SMDA15C-8E3/TR13
SMDA15C-8E3/TR13 Datasheet
SMDA03C-8
| Part | Datasheet |
|---|---|
SMDA15C-8E3/TR13 |
SMDA15C-8E3/TR13 (pdf) |
| Related Parts | Information |
|---|---|
|
SMDA05C-8E3/TR7 |
SMDA05C-8E3/TR7 |
|
SMDA24C-8E3/TR7 |
SMDA24C-8E3/TR7 |
|
SMDA12C-8E3/TR7 |
SMDA12C-8E3/TR7 |
|
SMDA03C-8E3/TR7 |
SMDA03C-8E3/TR7 |
|
SMDA15C-8E3/TR7 |
SMDA15C-8E3/TR7 |
|
SMDA03C-8/TR7 |
SMDA03C-8/TR7 |
|
SMDA15C-8/TR7 |
SMDA15C-8/TR7 |
|
SMDA24C-8/TR7 |
SMDA24C-8/TR7 |
|
SMDA05C-8/TR7 |
SMDA05C-8/TR7 |
|
SMDA12C-8/TR7 |
SMDA12C-8/TR7 |
|
SMDA03C-8/TR13 |
SMDA03C-8/TR13 |
|
SMDA05C-8/TR13 |
SMDA05C-8/TR13 |
|
SMDA12C-8/TR13 |
SMDA12C-8/TR13 |
|
SMDA15C-8/TR13 |
SMDA15C-8/TR13 |
|
SMDA24C-8/TR13 |
SMDA24C-8/TR13 |
|
SMDA03C-8E3/TR13 |
SMDA03C-8E3/TR13 |
|
SMDA05C-8E3/TR13 |
SMDA05C-8E3/TR13 |
|
SMDA24C-8E3/TR13 |
SMDA24C-8E3/TR13 |
|
SMDA12C-8E3/TR13 |
SMDA12C-8E3/TR13 |
| PDF Datasheet Preview |
|---|
| 8700 E. Thomas Road Scottsdale, AZ 85251 Tel 480 941-6300 Fax 480 947-1503 SMDA03C-8 thru SMDA24C-8 TVSarray Series DESCRIPTION 300 watt This 14 pin 8 line Bi-directional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC 1000-4-2, electrical fast transients EFT per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR TVS Diode Arrays have a peak power of 300 watts for an 8/20 µsec pulse and are designed to protect volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. • Protects up through 24V Components • Protects 8 lines Bi-directional • Provides electrically isolated protection • SO-14 Packaging MECHANICAL • Molded SO-14 Surface Mount • Weight grams approximate • Body Marked with Logo, and device number • Pin #1 defined by DOT on top of package • Encapsulation meets UL 94V-0 MAXIMUM RATINGS • Operating Temperatures -550C to +1500C • Storage Temperature -550C to +1500C • Peak Pulse Power 300 Watts 8/20 µsec, Figure 1 • Pulse Repetition Rate: PACKAGING • Tape & Reel EIA Standard 481-1-A • 13 inch reel 2,500 OPTIONAL • Carrier tubes 55 pcs per STANDARD ELECTRICAL 250C Unless otherwise specified SMDA03C-8 SMDA05C-8 SMDA12C-8 SMDA15C-8 SMDA24C-8 DEVICE MARKING SDL8 SDB8 SDD8 SDF8 SDH8 STAND OFF VOLTAG E VOLTS MAX BREAKDOWN VOLTAGE VBR mA VOLTS MIN 4 CLAMPING VOLTAGE VC 1 Amp FIGURE 2 VOLTS CLAMPING VOLTAGE VC 5 Amp FIGURE 2 VOLTS LEAKAGE CURRENT ID VWM MAX 200 40 CAPACITANCE f=1 MHz C TYP 300 200 75 50 35 TEMPERATURE COEFFICIENT OF VBR mV/°C NOTE Transient Voltage Suppression TVS product is normally selected based on its stand off voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. Application The SMDAXXC-8 product is designed for transient voltage suppression protection of components at the board level. It is an ideal product to be used for protection of I/O Transceivers. MSC0976.PDF |
| More datasheets: SMDA03C-8/TR7 | SMDA15C-8/TR7 | SMDA24C-8/TR7 | SMDA05C-8/TR7 | SMDA12C-8/TR7 | SMDA03C-8/TR13 | SMDA05C-8/TR13 | SMDA12C-8/TR13 | SMDA15C-8/TR13 | SMDA24C-8/TR13 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SMDA15C-8E3/TR13 Datasheet file may be downloaded here without warranties.