SMDA05C-5E3/TR13

SMDA05C-5E3/TR13 Datasheet

SMDA03C-5

Part	Datasheet
SMDA05C-5E3/TR13	SMDA05C-5E3/TR13 (pdf)

Related Parts	Information
SMDA24C-5/TR13	SMDA24C-5/TR13
SMDA15C-5/TR13	SMDA15C-5/TR13
SMDA12C-5/TR13	SMDA12C-5/TR13
SMDA05C-5/TR13	SMDA05C-5/TR13
SMDA03C-5/TR13	SMDA03C-5/TR13
SMDA03C-5/TR7	SMDA03C-5/TR7
SMDA24C-5/TR7	SMDA24C-5/TR7
SMDA15C-5/TR7	SMDA15C-5/TR7
SMDA12C-5/TR7	SMDA12C-5/TR7
SMDA05C-5/TR7	SMDA05C-5/TR7
SMDA05C-5E3/TR7	SMDA05C-5E3/TR7
SMDA03C-5E3/TR7	SMDA03C-5E3/TR7
SMDA15C-5E3/TR7	SMDA15C-5E3/TR7
SMDA24C-5E3/TR7	SMDA24C-5E3/TR7
SMDA12C-5E3/TR7	SMDA12C-5E3/TR7
SMDA15C-5	SMDA15C-5
SMDA03C-5	SMDA03C-5
SMDA05C-5	SMDA05C-5
SMDA12C-5	SMDA12C-5
SMDA24C-5	SMDA24C-5
SMDA24C-5E3/TR13	SMDA24C-5E3/TR13
SMDA15C-5E3/TR13	SMDA15C-5E3/TR13
SMDA12C-5E3/TR13	SMDA12C-5E3/TR13
SMDA03C-5E3/TR13	SMDA03C-5E3/TR13

PDF Datasheet Preview
8700 E. Thomas Road Scottsdale, AZ 85251 Tel 480 941-6300 Fax 480 947-1503 SMDA03C-5 thru SMDA24C-5 DESCRIPTION 300 watt This TRANSIENT VOLTAGE SUPPRESSOR TVS array is packaged in a SO-8 configuration giving protection to 5 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC 1000-4-2, electrical fast transients EFT per IEC 1000-4-4 and effects of secondary lighting. TVSarray Series These TVS arrays have a peak power rating of 300 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXXC-5 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. • Protects up to 5 Bidirectional lines • Surge protection Per IEC 1000-4-2, 1000-4-4 • SO-8 Packaging MECHANICAL • Molded SO-8 Surface Mount • Weight grams approximate • Marking Logo, device number, date code • Pin #1 defined by DOT on top of package MAXIMUM RATINGS • Operating Temperatures -550C to +1500C • Storage Temperature -550C to +1500C • Peak Pulse Power 300 Watts 8/20 µsec, Figure 1 • Pulse Repetition Rate: PACKAGING • Tape & Reel EIA Standard 481-1-A • 13 inch reel 2,500, pieces OPTIONAL • Carrier tubes 95 pcs per STANDARD ELECTRICAL CHARACTERISTICS PER LINE 250C Unless otherwise specified DEVICE MARKING STAND OFF VOLTAGE VWM VOLTS MAX BREAKDOWN VOLTAGE VBR mA VOLTS MIN CLAMPING VOLTAGE VC 1 Amp FIGURE 2 VOLTS CLAMPING VOLTAGE VC 5 Amp FIGURE 2 VOLTS LEAKAGE CURRENT ID VWM µA MAX CAPACITANCE f=1 MHz C pF TYP SMDA03C-5 SDL5 SMDA05C-5 SDB5 SMDA12C-5 SDD5 SMDA15C-5

PDF Datasheet Preview

8700 E. Thomas Road Scottsdale, AZ 85251 Tel 480 941-6300 Fax 480 947-1503

SMDA03C-5
thru

SMDA24C-5

DESCRIPTION 300 watt

This TRANSIENT VOLTAGE SUPPRESSOR TVS array is packaged in a SO-8 configuration giving protection to 5 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC 1000-4-2, electrical fast transients EFT per IEC 1000-4-4 and effects of secondary lighting.

TVSarray Series

These TVS arrays have a peak power rating of 300 watts for an 8/20
µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXXC-5 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry.
• Protects up to 5 Bidirectional lines
• Surge protection Per IEC 1000-4-2, 1000-4-4
• SO-8 Packaging

MECHANICAL
• Molded SO-8 Surface Mount
• Weight grams approximate
• Marking Logo, device number, date code
• Pin #1 defined by DOT on top of package

MAXIMUM RATINGS
• Operating Temperatures -550C to +1500C
• Storage Temperature -550C to +1500C
• Peak Pulse Power 300 Watts 8/20 µsec, Figure 1
• Pulse Repetition Rate:

PACKAGING
• Tape & Reel EIA Standard 481-1-A
• 13 inch reel 2,500, pieces OPTIONAL
• Carrier tubes 95 pcs per STANDARD

ELECTRICAL CHARACTERISTICS PER LINE 250C Unless otherwise specified

DEVICE MARKING

STAND OFF

VOLTAGE VWM

VOLTS MAX

BREAKDOWN VOLTAGE VBR mA

VOLTS MIN

CLAMPING VOLTAGE

VC 1 Amp FIGURE 2

VOLTS

CLAMPING VOLTAGE

VC 5 Amp FIGURE 2

VOLTS

LEAKAGE CURRENT

ID VWM
µA MAX

CAPACITANCE f=1 MHz C
pF TYP

SMDA03C-5

SDL5

SMDA05C-5

SDB5

SMDA12C-5

SDD5

SMDA15C-5

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SMDA05C-5E3/TR13 Datasheet file may be downloaded here without warranties.

Datasheet ID: SMDA05C-5E3/TR13 649154