DMPM-DC-KIT
DMPM-DC-KIT Datasheet
DMPM Daughtercard Kit
| Part | Datasheet |
|---|---|
DMPM-DC-KIT |
DMPM-DC-KIT (pdf) |
| PDF Datasheet Preview |
|---|
| System Management Microsemi’s system management solution significantly reduces the cost and complexity of board-level power management by integrating power converter functions including sequencing, trimming, margining, monitoring, and control as well as system management functions such as reset generation, event logging and green power algorithm support. Targeted to the Microsemi customizable system-on-chip cSoC , there is an abundance of uncommitted analog and FPGA resources available to the user, allowing the creation of a true custom solution. SmartFusion MPM JTAG/I2C MPM Config GUI Up to 32 Channels On/Off Management I/F Analog Monitoring Up to 32 Flags Programmable Flags Reset Generation Up to 128 I/Os User Defined I/Os ENABLEx Margin/Trimx VMONx ENABLEx PMBus PowerGoodx 32 Analog CD/CD Converters EN Vout Trim 32 Digital DC/DC Converters SCL SDA ALRT# Vout PG Microsemi’s Mixed Signal Power Manager MPM reference design version further distances itself from the competition by now including support for PMBus based POL converters. No other power management solution seamlessly supports a mix of analog and PMBus based power converters. Now you can sequence, monitor, and manage a mixed set of DC/DC converters, including LDOs, analog style, and the highly efficient PMBus based converters, from a single management device. Key Features • Manage up to 64 DC/DC converters • Full support for analog and digital POL converters • Sequence, monitor, margin, trim converters • Event logging with timestamp • Configurable flag generation • On-chip analog hardware to support trimming/margining • GUI based configuration tool • I2C based management/control interface • On-chip nonvolatile NVRAM for configuration and logging storage • User-available analog channels for current/voltage/temperature monitoring • User-available FPGA gates and I/O pins for custom logic • All design files available for customization • SEU immune SmartFusion cSoC for reliable operation • FG256, FG484, CS288, PQ208, TQ144 packages • Military temperature available • Full reference design hardware available April 2012 2012 Microsemi Corporation System Management Simple MPM Configuration GUI The MPM reference design comes bundled with a GUI to simplify power configuration. The GUI allows designers to configure the power sequence, trimming/margining values, critical threshold voltages, programmable output flags, and event logging. The completed configuration can be downloaded to a SmartFusion device through I2C or JTAG via the PC’s USB port. No FPGA design or tool experience required. DMPM Daughtercard Kit Microsemi’s MPM reference design empowers designers to create their perfect power/system management solution. For more information, visit or contact your local FAE. JP3 JP19 JP2 JP20 Mixed Signal Header JP21 JP22 JP23 Power Switch 9 V Power Supply Jack Zilker Programming Header LEDs D15, D16, D17, D18, D19 Analog Power Supply Regulators RV1, RV2 |
| More datasheets: MRF1.6/5.6-AP-2.5C | MRF1.6/5.6-LR-PC-1 | MRF1.6/5.6-PJ-59U | MRF1.6/5.6-PJ-179U | MRF1.6/5.6-PJ-2.5C | RTV112-85ML | 10041 | SP3050-04HTG | 1850BL15A050E | 77006802 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DMPM-DC-KIT Datasheet file may be downloaded here without warranties.