PD-IM-7448E

PD-IM-7448E Datasheet

PD-IM-7448E/A Evaluation Board - User Guide

Part	Datasheet
PD-IM-7448E	PD-IM-7448E (pdf)

PDF Datasheet Preview
PD-IM-7448E/A Evaluation Board - User Guide PD-IM-7448E/A Evaluation Board User Guide Document Issue Security Status Restricted Date April 2014 PRODUCTION DATA Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time. PD-IM-7448E/A Evaluation Board - User Guide Reference Documents • IEEE 802.3af-2003 Standard, DTE Power via MDI • IEEE802.3at-draft1.0 Standard, DTE Power via MDI • PD69012 Data Sheet, Catalogue Number 06-0069-058 • PD69000 Data Sheet, Catalogue Number 06-0070-058 • Application Note 175 Layout Design Guidelines for PoE Systems, Catalogue Number 06- 0055-080 • Application Note 174 Designing a 48-port Enhanced PoE System 802.3af/802.3at Compliant, UART interface , Catalogue Number 06-0054-080 • Serial Communication Protocol User Guide, Catalogue Number 06-0032-056 • GUI installation User Guide, Catalogue Number 06-0037-056 The above documents can be obtained via Microsemi Customer Support. To access other documents, go to our web site at and under Tech and look up the relevant documents. Copyright 2011 Microsemi Analog Mixed Signal Group 1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308 PD-IM-7448E/A Evaluation Board - User Guide Table of Contents 1 About this Guide 4 Objectives 4 Audience 4 2 Introduction 5 Evaluation Board Ordering Information 5 Evaluation Board Features 5 Evaluation Board Interfaces & Connections 6 Physical 6 3 Physical Description 7 Package 7 Switches and 7 UART Communication Selection 7 Reset Button 8 Connectors Table 8 Connectors Detailed Explanation 9 4 Electrical Characteristics 17 5 18 Preliminary Considerations and Safety Precautions 18 Initial Configuration 18 Hardware Setup 18 Auto-Mode Patch 19 Copyright 2011 Microsemi Analog Mixed Signal Group 1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308 PD-IM-7448E/A Evaluation Board - User Guide 1 About this Guide 0B Objectives 5B This user guide provides both a description and operation procedures for Microsemi's PD-IM-7448 Evaluation Board. This board is used to evaluate the performance of the Enhanced and Auto Mode PoE applications based PD69012 managers. Audience 6B This User Guide is intended for qualified personnel, meaning operators and technicians who have a background in basic electronics. Organization 7B This Guide is divided into several sections: Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 About this guide describes the objectives audience organization. Introduction gives an over view of the main functions, features, physical characteristics and ordering information. Physical description provides a physical description of the components switches, jumpers, connectors . Electrical characteristics list the electrical characteristics of the PoE evaluation board. Installation describes the installation process. Copyright 2011 Microsemi Analog Mixed Signal Group 1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308 PD-IM-7448E/A Evaluation Board - User Guide 2 Introduction 1B Microsemi’s PD-IM-7448 evaluation board see Figure 1 and 2 provides the designer with the needed environment to evaluate the performance and the implementation of PoE applications based on the PD69012 - PoE Manager and the PD69000 - PoE Controller. This board can be configured to support Enhanced and Autoc PoE operational modes. The PD-IM-7448 provides the customer with the ability to apply any PoE application while using different daughter boards DB connected to the top of the mother board MB . The document details the steps and connection instructions required to install and operate this board. The Evaluation Board enables PoE designers to evaluate Microsemi's PoE solution with maximum flexibility and ease in configuration. Figure 1 Mother Board - General View Figure 2 Daughter Board - General View Evaluation Board Ordering Information 8B The following table lists the EB ordering information. Ordering Number PD-DB-7448 48 ports PoE application, four PD69012 managers with the PoE controller PD69000 operating at the Enhanced or Auto mode Evaluation Board Features 9B • Designed to support any PoE DB application Auto/Enhanced mode, 12/24/48 ports • Four gangs each contains 12 X RJ45 connectors Copyright 2011 Microsemi Analog Mixed Signal Group 1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308 PD-IM-7448E/A Evaluation Board - User Guide • Vin connectors DC in connector • Port connection between MB to DB • Communication and indication interface connection between MB to DB using flat cables • Isolated USB to I2C interface • Isolated USB to UART interface • Isolated RS232 interface • LED stream interface • Daisy Chain option MB can be cascaded to another MB in order to support eight PD69012 with single PoE controller • External host interface • External power supplies interface • Reset push button • There are no pulse transformers & common mode chocks per port • Evaluation Board working temperature 0° to +50° C • ROHS compliant Evaluation Board Interfaces & Connections 10B The board has several interfaces: • RJ45 Running from the MB to the PD powered device J29-J30 • Ports interface Ports connection between the MB to the DB • Vin connectors DC in Vmain connection J6, J7, J15, J16 and J18 • Communication and indication Communication and indication signals transferred from the MB to the DB • External host Control and indication signals running between the hosting system to the MB J4 • Isolated USB to UART / USB to I2C communication between the hosting system to the MB U7 • Isolated RS232 Between the hosting system to the MB J33 • Isolated UART Between the hosting system to the MB J26 • LEDs LED indication to the LED board J16 • Daisy chain MB cascading option J8 • External power supplies 'Power good' signals coming from the power supplies indicating operational/failed power supply J1 • Tester Between the automatic tester and the MB • BDM PoE controller burning interface Physical Characteristics 1B Table 1 lists the evaluation board’s physical characteristics. Table 1 Physical Characteristics Parameter Mechanical dimensions Value 420 x 168 x 30mm l x w x h Copyright 2011 Microsemi Analog Mixed Signal Group 1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308 PD-IM-7448E/A Evaluation Board - User Guide 3 Physical Description 2B Package Contents 12B Upon opening the Evaluation Board package, verify that all parts itemized in the packing list are included. If any part is missing or seems damaged, contact your local representative or Microsemi's Customer Service Department. Package contents for standard shipments are as follows: • A GUI software CD • Power supply cable from the power supply unit to the MB • Power supply cable from the MB to the DB • Two flat cables 16 pin and 30 pin Switches and Jumpers 13B The evaluation board comprises switches and jumpers used to select the desired configuration states of the board. Default configurations are indicated as 'default'. UART Communication Selection 19B There are three UART communication options: • UART to USB connecting USB cable to U7 • UART to RS232 connecting RS232 cable to J33 • UART to UART connecting UART cable to J26 Using J11 and J12, these three options can be selected. Table 2 UART Communication Selection Switch/Jumper J11 J12 UART to RS232 N.C Short from pin "1" to "2" UART to USB Short from pin "1" to "2" N.C

PDF Datasheet Preview

PD-IM-7448E/A Evaluation Board - User Guide

PD-IM-7448E/A Evaluation Board User Guide

Document Issue Security Status Restricted

Date April 2014

PRODUCTION DATA Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time.

PD-IM-7448E/A Evaluation Board - User Guide

Reference Documents
• IEEE 802.3af-2003 Standard, DTE Power via MDI
• IEEE802.3at-draft1.0 Standard, DTE Power via MDI
• PD69012 Data Sheet, Catalogue Number 06-0069-058
• PD69000 Data Sheet, Catalogue Number 06-0070-058
• Application Note 175 Layout Design Guidelines for PoE Systems, Catalogue Number 06-
0055-080
• Application Note 174 Designing a 48-port Enhanced PoE System 802.3af/802.3at

Compliant, UART interface , Catalogue Number 06-0054-080
• Serial Communication Protocol User Guide, Catalogue Number 06-0032-056
• GUI installation User Guide, Catalogue Number 06-0037-056 The above documents can be obtained via Microsemi Customer Support. To access other documents, go to our web site at and under Tech and look up the relevant documents.

Copyright 2011

Microsemi

Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308

PD-IM-7448E/A Evaluation Board - User Guide

Table of Contents
1 About this Guide 4 Objectives 4 Audience 4
2 Introduction 5 Evaluation Board Ordering Information 5 Evaluation Board Features 5 Evaluation Board Interfaces & Connections 6 Physical 6
3 Physical Description 7 Package 7 Switches and 7 UART Communication Selection 7 Reset Button 8 Connectors Table 8 Connectors Detailed Explanation 9
4 Electrical Characteristics 17 5 18

Preliminary Considerations and Safety Precautions 18 Initial Configuration 18 Hardware Setup 18 Auto-Mode Patch 19

Copyright 2011

Microsemi

Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308

PD-IM-7448E/A Evaluation Board - User Guide
1 About this Guide 0B

Objectives 5B

This user guide provides both a description and operation procedures for Microsemi's PD-IM-7448 Evaluation Board. This board is used to evaluate the performance of the Enhanced and Auto Mode PoE applications based PD69012 managers.

Audience 6B

This User Guide is intended for qualified personnel, meaning operators and technicians who have a background in basic electronics.

Organization 7B

This Guide is divided into several sections:

Chapter 1 Chapter 2

Chapter 3 Chapter 4 Chapter 5
About this guide describes the objectives audience organization. Introduction gives an over view of the main functions, features, physical characteristics and ordering information. Physical description provides a physical description of the components switches, jumpers, connectors . Electrical characteristics list the electrical characteristics of the PoE evaluation board. Installation describes the installation process.

Copyright 2011

Microsemi

Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308

PD-IM-7448E/A Evaluation Board - User Guide
2 Introduction 1B

Microsemi’s PD-IM-7448 evaluation board see Figure 1 and 2 provides the designer with the needed environment to evaluate the performance and the implementation of PoE applications based on the PD69012 - PoE Manager and the PD69000 - PoE Controller. This board can be configured to support Enhanced and Autoc PoE operational modes. The PD-IM-7448 provides the customer with the ability to apply any PoE application while using different daughter boards DB connected to the top of the mother board MB . The document details the steps and connection instructions required to install and operate this board. The Evaluation Board enables PoE designers to evaluate Microsemi's PoE solution with maximum flexibility and ease in configuration.

Figure 1 Mother Board - General View

Figure 2 Daughter Board - General View
Evaluation Board Ordering Information 8B
The following table lists the EB ordering information.
Ordering Number PD-DB-7448
48 ports PoE application, four PD69012 managers with the PoE controller PD69000 operating at the Enhanced or Auto mode

Evaluation Board Features 9B
• Designed to support any PoE DB application Auto/Enhanced mode, 12/24/48 ports
• Four gangs each contains 12 X RJ45 connectors

Copyright 2011

Microsemi

Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308

PD-IM-7448E/A Evaluation Board - User Guide
• Vin connectors DC in connector
• Port connection between MB to DB
• Communication and indication interface connection between MB to DB using flat cables
• Isolated USB to I2C interface
• Isolated USB to UART interface
• Isolated RS232 interface
• LED stream interface
• Daisy Chain option MB can be cascaded to another MB in order to support eight PD69012
with single PoE controller
• External host interface
• External power supplies interface
• Reset push button
• There are no pulse transformers & common mode chocks per port
• Evaluation Board working temperature 0° to +50° C
• ROHS compliant

Evaluation Board Interfaces & Connections 10B

The board has several interfaces:
• RJ45 Running from the MB to the PD powered device J29-J30
• Ports interface Ports connection between the MB to the DB
• Vin connectors DC in Vmain connection J6, J7, J15, J16 and J18
• Communication and indication Communication and indication signals transferred from the

MB to the DB
• External host Control and indication signals running between the hosting system to the MB

J4
• Isolated USB to UART / USB to I2C communication between the hosting system to the

MB U7
• Isolated RS232 Between the hosting system to the MB J33
• Isolated UART Between the hosting system to the MB J26
• LEDs LED indication to the LED board J16
• Daisy chain MB cascading option J8
• External power supplies 'Power good' signals coming from the power supplies indicating
operational/failed power supply J1
• Tester Between the automatic tester and the MB
• BDM PoE controller burning interface

Physical Characteristics 1B

Table 1 lists the evaluation board’s physical characteristics. Table 1 Physical Characteristics

Parameter Mechanical dimensions

Value 420 x 168 x 30mm l x w x h

Copyright 2011

Microsemi

Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA Within the USA 800 713-4113, Outside the USA 949 221-7100 Fax 949 756-0308

PD-IM-7448E/A Evaluation Board - User Guide
3 Physical Description 2B

Package Contents 12B

Upon opening the Evaluation Board package, verify that all parts itemized in the packing list are included. If any part is missing or seems damaged, contact your local representative or Microsemi's Customer Service Department. Package contents for standard shipments are as follows:
• A GUI software CD
• Power supply cable from the power supply unit to the MB
• Power supply cable from the MB to the DB
• Two flat cables 16 pin and 30 pin

Switches and Jumpers 13B

The evaluation board comprises switches and jumpers used to select the desired configuration states of the board. Default configurations are indicated as 'default'.

UART Communication Selection 19B

There are three UART communication options:
• UART to USB connecting USB cable to U7
• UART to RS232 connecting RS232 cable to J33
• UART to UART connecting UART cable to J26 Using J11 and J12, these three options can be selected.

Table 2 UART Communication Selection

Switch/Jumper

J11 J12

UART to RS232 N.C Short from pin "1" to "2"

UART to USB Short from pin "1" to "2" N.C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PD-IM-7448E Datasheet file may be downloaded here without warranties.

Datasheet ID: PD-IM-7448E 649092