SM1603-03C
Part | Datasheet |
---|---|
![]() |
SM1615E3/TR13 (pdf) |
Related Parts | Information |
---|---|
![]() |
SM1612CE3/TR13 |
![]() |
SM1615CE3/TR13 |
![]() |
SM1603CE3/TR13 |
![]() |
SM1605CE3/TR13 |
![]() |
SM1624CE3/TR13 |
![]() |
SM1603/TR13 |
![]() |
SM1612/TR13 |
![]() |
SM1605/TR13 |
![]() |
SM1615/TR13 |
![]() |
SM1624/TR13 |
![]() |
SM1605E3/TR13 |
![]() |
SM1605C/TR13 |
![]() |
SM1603C/TR13 |
![]() |
SM1612C/TR13 |
![]() |
SM1624C/TR13 |
![]() |
SM1615E3 |
![]() |
SM1603E3/TR13 |
![]() |
SM1612E3/TR13 |
![]() |
SM1624E3/TR13 |
![]() |
SM1603C |
![]() |
SM1624C |
![]() |
SM1615C/TR13 |
PDF Datasheet Preview |
---|
8700 E. Thomas Road Scottsdale, AZ 85252 Tel 480 941-6300 Fax 480 947-1503 DESCRIPTION 300 watt This 16 pin 8 line Unidirectional or Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC 1000-42, electrical fast transients EFT per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR TVS Diode Arrays have a peak power of 300 watts for an 8/20 µsec pulse and are designed to protect volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. SM1603-03C thru SM1624-24C TVSarray Series • Protects up through 24V Components • Protects 8 lines Unidirectional or Bidirectional • Provides electrically isolated protection • SO-16 Packaging MECHANICAL • Molded SO-16 Surface Mount • Weight grams approximate • Body Marked with Logo, and device number • Pin #1 defined by DOT on top of package • Encapsulation meets UL 94V-0 MAXIMUM RATINGS • Operating Temperatures -550C to +1500C • Storage Temperature -550C to +1500C • Peak Pulse Power 300 Watts 8/20 µsec, Figure 1 • Pulse Repetition Rate: PACKAGING • Tape & Reel EIA Standard 481-1-A • 13 inch reel 2,500 pieces OPTIONAL • Carrier tubes 48 pcs per STANDARD ELECTRICAL CHARACTERISTICS PER LINE 25°C Unless otherwise specified DEVICE MARKING STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR mA VOLTS CLAMPING VOLTAGE VC 1 Amp FIGURE 2 VOLTS CLAMPING VOLTAGE VC 5 Amp FIGURE2 VOLTS LEAKAGE CURREN T ID VWM CAPACITANCE f=1 MHz C SM1603 SM1603C SM1605 SM1605C SM1612 SM1612C SM1615 SM1615C SM1624 SM1624C Part numbers with a “C” suffix are bidirectional devices TEMPERATURE COEFFICIENT |
More datasheets: SM1624/TR13 | SM1605E3/TR13 | SM1605C/TR13 | SM1603C/TR13 | SM1612C/TR13 | SM1624C/TR13 | SM1615E3 | SM1603E3/TR13 | SM1612E3/TR13 | SM1624E3/TR13 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SM1615E3/TR13 Datasheet file may be downloaded here without warranties.