
• See Package Dimensions on last page.

Rated for USB applications
500W PPP Rating
4 Pin Package

PART NOMENCLATURE

USB 5 04 03 e3

RoHS Compliance e3 = RoHS Compliant Blank = non-RoHS Compliant

Rated Standoff Voltage VWM

Symbol VWM V BR VC ID C

SYMBOLS & DEFINITIONS Definition

Stand Off Voltage Maximum dc voltage that can be applied over the operating temperature range. Vwm must be selected to be equal or be greater than the operating voltage of the line to be protected. Minimum Breakdown Voltage The minimum voltage the device will exhibit at a specified current. Clamping Voltage Maximum clamping voltage across the TVS device when subjected to a given current at a pulse time of 20 µs. Standby Current Leakage current at VWM. Capacitance of the TVS as defined 0 volts at a frequency of 1 MHz and stated in picofarads.

ELECTRICAL CHARACTERISTICS

USB50403 USB50405 USB50412 USB50415 USB50424

DEVICE MARKING*

AA AB AC AD AE

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived USB50405E3/TR7 Datasheet file may be downloaded here without warranties.

Datasheet ID: USB50405E3/TR7 649188